Beta 1461/C9B Operating instructions

Beta
Brand
Beta
Model
1461/C9B
Category
Coffee making accessories
Type
Operating instructions

Beta 1461/C9B

Below you will find brief product information for Beta 1461/C9B:

The Beta 1461/C9B is a timing kit for OPEL 1.0 12v. - 1.0 16v. - 1.2 16 v. -1.4 16 v. engines. It includes tools for adjusting the camshaft positioning sensor disc, locking the driving shaft, and locking the chain tensioner.

This kit is designed to help you accurately set the timing of your engine, which is essential for optimal performance and fuel efficiency.

The kit comes with a detailed instruction manual that provides step-by-step guidance on how to use the tools to set the timing correctly.

Beta 1461/C9B

Below you will find brief product information for Beta 1461/C9B:

The Beta 1461/C9B is a timing kit for OPEL 1.0 12v. - 1.0 16v. - 1.2 16 v. -1.4 16 v. engines. It includes tools for adjusting the camshaft positioning sensor disc, locking the driving shaft, and locking the chain tensioner.

This kit is designed to help you accurately set the timing of your engine, which is essential for optimal performance and fuel efficiency.

The kit comes with a detailed instruction manual that provides step-by-step guidance on how to use the tools to set the timing correctly.

P
PL
1461/C9B
NL
D
INSTRUCCIONES
GEBRUIKSAANWIJZING
E
HU
HASZNÁLATI ÚTMUTATÓ
I
EN
F
ISTRUZIONI PER L’USO
INSTRUCTIONS FOR USE
MODE D’EMPLOI
GEBRAUCHSANWEISUNG
INSTRUÇÕES DE USO
INSTRUKCJA OBSŁUGI
Page is loading ...
Page is loading ...
4
INSTRUCTIONS FOR USE
EN
TIMING KIT FOR OPEL 1.0 12V. - 1.0 16V. - 1.2 16 V. - 1.4 16 V.
COMPONENTS
Beta item number OEM item number Description
F196/2
KM-954
Camshaft positioning sensor disc adjustment tool + hexagonal-head
screw 6x20 DIN 5739
F196/1
KM-953
Camshaft positioning sensor disc adjustment tool + hexagonal-head
screw 6x20 DIN 5739
F196/3
KM-952 Driving shaft locking pin
VN069 + VN064
KM-955
Chain tensioner locking pin
Chain tensioner locking pin
APPLICATION
Brand Model Engine Engine code
Ford
Corsa, Agila, Astra,
Meriva
1.0 12v., 1.0 16v., 1.2
16v., 1.4 16v. (catena)
X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z14XEP, Z12XEP,
Z14XEL
Suzuki Wagon R+
Engine code
OEM code
KM-954 KM-953 KM-952 KM-955
X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z14XEP,
Z12XEP, Z14XEL
● ● ● ●
Safety Precautions - Please read
• Disconnect the battery earth leads (check radio code is available)
• Remove spark or glow plugs to make the engine turn easier
• Do not use cleaning uids on belts, sprockets or rollers
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain has been removed (unless
specically stated)
• Do not use the timing chain to lock the engine when slackening or tightening crankshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been removed
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand and to re-check the camshaft and crankshaft
timing positions.
• Crankshafts and Camshafts may only be turned with the chain drive mechanism fully installed.
• Do not turn crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the vehicle manufacturer’s service manual or a suitable proprietary instruction book
• Incorrect or out of phase engine timing can result in damage to the valves
• It is always recommended to turn the engine slowly, by hand, and to re-check the camshaft and crankshaft
timing positions
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
BETA UTENSILI S.p.A.
via Alessandro Volta, 18 - 20845 Sovico (MB) ITALY
Tel. +39 039.2077.1 - Fax +39 039.2010742
www.beta-tools.com - [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Beta 1461/C9B Operating instructions

Beta
Brand
Beta
Model
1461/C9B
Category
Coffee making accessories
Type
Operating instructions

Beta 1461/C9B

Below you will find brief product information for Beta 1461/C9B:

The Beta 1461/C9B is a timing kit for OPEL 1.0 12v. - 1.0 16v. - 1.2 16 v. -1.4 16 v. engines. It includes tools for adjusting the camshaft positioning sensor disc, locking the driving shaft, and locking the chain tensioner.

This kit is designed to help you accurately set the timing of your engine, which is essential for optimal performance and fuel efficiency.

The kit comes with a detailed instruction manual that provides step-by-step guidance on how to use the tools to set the timing correctly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents