o Setthemonth
Ifthemonthisnotcorrect:
• presstheupbutton
toincreasethemonth
• pressthedownbutton
todecreasethemonth
Oncethemonthiscorrect,pressthesetbuttonagain
o Setthetime
Ifthetimeisnotcorrect:
• presstheupbutton
toincreasethehoursandminutes
• pressthedownbutton
todecreasethehoursandminutes
Oncethetimeiscorrect,presstheStart/Stopb utton
¾ PlacetheuserselectionswitchtoUserA.
¾ Followtheinstructionsinthemanual pages26‐29onapplyingthearmcuff
¾ Takeameasurementwithyourbloodpressuremonitor
o PresstheStart/Stopbutton.
o Thearmcuffwillstarttoinflateautomaticallytakingameasurement.
o Whenthemeasurementiscomplete,bloodpressureandpulseratearedisplayed.
Step2:GetreadytouseyourbloodpressuremonitorwithHealthVault™
¾ IfHealthVaultConnectionCenterisnotrunningonyourcomputer,pleasestartitandsigninto
youraccount.ConnectionCenterthenwillopentoascreen showingyourdevice(s).
¾ SelecttheOmronBloodPressuredevicepictureonthelefthandsideofConnectionCenter.
¾ IfyoudonotseeapictureofyourdeviceinConnectionCenter,selectSetupanewdeviceand
followtheon‐screeninstructions.
Step3:ConnectyourOmron10Series+™BloodPressureMonitorto
yourcomputeranduploadyourreadingtoHealthVault™
¾ PresstheStart/Stopbuttontoturnthemonitoroff.
¾ FindtheUSBcablethatcamewithyourbloodpressuremonitor.
¾ PlugthesmallendofyourUSBcableintotheslotonyourbloodpressuremonitorthat'smarked
withtheUSBsymbol.
¾ PlugthelargeendofyourUSBcableintoyourcomputer.
¾ Thesymbol“
□”willstartcirclingonthebloodpressuremonitordisplaywhenitissuccessfully
connectedtothecomputer.Afterseveralsecondsthebloodpressuredisplaywillbeblank.
NOTE: If the USB cable was connected when you took the last measurement, please disconnect and
connect the cable again. Also, do not unplug the USB connector until the data has finished uploading.
2