Raven Original Scanner Quick start guide

Type
Quick start guide
Quick Start Guide
1
Power on and get connected via Ethernet cable,
or your preferred wireless network.
1.1 Connect to available wireless network,
or connect via ethernet cable.
1.2 Connect to other network, if your network
is not listed to enter manually.
2
Sign in to your Raven account, or sign up for free if you don’t already have an account.
2.1 Sign in to your Raven account, or sign
up for a free account.
2.2 Welcome screen shows scan options,
and access to the settings menu.
3
Scan preview shows scanned pages. You can change the scanned file destination.
3.3 Set up destination connections at
app.Raven.com/connect.
Getting started with Raven Scanner
Version 4
YOUR
SCANNED
DOCUMENT
3.2 You can edit individual pages by
clicking on preview thumbnails.
2.3 Settings allow making changes to the
scanner and network.
3.1 On the scan preview screen, you can
remove or reorder pages, select combined
or single output files.
Download the user manual at raven.com/user-manuals
Our support team is available to answer any questions and take your feedback.
Call us at 1-800-713-9009 or email [email protected]
1.3 If an update is required, choose "Update"
then "Install", "Install Manually" or "OK"
when prompted.
New update
A software update
is required.
UPDATE
Scanner Setup Guide
Getting started with Raven Scanner
1
What’s in the box
2
Install the scanner
3
Connect to the power and internet
Scanner Main Unit Paper Tray
2.2 Pull out the output tray to extend
fully. Raise the paper stopper to
prevent the paper from falling.
3.1 For ethernet connection (optional),
connect one end of your Ethernet LAN
cable to an available port of your
Ethernet Hub. Connect the other end to
to the port at the back of the product.
2.1 Open the panel unit by pulling
the lever, install the paper chute
by aligning and inserting the tabs
of the paper chute into their slots
on the scanner. Snap panel unit
into place.
Power Cables
3.2 Connect one end of the power
cable to the power receptacle of the
product. Connect the other end to
an appropriate power outlet. Turn
the switch to the β€œon” position.
2.3 Extra replacement pad modules
are included for future replacement
needs.
Replacement Pad Module
3.1
3.2
Download the user manual at raven.com/user-manuals
Our support team is available to answer any questions and take your feedback.
Call us at 1-800-713-9009 or email [email protected]
  • Page 1 1
  • Page 2 2

Raven Original Scanner Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI