AEG USR 400 Operating Instructions Manual

Brand: AEG

Model: USR 400

Category: Slicers

Type: Operating Instructions Manual

USR 400/420

Universalschneider

Universal Slicer

Trancheuse universelle

Universele snijmachine

Affettatrice universale

Rebanadora universal

Gebrauchsanweisung

Operating instructions

Mode d’emploi

Gebruiksaanwijzing

Istruzioni per l’uso

Instrucciones para el uso

Gesamtansicht

Dear Customer,

Please read these operating instruc-

tions carefully. Above all please

observe the safety instructions on

the initial pages of these operating

instructions! Please keep these operat-

ing instructions for future reference.

Pass them on to any subsequent owner

of the appliance.

Description of the Appliance

(see General View)

A On/Off switch

BStop plate

C Food carriage

D Slice thickness adjustment knob

E Sliced food collecting tray

(Type USR 400 only)

FHousing

G Circular blade

HHolder

JBlade lock

K Cord storage

L Connecting lead

M Rating plate (bottom of appliance)

1 Safety Information

• Prior to using for the first time, please

note that the appliance may only be

used with the voltage and type of cur-

rent that is stated on the rating plate.

• Only connect the appliance to a socket

that has been installed in accordance

with regulations.

• Never put the appliance on hot sur-

faces or near naked flames.

• Always ensure that the mains lead can-

not come into contact with items that

are hot or have sharp edges.

• Do not kink the mains lead or wrap it

around the appliance. Always use the

cord storage that is an integral part of

the appliance.

• Do not push hard items against the

blade when it is rotating and keep your

hands well away from the blade. Seri-

ous injury can be caused!

• Plastic parts must not be placed on or

close to radiators.

• The Universal Slicer is a household

appliance and therefore not suitable

for commercial use.

• The Universal Slicer may only be used

once it has been positioned in accord-

ance with instructions.

• Never slice frozen food.

(The appliance could be damaged). Use

the appliance only for slicing ordinary

household foods; do not use it for any

other purpose. Do not slice frozen

foods, bones, foods with large stones,

roasting joints in nets, or foods that

are still in their packaging!

• Always use the food carriage when

slicing (General View/C). The food car-

riage and holder (H) should only be

removed when the shape and size of

the food to be sliced (e.g., bread) do

not permit their use.

• Switch the appliance off at the latest

after 5 minutes of uninterrupted use,

as the Universal Slicer is designed to be

operated for a maximum of 5 minutes.

• Return the stop plate (General View/B)

to its starting position (0) after each

use to avoid its being damaged by the

circular blade (G).

• Before cleaning any parts and before

changing the blade return the stop

plate to the starting position (0) and

remove the mains plug.

• Never immerse the appliance in water

or bring it into contact with water in

any way. Note the information for

cleaning!

Warning:

• after the appliance is switched off,

the circular blade continues to

rotate for a short time.

• Children do not perceive the dangers

that can arise when using electrical

appliances and slicers. For this reason

never allow children to “play” with or

use this appliance without supervision.

Never leave the appliance running

when it is unattended.

• Check the mains cord from time to

time for damage. If any damage is

present have the mains cord changed

immediately.

In the event that a repair becomes nec-

essary, including replacing the mains

lead, the appliance must be returned

to the specialist dealer where it was

bought or to an authorised AEG cus-

tomer service centre. Repairs to electri-

cal appliances may only be carried out

by qualified specialists. Repairs carried

out by inexperienced persons may

cause serious injury to the user. No

responsibility can be accepted if the

appliance is used incorrectly or for the

wrong purposes.

Technical Data

Power consumption: 110 W

Mains voltage: 230 V

;

This appliance complies with the fol-

lowing EU Directives:

• 73/23/EEC dated 19.2.1973 “Low

Voltage Directive”, including

Amending Directive 93/68/EEC.

• 89/336/EEC dated 3.5.1989 “EMC

Directive”, including Amending

Directive 92/31/EEC.

• 89/109/EEC Foodstuffs Directive.

Positioning the Appliance

The Universal Slicer should be posi-

tioned on a level, clean and dry work

surface where the non-slip rubber feet

will ensure that the appliance is secure

and does not move. We recommend

wiping all parts with a slightly damp

cloth and then drying before using for

the first time.

Prior to Using

• Unwind the required length of con-

necting lead (L) from the cord storage

(K) under the appliance (Fig. 1).

• Check that the appliance is stable and

connect to the mains using the mains

plug.

• Applying firm pressure to the rear slid-

ing surface, push the food carriage (C)

into the guiding groove on the appli-

ance (Fig. 2).

• Slide the holder (H) onto the handle of

the food carriage (Fig. 3).

• Set the required cut thickness. To do

this, turn the slice thickness adjust-

ment knob (D) anticlockwise (Fig. 6).

The slices can be set to any thickness

between thin and approx. 22 mm. The

graduations on the slice thickness

adjustment knob do not represent mil-

limetres, but serve only as points of

reference. For safety reasons the start-

ing position (0) is designed to cover the

blade.

Switching On the Universal Slicer

Using the On/Off switch (A) it is possi-

ble to switch the appliance on and off

in two operating modes (Fig. 4):

• Pulse: press switch to position II. The

circular blade (G) will rotate for as long

as the switch stays pressed in this posi-

tion.

• To stop pulse operation: release the

switch and wait until the circular blade

has come to a complete standstill.

• Continuous (max. 5 minutes):

engage the switch in position I. The

circular blade will rotate without the

need to hold the switch down.

• To stop continuous operation: press

the switch briefly to position II and

wait until the blade has come to a

complete standstill.

Please note: after the appliance is

switched off, the circular blade contin-

ues to rotate for a short time.

For safety reasons, after each use

please return the stop plate (B) to the

starting position (0) using the slice

thickness adjustment knob (Fig. 6).

Instructions for Use

To operate the Universal Slicer safely

and to obtain even slices, place the

food to be sliced on the food carriage

and press the food gently against the

stop plate, if possible using the holder

(Figs. 7 and 8). With the blade rotating,

guide the food carriage with the food

to be sliced towards and against the

circular blade, applying slight pres-

sure. After use return the stop plate to

the starting position (0) using the slice

thickness adjustment knob.

Collecting the Sliced Food

Either place, for example, a plate in the

recessed area of the housing (F; for

Type USR 420) or pull the sliced food

collecting tray (E) to the left and out

from the appliance (Fig. 5, Type

USR 400 only).

Removing the Circular Blade

Before removing the circular blade it is

essential to return the stop plate to the

starting position (0) and remove the

mains plug. Please bear in mind when

carrying out the following steps that:

the circular blade is very sharp!

Insert a coin in the blade lock (General

View/J and Fig. 9) and turn it clockwise

(left-handed thread).

Holding the circular blade by the cen-

tre of turn, press against it gently from

behind and remove (Fig. 10).

Wash it by hand in warm soapy water,

not in a washing machine! Clean the

housing (F) behind the blade with a dry

cloth or a brush.

Fitting the Circular Blade

Position the circular blade, if necessary

turning slightly, in the housing cover.

The entire blade must lie within the

recess of the housing cover and stop

plate. Screw in the blade lock in an

anticlockwise direction (left-hand

rotation) and tighten.

Cleaning

The circular blade must be stationary

before the slicer is cleaned. Before

cleaning it is essential to return the

stop plate to the starting position (0)

and remove the plug from the mains.

Clean the appliance thoroughly from

time to time as perishable food

remains can collect on the appliance

and behind the circular blade (G).

Clean the motor unit with a damp

cloth. The remaining parts can be

washed in water by hand as usual or

washed in a dishwasher at a maximum

temperature of 50 °C.

Wash the circular blade carefully by

hand (risk of injury) in warm soapy

water, not in the dishwasher (rust spots

can form).

Never stand or immerse the Univer-

sal Slicer in water.

Disposal

When disposing, remove the mains lead

and take the appliance to a place

where it can be recycled (e.g., precious

metal recycling centre).

2 For the Sake of the

Environment

Do not simply throw packaging mate-

rial away. Please note the following

information:

• The cardboard packaging can be

recycled in the waste paper collec-

tion.

If used:

• Deposit plastic bags made from pol-

yethylene (PE) at a PE collection

point for recycling.

• Padding materials made of expanded

polystyrene (PS) are CFC-free and

should be taken to an appropriate

public refuse site (recycling centre).

Please inquire with your local authority

about your local recycling centre.

Customer Service

Our products are of the highest quality.

Only with your support can we be sure

to develop and bring appliances onto

the market to suit your needs.

Should you nevertheless have ques-

tions concerning the use of this appli-

ance, please write to us.

Garantiebedingungen

Für dieses Gerät leisten wir - zusätzlich zu

der gesetzlichen Gewährleistung des

Händlers aus Kaufvertrag - dem Endabneh-

mer gegenüber zu den nachstehenden Be-

dingungen Garantie:

1. Die Garantiezeit beträgt 12 Monate und

beginnt mit dem Zeitpunkt der Übergabe

des Geräts, der durch Rechnung oder

andere Unterlagen zu belegen ist. Die

Garantiezeit ist auf 6 Monate beschränkt,

wenn das Gerät gewerblich genutzt wird.

2. Die Garantie umfaßt die Behebung aller

innerhalb der Garantiezeit auftretenden

Schäden oder Mängel des Geräts, die

nachweislich auf Material- oder Ferti-

gungsfehlern beruhen. Nicht unter die

Garantie fallen Schäden oder Mängel aus

nicht vorschriftsmäßiger Handhabung

sowie Nichtbeachtung der Gebrauchsan-

weisungen.

3. Im Garantiefall senden Sie das Gerät an

die für Ihren Wohnort zuständige AEG

Kleingeräte-Zentralwerkstatt oder über-

geben es Ihrem Fachhändler.

Bei Einsendung achten Sie bitte auf gute

Verpackung, Ihre vollständige Absender-

Anschrift und eine kurze Fehlerbeschrei-

bung. Fügen Sie zum Nachweis Ihres

Garantieanspruchs den Kaufbeleg bei.

4. Die Garantieleistungen werden ohne jede

Berechnung durchgeführt; sie bewirken

weder eine Verlängerung noch einen

Neubeginn der Garantiezeit. Ausgewech-

selte Teile gehen in unser Eigentum über.

Guarantee

This appliance is covered by the following

guarantee and is in addition to your statuto-

ry and other legal rights. All components

which fail due to defective manufacture will

be repaired or replaced free of charge for a

period of 12 months from the date of

purchase. We will not accept claims if un-

authorised modification is made or if non-

standard components are used. The appli-

ance must be used in accordance with the

operating instructions and the guarantee

does not cover any damage caused during

transit or through misuse. In order to esta-

blish the date of purchase, advice note or si-

milar document must be produced whenever

the guarantee is claimed.

Garantie

Pour toute mise en œvre de garantie ou de

service après vente, vous devez yous adresser

à votre vendeur.

AEG assure au vendeur le remplacement gra-

tuit des pièces détachées nécessaires à la ré-

paration pendant 1 an, à partir de la date de

votre facture, sauf en cas de non respect des

prescriptions d’utilisation ou lorsqu’une cau-

se étrangère à l’appareil est responsable de la

défaillance.

Les dispositions stipulées ci-dessus ne sont

pas exclusives du bénéfice au profit de

l’acheteur de la garantie légale pour défaut

et vice cachés qui s’applique, en tout état de

cause, dans les conditions des articles 1641 et

suivants, du code civil.

Garantie

AEG Huishoudelijke Apparaten neemt voor

reparaties binnen de garantietermijn - voor

zover de defecten zijn terug te voeren op

materiaal - en/of constructiefouten - de ko-

sten op zich voor materiaal en arbeidsloon.

De garantie bedraagt 12 maanden en gaat in

op de dag van aankoop. Wanneer garantie

wordt verlangd, dient de faktuur can aanko-

op te worden overlegd. De garantietermijn

wordt door reparaties niet verlengd. Buiten

elke garantieverplichting vallen losse onder-

delen van glas en/of kunststof. Alle overige

kosten, zoals voorrijdkosten, kosten van op-

zending en administratie, zijn voor rekening

van de eigenaar.

Garanzia

Duranti i primi 12 mesi d’esercizio, vengono

fornite gratuitamente dall’AEG le parti di ri-

cambio riconosciute difettose. La garanzia ha

inizio con il giorno dell’acquisto che deve ve-

nir comprovato a mezzo della fattura o bo-

letta di consegna. Per il resto valgono le

condizioni generali di fornitura della rispetti-

va rappresentanza nazionale.

Garantia

Durante los primeros 12 meses, la AEG se

hace cargo de cuantos costes de material y

horas de trabajos invertidas se produzcan en

la subsanación de defectos. La garantia em-

pieza a regir a partir de la fecha de la entre-

ga, la que deberá justificarse mediante

presentación de la factura o de la nota de de-

pacho. Por lo demás serán de aplicación las

condiciones generales de venta se gun rigen

en el respectivo pais de nuestra representa-

ción.

Garantie

In Belgien ist nur die durch belge AEG ausge-

gebene Garantiekarte gültig.

En Belgique, seule la carte de garantie émise

par la belge AEG est valable.

In België is slechts de door de belge AEG uit-

gegeven waarborgkaart geldig.

AEG Kundendienst in Europa

Deutschland

Sollte dieses AEG Kleingerät wider Erwarten nicht

funktionieren, senden Sie es bitte an folgende Adresse:

Beginnt die Postleitzahl Ihres Wohnortes

mit 2 - 3 - 4 - 5

AEG Kleingeräte-Zentralwerkstatt

Firma Elektro Stefan Irsen

Sachtlebenstraße 1, 41541 Dormagen

Beginnt die Postleitzahl Ihres Wohnortes

mit 0 - 1 - 6 - 7 - 8 - 9

AEG Kleingeräte-Zentralwerkstatt

Firma Trepesch GmbH

Steinstraße 500, 90419 Nürnberg

In Deutschland stehen wir Ihnen für Fragen, Anregungen

oder bei Problemen rund um unsere Kleingeräte und

Raumpflegegeräte montags bis freitags von 8 bis 18 Uhr

zur Verfügung.

AEG Serviceline unter 01805-30 60 80*

Fax: 0911/ 3 23-49 19 30

E-Mail: service.kleingeraete@aeg-hausgeraete.de

*(Deutsche Telekom 24 Pf/Min.)

Österreich, 4010 Linz, 0732 / 770101 - 30

Belgique/België, 1502 Lembeek, 02/363.04.44

Czech Republic, AEG Domaci spotebice, Praha 4, 1140 00

Danmark, 7000 Fredericia, 70 11 74 00

España, Madrid, 1-885-2700

France, 60307 Senlis, 03-44 62 24 24

Great Britain, Service Force 08705 929 929

Hellas, 18346 MOÓXATO, 01/4822646

Island, Reykjavik (Bræóurnir Ormsson hf), 91-3 88 20

Italia, 20394 Agrate Brianza (Milano), 39 / 68 99-8 39

Kroatien, 10000 Zagreb, 385 1 6323 333

Luxembourg, 1273 Luxembourg-Hamm, 4 24 31-433

Magyarország, 1142 Budapest, 36-1-252-773

Nederland, 2400 AC Alphen aan den Rijn, 0172-468 300

Norge, 0516 Oslo, 22 72 58 00

Portugal, 2635-445 Rio de Mouro, (01) 926 75 75

Romania, 713421 Bucaresti, 01-230-8730

Slovakia, 81105 Bratislava, 07/4333 9757

Slovenija,

Tražaška 132, 1000 Ljubljana, 01 24 25 730

Schweiz/Svizzera, 5506 Mägenwil, 0848 848 348

Suomi, Porissa, puh. (02) 622 3300

Sverige, 10545 Stockholm, 08-738 60 00

Turkey, Tarlabasi cad no:35 Taksim/Istanbul-0, 262-7249420

Russia, 129090 Moscow, +7 095 956 2917, 937 7893

Änderungen vorbehalten

AEG USR 400 Operating Instructions Manual

Brand: AEG

Model: USR 400

Category: Slicers

Type: Operating Instructions Manual

Download PDF

report

in other languages

français: AEG USR 400

AEG USR 400 Operating Instructions Manual

AEG USR 400 Operating Instructions Manual

in other languages

Related papers

Other documents