2. Milesight
  3. NVR
NVR

Milesight NVR Installation guide

  • Hello! I've reviewed the Milesight NVR hard disk installation manual. This document provides detailed, step-by-step instructions for installing hard disks in both MS-N7000 and MS-N8000 series NVRs, including diagrams and information about the connectors. I am ready to answer your questions about the installation process or other related topics mentioned in the document.
  • What is the first step for installing a hard disk in an MS-N7000 series NVR?
    What is specific for MS-N8000 series NVR hard disk installation?
    What should be the direction of SATA slots when installing a hard disk?
1
Milesight-Troubleshooting
NVR Hard Disk Installation
1
NVR Hard Disk Installation
1
1. MS-N7000 series Hard Disk Installation
Step1: Unscrew the back and both sides’ screws to open the upper lid.
Figure 1-1
Figure 1-2
NVR Models
MS-N7016/MS-N8016
Update
2
NVR Hard Disk Installation
2
Figure 1-3
Step2: Install the hard disks into NVR with screws showed in below
pictures.(SATA Slots of hard disk should be toward inside NVR.)
Figure 1-4
3
NVR Hard Disk Installation
3
Figure 1-5
Figure 1-6
4
NVR Hard Disk Installation
4
Step3: Join the power and data connectors to corresponding hard disk.
Figure 1-7
Figure 1-8
5
NVR Hard Disk Installation
5
Figure 1-9
Note:
The data connector sequence of MS-N7000 series is different from MS-N8000
series’.
2. MS-N8000 series Hard Disk Installation
Step1: Unscrew the back and both sides’ screws to open the upper lid.
6
NVR Hard Disk Installation
6
Figure 2-1
Figure 2-2
7
NVR Hard Disk Installation
7
Figure 2-3
Step2: Uninstall the upper hard disk panel.
8
NVR Hard Disk Installation
8
Figure 2-4
Step3: Install the hard disks into NVR with screws showed in below
pictures.(SATA slots of hard disks should be toward inside NVR)
9
NVR Hard Disk Installation
9
Figure 2-5
Figure 2-6
10
NVR Hard Disk Installation
10
Figure 2-7
Figure 2-8
11
NVR Hard Disk Installation
11
Note:
Make sure that the sata slots are in SHORT HALF side and the sata slot
toward inside NVR.
Step4: Join the power connectors to corresponding hard disks.(Install lower
hard disk panel before upper one)
Figure 2-9
Figure 2-10
12
NVR Hard Disk Installation
12
Step5: Join the data connectors to corresponding hard disk.(Check the
connection by below sequence)
Figure 2-11
Note:
The data connector sequence of MS-N7000 series is different from MS-N8000
series’.
-END-
/