2. Krosswood Doors
  3. PC-WS-B33
PC-WS-B33

Krosswood Doors PC-WS-B33 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Krosswood Doors PC-WS-B33 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly Instructions
2 Door Base with Drawer
Wood
Dowel
Cam-Lock
Screw
Cam-Lock
Nut
¾” Screw
Bumpers
2 Piece
Hinge X 4
Back Panel
1
2
3
4
Tools needed but not provided:
Rubber Mallet
Wood Glue
½” Screw
*Do not put glue directly on the dowel
*Place 2-3 drops of glue in the hole
before inserting each dowel
Shelf Clips
X 4
Insert dowels
after glue drops
Back Panel
Drawer Front
Drawer Back
Drawer Side
X 2
Front Cross
Brace X 2
Back Cross
Brace
4 ½” Toe Kick
Phillips
Screwdriver
Drawer Slides
X 2
Right Panel
*Place 2-3 drops of glue in side
panel holes before attaching Cross
Braces, Toe Kick, Cabinet Bottom
and Back Panel
*Do not Fully tighten ½”
hinge screws until step 8
Left Panel
X 14
Backset 1/8”
Cabinet
Bottom
*If you would like a Left Hinge door: apply hinge base to
Left Panel. Drawing shows Right Hinge
Left
Panel
Right
Panel
*Push all the way in until less
than 3/8” of dowel is exposed
Left Panel
Right Panel
Cabinet Bottom
Shelf
Door X 2
Drawer Bottom
4-1/2” Toe Kick
Front Cross Brace
Front Cross Brace
Back Cross Brace
Cabinet
Bottom
C A B I N E T S
B y M o d e r n C l a s s i c
X 14
*Screw in Cam-Lock Screw until
threads are no longer visible
5
6
8 9
7
Slide Drawer Bottom
in Groves
Back Outside View
Back Inside View
Place a drop of glue in each space
X 14
Tighten all
Cams
X 2
Shelf
Shelf Clip
X 4
10
11
13
12
14
Hook in back of drawer 1st
Set Pin in Predrilled
hole
Drawer Bottom
(Underside View)
Drawer Bottom
(Underside View)
Hinge Adjustment as Needed For Door Alignment
(In/Out)
Side-Side
Up-Down
Front-Back
Drawer Adjustment
Twist wheel for drawer alignment
X 2 Doors
Place 1 Rubber Bumper on
each side of each drawer
X 2
/