Greenes Fence RC48967 Installation guide

Greenes Fence
Brand
Greenes Fence
Model
RC48967
Type
Installation guide

Greenes Fence RC48967 is an original cedar raised garden bed that can be stacked for more height. It is 4ft. wide x 8ft. long x 7in. high, and comes with six screws, six 8in. x 2.5in. x 2.5in. short posts, fourteen 4ft. x 3.5in. boards, and six 3.5in. x 3.5in. decorative caps. The garden bed is easy to assemble, and can be used to grow a variety of plants, including vegetables, herbs, and flowers. It is also a great way to add a touch of style to your backyard or patio.

Greenes Fence RC48967 is an original cedar raised garden bed that can be stacked for more height. It is 4ft. wide x 8ft. long x 7in. high, and comes with six screws, six 8in. x 2.5in. x 2.5in. short posts, fourteen 4ft. x 3.5in. boards, and six 3.5in. x 3.5in. decorative caps. The garden bed is easy to assemble, and can be used to grow a variety of plants, including vegetables, herbs, and flowers. It is also a great way to add a touch of style to your backyard or patio.

Questions? Email info@greenesfence.com or call 800-622-5510 Monday - Friday 8am-5pm EST
ORIGINAL CEDAR RAISED GARDEN BED | ASSEMBLY INSTRUCTIONS
MODEL #
RC
DIMENSIONS
4ft. wide x 8ft. long
x 7in. high
PACKAGE CONTENTS + (6) Screws
x6 x6
8in. x 2.5in. x 2.5in.
Short Posts
4ft. x 3.5in.
Boards
3.5in. x 3.5in.
Decorative Caps
x14
.
CONNECT THREE SHORT POSTS TOGETHER WITH TWO BOARDS
Holding a Board in one hand with the notched ends facing up, line
up the groove on a Short Post and slide it down over one end of the
Board. Slide another Short Post down over the other end. With the
same Short Post, slide the second Board through the groove finishing
with another Short Post at the end to complete one 8ft. wall.
Repeat step one to complete a second wall.
.
CONNECT THE TWO WALLS TOGETHER WITH THREE BOARDS
Take a Board and slide it down over the top of a Short Post. Connect
the same Board to an adjacent Short Post on the second wall. Do
the same with two more Boards completing a 4ft. x 8ft. rectangle.
.
ADD A SECOND BOARD TO ALL WALLS & ATTACH
DECORATIVE CAPS
Add Boards, one at a time, directly on top of each existing Board in
the Frame. Push the Boards down evenly between the tops of the
Short Posts. If needed, tap snugly into place with a rubber mallet.
Attach each Decorative Cap to a Short Post with a screwdriver and
one Screw. We recommend drilling a pilot hole first for each Screw.
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M
–
F 8
–
5
info@greenesfence.com
INSTALL ATION SUPPORT
youtube.com/greenesfence
TO STACK GARDEN BEDS FOR MORE HEIGHT:
• Assemble the first Garden Bed without Decorative Caps, or remove Caps
from a completed Bed.
• The Corner Posts are designed to be taller than the Boards, so Beds can
be stacked securely.
• Slide a Board from the second Garden Bed into tops of the Corner Posts from
the first Bed, to extend one wall upwards.
• Slide Corner Posts from the second Bed down on both ends of the Board to lock in place.
• Continue assembling the second Bed, sliding Boards and Posts into place on top
of the first to complete another rectangle.
• Attach Decorative Caps to the tops of each Corner Post.
  • Page 1 1

Greenes Fence RC48967 Installation guide

Greenes Fence
Brand
Greenes Fence
Model
RC48967
Type
Installation guide

Greenes Fence RC48967 is an original cedar raised garden bed that can be stacked for more height. It is 4ft. wide x 8ft. long x 7in. high, and comes with six screws, six 8in. x 2.5in. x 2.5in. short posts, fourteen 4ft. x 3.5in. boards, and six 3.5in. x 3.5in. decorative caps. The garden bed is easy to assemble, and can be used to grow a variety of plants, including vegetables, herbs, and flowers. It is also a great way to add a touch of style to your backyard or patio.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents