Omron HEM-670IT Getting Started

Brand: Omron

Model: HEM-670IT

Category: Blood pressure units

Type: Getting Started

1



GettingStartedwithyourOmronHEM670ITBloodPressureMonitor

andMicrosoft®HealthVault™

Welcome!

Thisguidewillshowyouhowtosetupyour Omron Blood Pressure Monitor (Model HEM-670IT) to work

with Microsoft HealthVault.

Withthisguide,youwill:

1. Setupyourbloodpressuremonitorandtakeatestreading.

2. GetreadytouseyourbloodpressuremonitorwithHealthVault.

3. Connectyourbloodpressuremonitortoyourcomputeranduploadyourtestreadingto

HealthVault.



IMPORTANT:IfyouhavenotalreadycreatedyourHealthVaultaccountandinstalledHealthVault

ConnectionCenter,pleasegotohttp://healthvault.com/connectioncenterandfollowtheinstructions.

Let’sgetstarted!

Step1:Setupyourbloodpressuremonitorandtakeatestreading

IMPORTANT:YouwillNOTbeusingtheCDincludedwiththedeviceandmaysetitaside.

IMPORTANT: The blood pressure monitor should not be connected to your computer

while you are taking a measurement. Before taking a measurement, please disconnect

the USB cable.

¾ Openyourbloodpressuremonitorpackaging.Remember,youwillNOTbeusingtheCD

includedwiththedeviceandmaysetitaside.

¾ Removethedevice,cuff,cords,andbatteriesfromtheirplasticpackaging.

¾ InstallthefourAAbatteriesincludedorconnecttheACadapter.

¾ Setthedateandtimeonyourdeviceasdescribedbelow:

o Ifthedeviceison,turnitoffbypressingthestart/stopbutton

o Pressandholdthe‘Set’Buttonuntilthescreendisplaysaflashing‘off’

o Pressthesetbuttonagain

o Settheyear

 Iftheyearisnotcorrect,pressthebuttononthelowerrighttoadjust

 Oncetheyeariscorrect,pressthesetbuttonagain

o Setthemonth

 Ifthemonthisnotcorrect,pressthebuttononthelowerrighttoadjust

 Oncethemonthiscorrect,pressthesetbuttonagain

o Setthetime

 Ifthetimeisnotcorrect,pressthebuttononthelowerrighttoadjust

 Oncethetimeiscorrect,presstheStart/Stopbutton

2



¾ PlacetheuserselectionswitchtoUserA.

¾ Followtheinstructionsinthemanualpages23‐26onapplyingthearmcuff

¾ Takeameasurementwithyourbloodpressuremonitor

o PresstheStart/Stopbutton.

o Thearmcuffwillstarttoinflateautomaticallytakingameasurement.

o Whenthemeasurementiscomplete,bloodpressureandpulseratearedisplayed.

Step2:GetreadytouseyourbloodpressuremonitorwithHealthVault

¾ IfHealthVaultConnectionCenterisnotrunningonyourcomputer,pleasestartitandsigninto

youraccount.ConnectionCenterthenwillopentoascreenshowingyourdevice(s).

¾ SelecttheOmronBloodPressuredevicepictureonthelefthandsideofConnectionCenter.

¾ IfyoudonotseeapictureofyourdeviceinConnectionCenter,selectSetupanewdeviceand

followtheon‐screeninstructions.

Step3:ConnectyourOmronBloodPressureMonitortoyourcomputer

anduploadyourreadingtoHealthVault

¾ PresstheStart/Stopbuttontoturnthemonitoroff.

¾ FindtheUSBcablethatcamewithyourbloodpressuremonitor.

¾ PlugthesmallendofyourUSBcableintotheslotonyourbloodpressuremonitorthat'smarked

withtheUSBsymbol.

¾ PlugthelargeendofyourUSBcableintoyourcomputer.

¾ Thesymbol“□”willstartcirclingonthebloodpressuremonitordisplaywhenitissuccessfully

connectedtothecomputer.Afterseveralsecondsthebloodpressuredisplaywillbeblank.

NOTE: If the USB cable was connected when you took the last measurement, please disconnect and

connect the cable again. Also, do not unplug the USB connector until the data has finished uploading.

HealthVaultConnectionCenterwillsensewhenyourdevicehasbeenconnectedtoyourcomputerand

willpromptyoutouploadyourtestreading.

¾ Followtheon‐screenprompts.

Youwillseeconfirmationwhenyouruploadiscomplete.Atthatpointyoumayunplugyourblood

pressuremonitorfromyourcomputer.

ToseeyourreadinginyourHealthVaultaccount:

¾ OpenyourInternetbrowserandgotohttp://Healthvault.com.(Youwillbeaskedtosigninif

youhaven'taccessedyouraccountinthepast20minutes.)

¾ ClickyourHealthinfotab.

Wheneveryouhavetakennewreadingswithyourdevice,youcanfollowthestepsoutlinedin“Step3”

ofthisguidetouploadthereadingstoHealthVaultandbettermanageyourhealthandfitness.

3



ForfurtherhelpusingyourOmronbloodpressuremonitorwithHealthVault:

¾ GototheTroubleshootingguide.

¾ Refertotheprintedinstructionsthatcamewithyourdevice.

¾ PhoneOmronCustomerService:1(800)634‐4350

¾ Gotohttp://www.omronhealthcare.com



Microsoft,HealthVaultandtheHealthVaultlogo,WindowsandtheWindowslogo,WindowsLiveand

theWindowsLiveIDlogo,WindowsVistaandtheWindowsVistalogo,andInternetExplorer,are

trademarksoftheMicrosoftgroupofcompanies.Allothertrademarksarepropertyoftheirrespective



Omron HEM-670IT Getting Started

Brand: Omron

Model: HEM-670IT

Category: Blood pressure units

Type: Getting Started

Download PDF

report

Omron HEM-670IT Getting Started

Omron HEM-670IT Getting Started

Related papers

Other documents

Omron HEM-­670IT Getting Started

Omron HEM-­670IT Getting Started

Related papers

Other documents

Omron HEM-670IT Getting Started

Omron HEM-670IT Getting Started