Sennheiser 502193, 500875, 500876, e 912 S BK, e 912 S NX User manual

  • Hello! I am an AI chatbot trained to assist you with the Sennheiser 502193 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Mikrofone | evolution
General Description
The e 912 S is a high-quality, pre-polarized condenser microphone with
half-cardioid pick-up pattern, acoustically optimized for picking up speech.
Due to its unobtrusive, flat design, it is ideally suited for use on conference
tables, altars and lecterns. The e 912 S can be switched on and off via an
integrated membrane switch.
Features
J
Programmable membrane switch
J
Very unobtrusive due to flat design
J
Extremely rugged sound inlet basket
J
Rubber damping plate on base
J
Mounting slots for mounting the microphone to table tops, lecterns, etc.
J
Gold-plated XLR connector
J
Integrated electronics (instead of in-line preamp)
J
An internal DIP switch bank provides the following features: on/off
(factory preset), push-to-talk button (PTT), cough button (PTM) or
permanently switched on (ON)
J
The frequency response curve can be changed via a second DIP switch
bank: low cut, low and high boost (factory preset), low boost or linear
(see e 912).
J
The e 912 S has been optimized for picking up speech at relatively short
distances, while the sister model e 916 has been designed for instrument
pick up. For this reason, the frequency response curve of the e 912 S
differs from that of the e 912.
J
With the e 912 S, you can obtain the frequency response curve of the
e 912 by setting the DIP switch to the position lin (linear).
J
Delivery Includes: Microphone e 912 S
Pouch
User guide
Technical Data
Transducer principle .....................................................pre-polarised
condenser microphone
Frequency response .................................................20 – 20 000 Hz
Transducer principle ............................................pressure gradient,
permanently polarized condenser
Pick-up pattern ..............................................................half-cardioid
Sensitivity in free field,
no load (1kHz) .............................................................6 (10) mV/Pa
Depending on adjusted
frequency response curve
Maximum sound pressure level (passiv) ............................ 134 dB
Dimensions ................................................. 126.5 x 105 x 26.5 mm
(4.98“ x 4.13“ x 1.04“)
Weight .....................................................................550 g (19.40 oz)
Variants
J
e 912 S BK, black Cat. No. 500875
J
e 912 S NX, Nextel grey Cat. No. 502193
Cat. No. 500876
Hz
dBV
-20
-30
-40
-50
-60
-70
50 100 200 500 1k 2k 5k 10k 20k
black low und high boost (preset)
red low cut (+ preset)
green linear (e 912)
blue low boost
5
10
15
20
25
dB
30˚
60˚
90˚
30˚
60˚
90˚
120˚
150˚
180˚
150˚
120˚
2000 Hz
4000 Hz
8000 Hz
16000 Hz
125 Hz
250 Hz
500 Hz
1000 Hz
0
e 912 S
/