horntools HQF40010 Owner's manual

  • Hello, I have reviewed the provided installation instructions for the Quick Fist Long Arm Rubber Clamps, models 40010 and 40022. The document describes mounting options, including using bolts and screws, and explains how to secure the strap using the two posts. I am ready to answer your questions about these clamps and their installation.
  • In which direction the Long Arm QUICK FIST clamp can be mounted?
    What is the recommended mounting method?
    How to secure the strap after locking on the larger latching post?
Installation Instructions:
1. The Long Arm QUICK FIST clamp can be mounted in any direction; but
when mounted vertically, it is easier to release and engage the strap onto
the latching post, if the strap is hanging downward (as photo above).
2. Mount the clamp with either two 1/4” (6mm) bolts or two #14 wood or
sheet metal screws and two 1/4” (6mm) washers. Snug screws or bolts.
Do not over tighten, as rubber just spreads.
3. After locking the strap on the larger latching post, either pull the strap tighter
and use the small post as an additional lock (see illustration 1); or roll the
remainder of the strap inward and fasten on the small post (see illustration
2).
Item #40010 & 40022
Made in USA
End of the Road, Inc
2212 Dortch Ave.
Nashville, TN 37210, USA
www.endroad.com
U.S. and world wide patents pending
UK patent 2403262
LONG ARM
One Piece Rubber Clamp
illustration 2
illustration 1
Installation Instructions:
1. The Long Arm QUICK FIST clamp can be mounted in any direction; but
when mounted vertically, it is easier to release and engage the strap onto
the latching post, if the strap is hanging downward (as photo above).
2. Mount the clamp with either two 1/4” (6mm) bolts or two #14 wood or
sheet metal screws and two 1/4” (6mm) washers. Snug screws or bolts.
Do not over tighten, as rubber just spreads.
3. After locking the strap on the larger latching post, either pull the strap tighter
and use the small post as an additional lock (see illustration 1); or roll the
remainder of the strap inward and fasten on the small post (see illustration
2).
Item #40010 & 40022
Made in USA
End of the Road, Inc
2212 Dortch Ave.
Nashville, TN 37210, USA
www.endroad.com
U.S. and world wide patents pending
UK patent 2403262
LONG ARM
One Piece Rubber Clamp
illustration 2
illustration 1
/