Mettler Toledo Compact scales BBA422 / BBA425 / BBK422 Operating instructions

Mettler Toledo
Brand
Mettler Toledo
Model
Compact scales BBA422 / BBA425 / BBK422
Category
Kitchen scales
Type
Operating instructions
User manual
METTLER TOLEDO
Compact scales BBA422 / BBA425 / BBK422
www.mt.com/support
Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper
use according to this Operating Manual and regular calibration and maintenance by
our factory-trained service team ensures dependable and accurate operation,
protecting your investment. Contact us about a ServiceXXL agreement tailored to your
needs and budget.
We invite you to register your product at www.mt.com/productregistration
so we can
contact you about enhancements, updates and important notifications concerning
your product.
@@@@@
Table of contentsBBA422 / BBA425 / BBK422
3User manual 22011381B 05/08
Table of contents
Page
1 Introduction .....................................................................................4
1.1 Safety instructions .............................................................................4
1.2 Description ......................................................................................5
1.3 Putting into operation ........................................................................9
1.4 Disposal ........................................................................................10
2 Operation ......................................................................................11
2.1 Switching on and off .......................................................................11
2.2 Zeroing / Zero point correction ..........................................................11
2.3 Simple weighing .............................................................................11
2.4 Weighing with tare ..........................................................................12
2.5 Dynamic weighing ..........................................................................13
2.6 Printing results ...............................................................................14
2.7 Cleaning ........................................................................................14
3 Settings in the menu ......................................................................15
3.1 Operating the menu ........................................................................15
3.2 Overview .......................................................................................17
3.3 Scale settings (SCALE) ....................................................................20
3.4 Application settings (APPLICATION) ..................................................22
3.5 Terminal settings (TERMINAL) ..........................................................23
3.6 Configuring interfaces (COMMUNICATION) .........................................24
3.7 Diagnosis and printing out of the menu settings (DIAGNOS) ................27
4 Interface description ......................................................................28
4.1 SICS interface commands ................................................................28
4.2 TOLEDO Continuous mode ..............................................................30
5 Event and error messages ..............................................................32
6 Technical data and accessories ......................................................34
6.1 Technical data ................................................................................34
6.2 Accessories ....................................................................................39
7 Appendix ......................................................................................40
7.1 Information for certified scales in EC countries ....................................40
7.2 Safety checks .................................................................................40
7.3 Table of Geo Values ........................................................................41
8 Index ............................................................................................44
BBA422 / BBA425 / BBK422
4
Introduction
User manual 22011381B 05/08
1 Introduction
1.1 Safety instructions
DANGER!
Electric shock hazard!
▲ Always pull out the mains plug before any work on the device.
DANGER!
Electric shock hazard if the mains cable is damaged!
▲ Check the mains cable for damage regularly and replace it immediately if it is dam-
aged.
▲ On the rear side of the device, maintain a clearance of at least 3 cm in order to
prevent the mains cable bending too much.
CAUTION!
On no account open the device!
The warranty is void if this stipulation is ignored. The device may only be opened by
authorized persons.
▲ Call METTLER TOLEDO Service.
CAUTION!
Do not use BBA422 / BBA425 / BBK422 in hazardous areas!
Our product range includes special devices for hazardous areas.
CAUTION!
Scales with protection level IP65 are dust-tight and hose-proof to EN 60529. They are
suitable for use in dusty environment and brief contact with liquids. Ensure that the
scale is dried off again after coming into contact with liquid.
Even with degree of protection IP65 the scale should not be used in environments in
which there is a risk of corrosion.
▲ Do not flood the scale or submerge it in liquid.
IntroductionBBA422 / BBA425 / BBK422
5User manual 22011381B 05/08
CAUTION!
Handle the compact scale with care.
The scale is a precision instrument.
▲ When the weighing pan has been removed, never clean the area under the load
plate holder with a solid object!
▲ Do not put excessive loads on the scale.
▲ Avoid banging the weighing pan.
Note Use with foodstuffs
Parts coming into contact with foodstuffs have smooth surfaces and are easy to clean.
The materials used do not splinter and are free of harmful substances.
With foodstuffs, it is recommended to use the supplied protective cover.
➜ Clean the protective cover regularly and carefully.
➜ Replace damaged or very dirty protective cover immediately.
1.2 Description
This user manual applies to the following types of compact scales:
• Compact scale BBA422... with strain gauge weighing cell, Protection Class IP43
• Compact scale BBA425... with strain gauge weighing cell, Protection Class IP65
• Compact scale BBK422... with MonoBloc, Protection Class IP43
The compact scales are available in a small and large size in various capacities and
resolutions.
The power supply is carried out via a built-in power supply device, an internal
rechargeable battery with an external mains adapter or an external battery.
One of the following options can also be ordered:
• Additional interface RS232 or RS485
• Ethernet interface
• USB interface
• Digital I/O
BBA422 / BBA425 / BBK422
6
Introduction
User manual 22011381B 05/08
1.2.1 Overview
1 Display
2 Scale specifications
3 Load plate
4 Adjustable feet
5 Keys
1 Power supply
connection
2 Fast and fine pressure
equalization, only with
Protection Class IP65
3 Optional interface
4 (Standard) RS interface
1
2
3
4
5
431 2
IntroductionBBA422 / BBA425 / BBK422
7User manual 22011381B 05/08
1.2.2 Display
1 Active interface
2 Weighing range display
3 Battery charge level; only present on scales with a battery
4 Symbol for displaying net values
5 Symbol for dynamic weighing
6 Weight units
7 7-segment display, 7 digits, with decimal point
8 Stability monitor (goes out when a stable weight value is reached)
9 Sign
10 Identification for changed or calculated weight values, e.g. higher resolution,
minimum weight not reached
BBA422 / BBA425 / BBK422
8
Introduction
User manual 22011381B 05/08
1.2.3 Keypad
Main functions
Additional functions
Key Function in operating mode Function in the menu
Switching device on / off, abort To the last menu item –End-
Setting scale to zero Scrolling back
Taring scale Scrolling forward
Transfer key
Long key press: Calling up menu
Activating menu item
Accepting selected setting
0
T
Key Function
Switching weight unit
Clear key
Units
Clear
C
IntroductionBBA422 / BBA425 / BBK422
9User manual 22011381B 05/08
1.3 Putting into operation
1.3.1 Selecting or changing the location
The correct location is crucial to the accuracy of the weighing results!
Major geographical
location changes
The manufacturer adjusts each scale to the local gravity conditions (GEO value). In
the event of major geographical location changes, this setting must be adjusted by a
service technician. Certified scales must also be recertified observing the national cer-
tification regulations. These steps are not necessary for scales with an internal cali-
bration weight.
1.3.2 Connecting the power supply
CAUTION!
Before connecting the scale to the mains, check whether the voltage value printed on
the rating plate corresponds with the local mains voltage.
▲ Never connect the device if the voltage value printed on the rating plate is different
to the local mains voltage.
➜ Plug the mains plug into the socket.
After connection, the device performs a self-test. When the zero display appears,
the device is ready to weigh.
➜ Calibrate the device in order to obtain the greatest possible precision, see
Section 3.3.1.
➜ Select a stable, vibration-free and if possible a horizontal location.
The ground must be able to safely bear the weight of the fully loaded scale.
Observe the following environmental conditions:
• No direct sunlight
• No strong drafts
• No excessive temperature fluctuations
Aligning the scale
Only scales that have been aligned precisely horizontally provide accurate weighing
results. The certified scales have a spirit level to simplify alignment.
➜ Turn the adjustable feet of the scale until the spirit level’s air bubble is inside the
inner circle.
BBA422 / BBA425 / BBK422
10
Introduction
User manual 22011381B 05/08
Note Partially certified scales (scales with first-level certification) must be certified by an
authorized body or by the METTLER TOLEDO Service.
➜ Call METTLER TOLEDO Service.
Note The storage battery is also suitable for permanent mains operation.
➜ In order to obtain the full nominal capacity we recommend that you discharge the
storage battery at regular intervals (approx. every 4 weeks) through normal
operation.
1.4 Disposal
In conformance with the European Directive 2002/96 EC on Waste Electrical and
Electronic Equipment (WEEE) this device may not be disposed of with domestic
waste. This also applies to countries outside the EU, per their specific requirements.
➜ Please dispose of this product in accordance with local regulations at the collecting
point specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or the distributor
from which you purchased this device.
Should this device be passed on to other parties (for private or professional use), the
content of this regulation must also be related.
Thank you for your contribution to environmental protection.
If the device is equipped with a storage battery:
The nickel metal hydride (NiMH) storage battery does not contain any heavy metals.
However, it may not be disposed of with the normal refuse.
➜ Observe the local regulations on the disposal of materials that are hazardous to the
environment.
Scales with a built-in battery can work independently from the mains for approxi-
mately 30 hours in normal operation. A prerequisite for this is that the background
lighting is switched off and that no peripheral devices are connected.
The device automatically switches to battery operation as soon as the mains supply
is interrupted. When the mains supply is restored, the device automatically switches
back to mains operation.
The battery symbol indicates the present charging level of the battery. 1 segment cor-
responds to approx. 25 % capacity. When the symbol flashes the battery must be
charged (min. 4 hours). The charging period is extended if work is continued during
charging. The battery is protected against overcharging.
The charging time of the storage battery amounts to approx. 6 hours. If the device
continues to be operated during the charging process, the charging time is extended.
The storage battery has a service life of approx. 1,000 charging/discharging cycles.
OperationBBA422 / BBA425 / BBK422
11User manual 22011381B 05/08
2 Operation
2.1 Switching on and off
Switching on ➜ Press .
The scale conducts a display test. When the weight display appears, the scale is
ready to weigh.
Switching off ➜ Press .
Before the display goes out, -OFF- appears briefly.
2.2 Zeroing / Zero point correction
Zeroing corrects the influence of slight changes on the load plate.
Manual 1. Unload scale.
2. Press .
The zero display appears.
Automatic In the case of scales that cannot be certified, the automatic zero point correction can
be deactivated in the menu or the amount can be changed.
As standard, the zero point of the scale is automatically corrected when the scale is
unloaded.
2.3 Simple weighing
1. Place weighing sample on scale.
2. Wait until the stability monitor goes out.
3. Read weighing result.
BBA422 / BBA425 / BBK422
12
Operation
User manual 22011381B 05/08
2.4 Weighing with tare
2.4.1 Taring
➜ Place the empty container on the scale and press .
The zero display and the symbol NET appear.
The tare weight remains saved until it is cleared.
2.4.2 Clearing the tare
➜ Unload scale and press .
The symbol NET goes out, the zero display appears.
or
➜ Press .
The symbol NET goes out, the gross weight appears in the display.
If A.CL-tr is activated in the menu, the tare weight is automatically cleared as soon
as the scale is unloaded.
2.4.3 Automatic taring
Prerequisite
A-tArE is activated in the menu under SCALE –> tArE, the symbol T flashes in
the display.
The packaging material must be heavier than 9 display steps of the scale.
➜ Place the container or packaging material on the scale.
The packaging weight is automatically saved as the tare weight, the zero display
and the symbol NET appear.
T
T
C
OperationBBA422 / BBA425 / BBK422
13User manual 22011381B 05/08
2.4.4 Chain tare
Prerequisite
The tare function CHAIn.tr is activated in the menu.
With this function it is possible to tare several times if, for example, cardboard is
placed between individual layers in a container.
1. Place the first container or packaging material on the scale and press .
The packaging weight is automatically saved as the tare weight, the zero display
and the symbol NET appear.
2. Weigh the weighing sample and read/print out the result.
3. Place the second container or packaging material on the scale and press
again.
The total weight on the scale is saved as the new tare weight. The zero display
appears.
4. Weigh the weighing sample in the second container and read/print the result.
5. Repeat the last two steps for other containers.
2.5 Dynamic weighing
With the dynamic weighing function, it is possible to weigh restless weighing samples
such as live animals. If this function is activated, the symbol appears in the dis-
play.
With dynamic weighing, the scale calculates the mean value from 56 weighing oper-
ations within 4 seconds.
With manual start Prerequisite
AVErAGE -> MAnuAL is selected in the menu.
The weighing sample must be heavier than 5 scale divisions.
1. Place the weighing sample on the scale and wait until it has stabilized.
2. Press to start dynamic weighing.
During dynamic weighing, horizontal segments appear in the display, and the
dynamic result is then displayed with the symbol *.
3. Unload the scale to be able to start a new dynamic weighing operation.
T
T
BBA422 / BBA425 / BBK422
14
Operation
User manual 22011381B 05/08
With automatic start Prerequisite
AVErAGE -> AUtO is selected in the menu.
The weighing sample must be heavier than 5 scale divisions.
1. Place the weighing sample on the scale.
The scale starts the dynamic weighing automatically.
During dynamic weighing, horizontal segments appear in the display, and the
dynamic result is then displayed with the symbol *.
2. Unload the scale to be able to perform a new dynamic weighing operation.
2.6 Printing results
If a printer or computer is connected to the scale, the weighing results can be printed
out or sent to a computer.
➜ Press .
The display contents are printed out and transferred to the computer.
2.7 Cleaning
CAUTION!
Electric shock hazard!
▲ Before cleaning with a damp cloth, pull out the mains plug to disconnect the unit
from the power supply.
CAUTION!
When the weighing pan has been removed, never clean the area under the load plate
holder with a solid object!
This could damage the weighing cell.
Other cleaning information:
• Use damp cloths.
• Do not use any acids, alkalis or strong solvents.
• Do not clean using a high-pressure cleaning unit or under running water.
• If very dirty, remove the weighing pan, protective cover (if present) and adjustable
feet and clean these items separately.
• Follow all the relevant instructions regarding cleaning intervals and permissible
cleaning agents.
Settings in the menuBBA422 / BBA425 / BBK422
15User manual 22011381B 05/08
3 Settings in the menu
Settings can be changed and functions can be activated in the menu. This enables
adaptation to individual weighing requirements.
The menu consists of 6 main blocks containing various submenus on several levels.
3.1 Operating the menu
3.1.1 Calling up the menu and entering the password
The menu differentiates between 2 operating levels: Operator and Supervisor. The
Supervisor level can be protected by a password. When the device is delivered, both
levels are accessible without a password.
Operator menu 1. Press and keep it pressed until COdE appears.
2. Press again.
The menu item tErMINL appears. Only the submenu dEVICE is accessible.
Supervisor menu 1. Press and keep it pressed until COdE appears.
2. Enter the password and confirm with .
The first menu item SCALE appears.
Note No supervisor password has been defined when the device is first delivered. Therefore
respond to the password inquiry with when you call up the menu for the first time.
If a password has still not been entered after a few seconds, the scale returns to weigh-
ing mode.
Emergency password for Supervisor access to the menu
If a password has been issued for Supervisor access to the menu and you have for-
gotten it, you can still enter the menu:
➜ Press 3 times and confirm with .
BBA422 / BBA425 / BBK422
16
Settings in the menu
User manual 22011381B 05/08
3.1.2 Selecting and setting parameters
Scrolling on one level ➜ Scroll forward: Press .
➜ Scroll back: Press .
Activating menu items/
accepting selection
➜ Press .
Exiting menu 1. Press .
The last menu item END appears.
2. Press .
The inquiry SAVE appears.
3. Confirm inquiry with to save the settings and return to weighing mode.
-or-
➜ Press to discard changes and return to weighing mode.
SCALE
APPLIC
tErMINL COMMUNI
dIAGNOS
End
CAL dISPLAY tArE
T
T T T
T T
T T
T
SLEEP
PWr.OFF b.LIGHt
MOdE
COM 1
...
PriNtEr PArAMEt
T
dEVICE ACCESS
COdE
rESEt
COM 2
...
rSt
.
COMX
T
T
Settings in the menuBBA422 / BBA425 / BBK422
17User manual 22011381B 05/08
3.2 Overview
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Page
SCALE CAL 20
dISPLAY UNIt1
g, kg, oz, lb, t
20
UNIt2 g, kg, oz, lb, t
rESOLU
UNt.rOLL
ON, OFF
tArE A-tArE
ON, OFF
21
ChAIn.tr ON, OFF
A.CL-tr
ON, OFF, 9d
ZErO AZM OFF; 0.5 d; 1 d; 2 d; 5 d; 10 d 21
rEStArt
ON/OFF
21
FILtEr VibrAt
LOW, MEd, HIGH,
21
PrOCESS UNIVEr, dOSING
StAbILI FASt, StAndrd, PrECISE
FACt tEMP
OFF, 1K, 2K, 3K, 5K
22
Min.WEiG ON/OFF
ON, OFF
22
rESEt SUrE? 22
APPLIC AVErAGE OFF, AUtO, MAnuAL 22
rESEt SUrE? 22
tERMINL dEVICE SLEEP OFF, 1 min, 3 min, 5 min, 15 min,
30 min
23
PWr OFF OFF, 1 min, 3 min, 5 min, 15 min,
30 min
b.LIGHt ON, OFF, 5 sec, 10 sec, 30 sec,
1 min
ACCESS SUPErVI 23
rESEt SUrE? 23
BBA422 / BBA425 / BBK422
18
Settings in the menu
User manual 22011381B 05/08
COMMUNI COM 1/COM 2 MOdE Print 24
A.Print
CONtINU
dIALOG
CONt.OLd
dIAL.OLd
dt-b GrOSS ON, OFF
tArE ON, OFF
nEt ON, OFF
dt-G GrOSS ON, OFF
tArE ON, OFF
nEt ON, OFF
COnt-Wt
2nd.dISP
InSt.Prn
PriNtEr Type ASCII, LAbEL 24
tEmPLat StdArd, tEMPLt1,
tEMPLt2
ASCi.Fmt LINE.FMt MULtI
SINGLE
FIXEd
LENGtH 1 ... 100
SEPArAt , ;...
Add LF 0 ... 9
PArAMEt bAUd 300 ... 38400 25
PAritY 7 nonE, 8 nonE, 7 odd,
8 odd, 7 EVEN, 8 EVEN
H.SHAKE NO, XONXOFF, nEt 422,
nEt 485
NEt.Addr 0 ... 31
ChECSuM
ON, OFF
Vcc
ON, OFF
rSt.COMx SUrE? 25
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Page
Settings in the menuBBA422 / BBA425 / BBK422
19User manual 22011381B 05/08
COMMUNI OPtION EtH.NEt IP.AddrS, SUbNEt, GAtEWAY 25
USb USb tESt 25
diGitAL IN 0 ... 3 OFF, ZErO, tArE,
Print, CLEAr, Unit
25
OUT 0 ... 3 OFF, StAbLE, bEL.Min,
AbV.Min, UndErLd,
OVErLd, StAr, ...
SEt.Pt 1
SEt.Pt 2
dEF.PrN tEmPLt1/
tEMPLt2
LINE 1 ...
LINE 8
NOt.USEd, HEAdEr,
GrOSS, tArE, nEt,
StArLN, CrLF, F FEEd
26
dIAGNOS tESt SC intErN/ExtErN 27
KboArd
dISPLAY
SNr
LiSt
rESEt.AL SUrE?
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Page
BBA422 / BBA425 / BBK422
20
Settings in the menu
User manual 22011381B 05/08
3.3 Scale settings (SCALE)
3.3.1 CAL – calibration (adjustment)
This menu item is not available for certified scales without internal calibration weight.
3.3.2 DISPLAY – weighing unit and display accuracy
Internal For scales with an internal calibration weight:
1. Unload scale.
2. Activate menu item CAL with . The scale calibrates with the internal calibra-
tion weight. -Int CAL- appears in the display. After calibration is completed,
-donE- appears briefly in the display, and the scale automatically changes to
the next point of the scale menu.
External For scales without an internal calibration weight:
1. Unload scale.
2. Activate menu item CAL with . The scale determines the zero point.
–0- appears in the display. The calibration weight to be placed on the scale then
flashes in the display.
3. If necessary, change the weight value displayed with .
4. Place the calibration weight on the scale and confirm with .
The scale calibrates with the calibration weight loaded. After calibration is com-
pleted, -donE- appears briefly in the display, and the scale automatically changes
to the next point of the scale menu.
T
UNIt1 Select weighing unit 1: g, kg, oz, lb, t
UNIt2 Select weighing unit 2: g, kg, oz, lb, t
rESOLU Select readability (resolution), model-dependent
UNt.rOLL When UNT.rOLL is switched on, the weight value can be displayed in all available
units with .
Notes
• In the case of certified scales individual sub-items of the dISPLAY menu item
may not be available or only to a limited extent, depending on the respective
country.
• On dual-range/dual interval scales, resolutions marked with |<–>| 1/2 are
divided up into 2 weighing ranges/intervals, e.g. 2 x 3000 d.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46

Mettler Toledo Compact scales BBA422 / BBA425 / BBK422 Operating instructions

Mettler Toledo
Brand
Mettler Toledo
Model
Compact scales BBA422 / BBA425 / BBK422
Category
Kitchen scales
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents