L.L.Bean Mission Two Drawer Desk Assembly Instructions

Brand: L.L.Bean

Model: Mission Two Drawer Desk

Type: Assembly Instructions

Mission Two Drawer Desk

Thank you for purchasing our Mission Two Drawer Desk. Assembly of this product

requires a Phillips screwdriver and a hammer. We have found it helpful to have a second

person present in at least one step of the assembly.

0GVJ9081008

Read through these instructions thoroughly. We

have found this to be of great value when first

assembling this product.

Remove all parts and hardware from packing

material. Place wooden parts on non-abrasive

surface (like carpet or carton) to prevent damage

to finish.

Assembly of this product requires a Phillips

screwdriver and a hammer.

Identify and count hardware using diagram at

right.

Identify all parts using diagram at right.

1 Top (A)

1 Right Side Assembly (B)

1 Left Side Assembly (E)

1 Bottom Stretcher (C)

2 Drawers (D)

STEP 1

Lay Top (A) on non-abrasive surface (like

cardboard or carpet) to prevent damage to finish.

STEP 2

Attach right Side Assembly (B) to Top (A) using

two 1-1/4” screws inserting them through the

inside of the Top (A) frame then into the

predrilled holes in the Side Assembly (B). Please

note position of holes in Side Assembly (B).

They should be to the back of the unit. Do not

tighten.

STEP 3

Repeat Step 2 to attach left Side Assembly (E).

1 of 3 0GVJ9081008

STEP 4

Attach Bottom Stretcher (C) to Side Assemblies

(B) and (E) using four 2-1/4” screws inserting

them through the holes in the Side Assemblies

(B) and (E) then into the predrilled holes in the

Bottom Stretcher (C). Tighten all screws.

STEP 5

Attach drawer pulls to Drawers (D) using the

screws provided.

STEP 6

Place Drawers (D) inside Top (A). Attach drawer

stops to Drawers (D) inserting four 1” screws

through drawer stop then into the predrilled holes

in the bottom of the Drawers (D).

2 of 3 0GVJ9081008

STEP 7

Turn unit upright. Have a second person help if

needed.

STEP 8

Place flush plugs to cover screw holes on outside

of Side Assemblies (B), tap lightly until flush.

CARE

Dust as needed with soft cloth. Clean with damp

cloth and mild solution of dish soap. Polish with

soft cloth and polish that contains no pigment or

silicone.

www.llbean.com

Product Support 1 800 341 4341

3 of 3 0GVJ9081008

L.L.Bean Mission Two Drawer Desk Assembly Instructions

Brand: L.L.Bean

Model: Mission Two Drawer Desk

Type: Assembly Instructions

Download PDF

report

L.L.Bean Mission Two Drawer Desk Assembly Instructions

L.L.Bean Mission Two Drawer Desk Assembly Instructions

Related papers

Other documents