Goodway TFC-200 User guide

Brand: Goodway

Model: TFC-200

Type: User guide

Goodway TFC-200 is a versatile and efficient tool designed to maintain and clean cooling towers. It features easy chemical application, thorough rinsing capabilities, and a compact design for convenient storage. With its ability to handle various cleaning tasks, from pre-rinsing to chemical application and final rinsing, the TFC-200 ensures optimal cleaning performance.

Goodway TFC-200 is a versatile and efficient tool designed to maintain and clean cooling towers. It features easy chemical application, thorough rinsing capabilities, and a compact design for convenient storage. With its ability to handle various cleaning tasks, from pre-rinsing to chemical application and final rinsing, the TFC-200 ensures optimal cleaning performance.

TFC-200 Quick Start Guide

PLEASE REVIEW

IMPORTANT SAFETY

INSTRUCTIONS

LOCATED IN

OPERATORS MANUAL

Proper Startup

Essentials

* Accessories sold separately

Raise dip tube for chemical

siphoning. Lock/ unlock collar

as needed.

1

Connect blue chemical hose to quick connect

output on the back of the unit, then connect the

spray gun to female quick connect.

3

Insert

chemical

container

& strap in

securely.

Lower the

dip tube.

2

Connect water hose to water inlet

on the spray gun. Turn on

water supply.

4

Pull trigger on the spray gun until water starts coming out of the

gun. Connect proper nozzle based on the nozzle chart.

5

Connect GCFI to

outlet, test and

reset to ensure

it’s functioning.

6

Attach pre-rinse nozzle to spray gun (refer

to nozzle chart). Rotate ball valve lever to

RINSE setting. Flip toggle switch to RINSE/

MIX to turn on unit. To turn off, toggle

switch up to center position.

• Thoroughlyrinsetowerll.

Attach chemical nozzle to spray gun (refer to

nozzle chart). Rotate ball valve lever to CHEMICAL

setting. Flip toggle switch to CHEMICAL to turn

on unit. To turn off, toggle switch down to

center position.

• Thoroughlyapplychemicaltotowerll.

• IMPORTANT: ALLOW CHEMICAL TO DWELL

ON TOWER FILL FOR AT LEAST ONE HOUR.

PRE-RINSING

TOWER FILL

CHEMICAL APPLICATION

GOODWAY® TECHNOLOGIES CORPORATION

420 West Avenue, Stamford, CT 06902 USA

Tel: 203-359-4708 · Toll-Free Tel: 800-243-7932

Fax: 203-359-9601 · Toll-Free Fax: 800-359-9625

Email: goodway@goodway.com

Visit: www.goodway.com

HVAC & FACILITY MAINTENANCE SOLUTIONS

RINSE APPLICATION

SHUTDOWN

Attach large black rinse nozzle to spray gun (refer

to nozzle chart). Rotate ball valve lever to RINSE

setting. Flip toggle switch to RINSE/MIX to turn on

unit. To turn off, toggle switch up to

center position.

• Aggressively rinse tower till until chemical is

thoroughly washed away.

• Repeat Steps 1-3, if desired, for a better clean.

After use, raise dip tube and place cap on chemical container before

unstrapping and removing from rear compartment.

CAUTION: Do not travel with chemical container inside unit!

Run clean water through the unit from both the water intake and a clean

bucket of water through the dip tube to rinse internal components. Neutralize

cooling tower water by adding one 25 pound pail of Goodway Scalebreak

Neutralizer per each 5 gallon container of ScaleBreak-Gel™ to the water

in the basin to achieve a neutral pH. Refer to Operation Manual for more

detailed instructions.

1
2
3
4
5

Goodway TFC-200 User guide

Brand: Goodway

Model: TFC-200

Type: User guide

Goodway TFC-200 is a versatile and efficient tool designed to maintain and clean cooling towers. It features easy chemical application, thorough rinsing capabilities, and a compact design for convenient storage. With its ability to handle various cleaning tasks, from pre-rinsing to chemical application and final rinsing, the TFC-200 ensures optimal cleaning performance.

Download PDF

Related papers

Other documents