Astonica 50105060 User manual

Type
User manual

This manual is also suitable for

Astonica 50105060 is a sturdy and stylish 42-inch round dining table, perfect for any home. With its classic design and durable construction, this table is sure to be a centerpiece for your dining room for years to come. The table is easy to assemble, with all the necessary hardware included. Simply follow the step-by-step instructions and you'll have your table up and running in no time. The table is also easy to clean, with a smooth surface that can be wiped down with a damp cloth.

Astonica 50105060 is a sturdy and stylish 42-inch round dining table, perfect for any home. With its classic design and durable construction, this table is sure to be a centerpiece for your dining room for years to come. The table is easy to assemble, with all the necessary hardware included. Simply follow the step-by-step instructions and you'll have your table up and running in no time. The table is also easy to clean, with a smooth surface that can be wiped down with a damp cloth.

011010rev1
®
Made in China
©2010 World Factory, Inc.
Distributed by:
World Factory, Inc.
Westlake, TX 76262
Model No: 50105060
Delta 42"
Round Dining Table
Instruction Manual
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.
For warranty information, please refer to the back page of
this instruction manual.
Limited Warranty
World Factory, Inc. Products for Home Use
World Factory, Inc. (Seller) warrants to the original Buyer only, that each Astonica Product will be free
from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE
SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY
FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER
MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This
warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to
normal use or weathering. To make a claim under this Limited Warranty, you must return the complete
product with proof of purchase, transportation prepaid, to any World Factory, Inc. authorized service
center. Call 1-888-422-7800 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)
YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF
PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This warranty gives you special legal rights, and you may also have other rights which vary from state
to state.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
ASSEMBLY INSTRUCTIONS
CAUTION: Do not over tighten fasteners.
A
B
C
D
F
G
E
Figure 1
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A Table Top 1
B Table Legs 4
C Leg Connector Bracket 1
D Plastic Screw Cap 8
E Lock Washer 8
F Hex Head Screw 8
G Hex Key 1
A
C
E F
B
1. Place the table top (A) upside down on a flat non-scratch surface.
2. Locate end cap leg fittings underneath the table top rim.
3. Insert table legs (B) into end cap leg fittings of table top (A).
4. Place leg connector bracket (C) between table legs (B) and secure
with hex head screws (F), and lock washers (E). Finger tighten only.
Repeat this step for all four legs.
5. Carefully rotate table assembly to upright position. Tighten screws (F)
with hex key (G) in a cross corner "X" fashion.
6. Insert plastic screw caps (D) over hex head screws (F).
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
End Cap Leg Fitting
Parts Detail
1
NOTE: This product is intended for residential, non-commercial use.
2
D
  • Page 1 1
  • Page 2 2

Astonica 50105060 User manual

Type
User manual
This manual is also suitable for

Astonica 50105060 is a sturdy and stylish 42-inch round dining table, perfect for any home. With its classic design and durable construction, this table is sure to be a centerpiece for your dining room for years to come. The table is easy to assemble, with all the necessary hardware included. Simply follow the step-by-step instructions and you'll have your table up and running in no time. The table is also easy to clean, with a smooth surface that can be wiped down with a damp cloth.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI