Sennheiser e 912 S BK User manual

Category
Microphones
Type
User manual

This manual is also suitable for

Sennheiser e 912 S BK is a high-quality, pre-polarized condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars, and lecterns.

The e 912 S can be switched on and off via an integrated membrane switch. It has a programmable membrane switch, is very unobtrusive due to its flat design, and has an extremely rugged sound inlet basket. Additionally, it has a rubber damping plate on the base, mounting slots for mounting the microphone to table tops, lecterns, etc., and a gold-plated XLR connector.

Sennheiser e 912 S BK is a high-quality, pre-polarized condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars, and lecterns.

The e 912 S can be switched on and off via an integrated membrane switch. It has a programmable membrane switch, is very unobtrusive due to its flat design, and has an extremely rugged sound inlet basket. Additionally, it has a rubber damping plate on the base, mounting slots for mounting the microphone to table tops, lecterns, etc., and a gold-plated XLR connector.

Mikrofone | evolution
General Description
The e 912 S is a high-quality, pre-polarized condenser microphone with
half-cardioid pick-up pattern, acoustically optimized for picking up speech.
Due to its unobtrusive, flat design, it is ideally suited for use on conference
tables, altars and lecterns. The e 912 S can be switched on and off via an
integrated membrane switch.
Features
J
Programmable membrane switch
J
Very unobtrusive due to flat design
J
Extremely rugged sound inlet basket
J
Rubber damping plate on base
J
Mounting slots for mounting the microphone to table tops, lecterns, etc.
J
Gold-plated XLR connector
J
Integrated electronics (instead of in-line preamp)
J
An internal DIP switch bank provides the following features: on/off
(factory preset), push-to-talk button (PTT), cough button (PTM) or
permanently switched on (ON)
J
The frequency response curve can be changed via a second DIP switch
bank: low cut, low and high boost (factory preset), low boost or linear
(see e 912).
J
The e 912 S has been optimized for picking up speech at relatively short
distances, while the sister model e 916 has been designed for instrument
pick up. For this reason, the frequency response curve of the e 912 S
differs from that of the e 912.
J
With the e 912 S, you can obtain the frequency response curve of the
e 912 by setting the DIP switch to the position lin (linear).
J
Delivery Includes: Microphone e 912 S
Pouch
User guide
Technical Data
Transducer principle .....................................................pre-polarised
condenser microphone
Frequency response .................................................20 – 20 000 Hz
Transducer principle ............................................pressure gradient,
permanently polarized condenser
Pick-up pattern ..............................................................half-cardioid
Sensitivity in free field,
no load (1kHz) .............................................................6 (10) mV/Pa
Depending on adjusted
frequency response curve
Maximum sound pressure level (passiv) ............................ 134 dB
Dimensions ................................................. 126.5 x 105 x 26.5 mm
(4.98“ x 4.13“ x 1.04“)
Weight .....................................................................550 g (19.40 oz)
Variants
J
e 912 S BK, black Cat. No. 500875
J
e 912 S NX, Nextel grey Cat. No. 502193
Cat. No. 500876
Hz
dBV
-20
-30
-40
-50
-60
-70
50 100 200 500 1k 2k 5k 10k 20k
black low und high boost (preset)
red low cut (+ preset)
green linear (e 912)
blue low boost
5
10
15
20
25
dB
30˚
60˚
90˚
30˚
60˚
90˚
120˚
150˚
180˚
150˚
120˚
2000 Hz
4000 Hz
8000 Hz
16000 Hz
125 Hz
250 Hz
500 Hz
1000 Hz
0
e 912 S
  • Page 1 1

Sennheiser e 912 S BK User manual

Category
Microphones
Type
User manual
This manual is also suitable for

Sennheiser e 912 S BK is a high-quality, pre-polarized condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars, and lecterns.

The e 912 S can be switched on and off via an integrated membrane switch. It has a programmable membrane switch, is very unobtrusive due to its flat design, and has an extremely rugged sound inlet basket. Additionally, it has a rubber damping plate on the base, mounting slots for mounting the microphone to table tops, lecterns, etc., and a gold-plated XLR connector.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI