LG HT806TGW Owner's manual

P/NO : MFL67204920

HT806TGW (HT806TGW, SH86TG-S/ C, SH95TA-W, W86)

Please read this manual carefully before operating

your set and retain it for future reference.

OWNER’S MANUAL

Wireless DVD Home

Theater System

HT806TGW-F0_BAUSLL_ENG_4920.indd 1 2011-04-19 �� 1:25:26

Getting Started

Getting Started2

Getting Started

1

Safety Informaion

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage

within the product’s enclosure that

may be of sucient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance,

contact an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try

to open the enclosure. Visible laser radiation when

open. DO NOT STARE INTO BEAM.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

center. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

HT806TGW-F0_BAUSLL_ENG_4920.indd 2 2011-04-19 �� 1:25:26

Getting Started 3

Getting Started

1

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

y

The appliance is not intended for use by young

children or inrm persons without supervision.

y

Young Children should be supervised to

ensure that they do not play with appliance.

y

If the appliance is supplied from a cord

extension set or an electrical portable outlet

device, the cord extension set on electrical

portable outlet device must be positioned so

that it is not subject to splashing or ingress of

moisture.

HT806TGW-F0_BAUSLL_ENG_4920.indd 3 2011-04-19 �� 1:25:26

Getting Started4

Getting Started

1

Copyrights

It is forbidden by law to copy, broadcast, show,

broadcast via cable, play in public, or rent

copyrighted material without permission. This

product features the copy protection function

developed by Macrovision. Copy protection signals

are recorded on some discs. When recording and

playing the pictures of these discs picture noise

will appear. This product incorporates copyright

protection technology that is protected by U.S.

patents and other intellectual property rights. Use

of this copyright protection technology must be

authorized by Macrovision, and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE

ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN

CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE USER

SWITCH THE CONNECTION TO THE ‘STANDARD

DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS

REGARDING OUR TV SET COMPATIBILITY WITH THIS

MODEL 525p AND 625p UNIT, PLEASE CONTACT

OUR CUSTOMER SERVICE CENTER.

You have to set the disc format option to [Mastered]

in order to make the discs compatible with the LG

players when formatting rewritable discs. When

setting the option to Live File System, you cannot

use it on LG players.

(Mastered/ Live File System : Disc format system for

Windows Vista)

HT806TGW-F0_BAUSLL_ENG_4920.indd 4 2011-04-19 �� 1:25:26

Getting Started 5

Getting Started

1

HT806TGW-F0_BAUSLL_ENG_4920.indd 5 2011-04-19 �� 1:25:26

Table of Contents6

Table of Contents

Getting Started

2 Safety Informaion

8 Unique Features

8 – Portable In

8 – USB Direct Recording

8 – Full HD up-scaling

8 – Home Theater Speaker ez Setup

8 Accessories

9 Introduction

9 – Playable Discs

9 – About the “&” Symbol Display

9 – Symbols Used in this Manual

9 – Regional Codes

10 Playable ﬁle Requirement

11 Remote control

12 Front panel

13 Rear panel

Connecting

14 Assembling the speaker stand to the

speaker

15 Attaching the speakers to the unit

16 – Wireless speakers connection

18 Positioning the system

19 Connections to Your TV

19 – Component Video Connection

20 – HDMI Out Connection

21 – Video Connection

22 – Resolution Setting

22 Video Output Resolution

23 Optional Equipment Connection

23 – AUX In Connection

23 – AUDIO (PORT. IN) In Connection

23 – Listening to music from your portable

player or external device

24 – USB Connection

25 – OPTICAL In connection

25 – Home theater speaker ez setup

25 Antenna Connection

System Setting

26 Adjust the setup settings

26 – OSD Initial language settings -

Optional

26 – To display and exit the Setup menu

27 – Language

27 – Display

28 – Audio

29 – Lock (Parental Control)

30 – Others

Operating

31 Using the Home Menu

31 Basic Operations

32 Other Operations

32 – Displaying Disc Information on-screen

33 – To display the DVD Menu

33 – To display the DVD title

33 – 1.5 times speed playback

33 – Screen Saver

33 – Starting play from selected time

33 – Resume playback

33 – Changing subtitle code page

34 – Marked Playback

35 – Viewing a PHOTO ﬁle

36 – Sleep Timer Setting

36 – Dimmer

36 – Turn off the sound temporarily

36 – Last Scene Memory

36 – System Select - Optional

36 – Adjust the speaker level settings

37 Radio Operations

37 – Listening to the radio

37 – Presetting the Radio Stations

37 – Deleting all the saved stations

37 – Deleting a saved station

37 – Improving poor FM reception

38 Sound adjustment

38 – Setting the surround mode

39 Advanced Operations

39 – Recording to USB

HT806TGW-F0_BAUSLL_ENG_4920.indd 6 2011-04-19 �� 1:25:26

Table of Contents 7

1

2

3

4

5

6

7

8

Troubleshooting

40 Troubleshooting

Appendix

41 Maintenance

41 – Handling the Unit

41 – Notes on Discs

42 Area Code List

43 Language code List

44 Trademarks and Licenses

45 Speciﬁcations

HT806TGW-F0_BAUSLL_ENG_4920.indd 7 2011-04-19 �� 1:25:26

Getting Started8

Getting Started

1

Unique Features

Portable In

Listens to music from your portable device. (MP3,

Notebook, etc)

USB Direct Recording

Records music from CD to your USB device.

Full HD up-scaling

Views Full HD picture quality with simple setup.

Home Theater Speaker ez

Setup

listens sound from TV, DVD and Digital device with

vivid 5.1 (2.1 or 2.0) ch mode.

Accessories

Please check and identify the supplied accessories.

Remote control (1) Battery (1)

FM antenna (1) Video cable (1)

Speaker cables (6)

HT806TGW-F0_BAUSLL_ENG_4920.indd 8 2011-04-19 �� 1:25:27

Getting Started 9

Getting Started

1

Introduction

Playable Discs

This unit plays DVD±R/RW and CD-R/RW that

contains audio titles, DivX, MP3, WMA and/or

JPEG les. Some DVD±RW/DVD±R or CD-RW/

CD-R cannot be played on this unit due to the

recording quality or physical condition of the disc,

or the characteristics of the recording device and

authoring software.

DVD-VIDEO (8 cm / 12 cm disc)

Discs such as movies that can be

purchased or rented.

DVD±R (8 cm / 12 cm disc)

Video mode and nalized only.

DVD-RW (8 cm / 12 cm disc)

Video mode and nalized only.

DVD+R: Video mode only

Supports the double layer disc also.

DVD+RW (8 cm / 12 cm disc)

Video mode and nalized only.

Audio CD: Music CDs or CD-R/CD-

RW in music CD format that can be

purchased.

About the “

&

” Symbol

Display

“

&

” may appear on your TV display during

operation and indicates that the function explained

in this owner’s manual is not available on that

specic media.

Symbols Used in this Manual

r

DVD-Video, DVD±R/RW in Video

mode or VR mode and nalized

t

Audio CDs

y

Video les contained in the

USB/Disc

u

Audio les contained in the

USB/Disc

i

Photo les

,

Note

Indicates special notes and operating features.

,

Tip

Indicates tip and hints for making the task easier.

>

Caution

Indicates cautions for preventing possible damages

from abuse.

Regional Codes

This unit has a regional code printed on the rear of

the unit. This unit can play only DVD discs labeled

same as the rear of the unit or “ALL”.

y

Most DVD discs have a globe with one or more

numbers in it clearly visible on the cover. This

number must match your unit’s regional code or

the disc cannot play.

y

If you try to play a DVD with a dierent regional

code from your unit, the message “Check

Regional Code” appears on the TV screen.

HT806TGW-F0_BAUSLL_ENG_4920.indd 9 2011-04-19 �� 1:25:27

Getting Started10

Getting Started

1

Playable ﬁle

Requirement

MP3/ WMA music ﬁle requirement

MP3/ WMA le compatibility with this unit is limited

as follows :

y

Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y

Bit rate : within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

y

Support Version : v2, v7, v8, v9

y

Maximum les : Under 999

y

File extensions : “.mp3”/ “.wma”

y

CD-ROM le format : ISO9660/ JOLIET

y

We recommend that you use Easy-CD Creator,

which creates an ISO 9660 le system.

Photo ﬁle requirement

Photo le compatibility with this unit is limited as

follows :

y

Max pixel in width : 2 760 x 2 048 pixel

y

Maximum les : Under 999

y

Some discs may not operate due to a dierent

recording format or the condition of disc.

y

File extensions: “.jpg”

y

CD-ROM le format : ISO9660/ JOLIET

DivX ﬁle requirement

DivX le compatibility with this unit is limited as

follows:

y

Available resolution: within 720 x 576 (W x H)

pixels.

y

The le name of the DivX subtitle should be

entered within 45 characters.

y

If there is impossible code to express in the

DivX le, it may be displayed as “ _ “ mark on the

display.

y

Frame rate : less than 30 fps.

y

If the video and audio structure of recorded

les is not interleaved, either video or audio is

outputted.

y

Playable DivX le : “.avi”, “.mpg”, “.mpeg”, “.divx”

y

Playable Subtitle format : SubRip (*.srt/ *.txt),

SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),

MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/

*.txt), Vobsub (*.sub)

y

Playable Codec format : “DIVX3.xx”, “DIVX4.xx”,

“DIVX5.xx”, “MP4V3”, “3IVX”.

y

Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.

y

Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y

Bit rate : within 32 to 320 kbps (MP3), 40 to 192

kbps (WMA)

y

For Discs formatted in Live le system, you can

not it on this unit.

y

If the name of movie le is dierent from that of

the subtitle le, during playback of a DivX le,

subtitle may not be display.

y

If you play a DivX le dier from DivXspec, it may

not operate normally.

HT806TGW-F0_BAUSLL_ENG_4920.indd 10 2011-04-19 �� 1:25:28

Getting Started 11

Getting Started

1

Remote control

Battery Installation

Remove the battery cover on the

rear of the Remote Control, and

insert one (size AAA) battery with

4

and

5

matched correctly.

• • • • • •

a

• • • • •

P

RADIO&INPUT: Changes

input sources.

MARKER: Marks play list.

1

POWER: Switches the unit ON

or OFF.

B

OPEN/CLOSE: Opens and

closes the disc Drawer.

SLEEP: Sets the System to turn o

automatically at a specied time.

(Dimmer : The display window will

be darken by half.)

m

INFO/DISPLAY: Accesses On-

Screen Display.

n

HOME: Displays the [Home

Menu].

DISC MENU: Accesses the menu

on a DVD disc.

• • • • • •

b

• • • • •

W/S/A/D

(up/ down/ left/

right): Used to navigate on-screen

displays.

PRESET +/-: Selects programme

of Radio.

TUNING +/-: Tunes in the desired

radio station.

b

ENTER: Acknowledges menu

selection.

Presetting the radio stations.

x

RETURN: Moves backwards

in the menu or exits the setup

menu.

TITLE: If the current DVD title has

a menu, the title menu appears

on the screen. Otherwise, the disc

menu may not appear.

• • • • • •

c

• • • • •

Z

STOP: Stops playback.

d

PLAY, MONO/STEREO: Starts

playback. Selects Mono/ Stereo.

M

PAUSE/STEP: Pauses playback.

C/V

SKIP: Goes to the next

or previous chapter / track / le.

c/v

SCAN: Searches

backward or forward.

• • • • • •

d

• • • • •

SPEAKER LEVEL: Sets the sound

level of desired speaker.

SOUND EFFECT: Selects a sound

eect mode.

VOL -/+ (Volume): Adjusts

speaker volume.

OPTICAL: Changes input source

to optical directly.

MUTE: Mutes the sound.

• • • • • •

e

• • • • •

0-9 numerical buttons: Selects

numbered options in a menu.

h

REPEAT: Selects a play

mode. (Repeat/ Random)

CLEAR: Removes a number when

setting the password.

• • • • • •

f

• • • • •

TV Control buttons: Controls the

TV. (LG TV only)

-

You can control the sound

level, input source, and power

switching of LG TVs as well.

Hold POWER (TV) and press PR/

CH (

W/S

) button repeatedly

until the TV turns on or o.

X

REC: USB Direct Recording.

?

: This button is not available.

HT806TGW-F0_BAUSLL_ENG_4920.indd 11 2011-04-19 �� 1:25:28

Getting Started12

Getting Started

1

Front panel

a b c d e f

k j i h g

a

1/!

(POWER)

Switches the unit ON or OFF.

b

R

(OPEN/CLOSE)

Opens or closes the disc tray.

c

T

(PLAY/PAUSE)

Starts playback.

Pauses playback temporarily, press again to exit

pause mode.

d

I

STOP

Stops playback.

e

Y/U

(SKIP)

Goes to next or previous le/track/chapter.

Searches backward or forward (Press and hold)

Tunes in the desired radio station.

f

FUNC. (FUNCTION)

Changes the input source or function.

g

VOLUME

Adjusts speaker volume.

h

Display window

Shows the current status of the unit.

i

Disc Tray

j

USB Port

Connects a USB device.

k

PORT. IN

Connects to a portable player with audio

outputs.

HT806TGW-F0_BAUSLL_ENG_4920.indd 12 2011-04-19 �� 1:25:28

Getting Started 13

Getting Started

1

a

Power cord

b

Speakers connectors

Connects the speaker cables.

c

Cooling Fan

d

Antenna Connector

FM- Connects the FM wired antenna

e

VIDEO OUT

Connects to a TV with video inputs.

f

HDMI OUT

Connects to TV with HDMI inputs.

(Interface for digital audio and video)

g

OPTICAL IN

Connects to optical audio equipment.

h

COMPONENT VIDEO (Y P

B

P

R

)OUTPUT

(PROGRESSIVE SCAN)

Connects to a TV with Y P

B

P

R

inputs.

i

AUX (L/R) INPUT

Connects to an external source with 2 channel

audio outputs.

Rear panel

a b c d e

i h g f

HT806TGW-F0_BAUSLL_ENG_4920.indd 13 2011-04-19 �� 1:25:28

Connecting

14

Connecting

2

Connecting

Assembling the

speaker stand to the

speaker

Before connecting the speakers, assemble the

speakers. Please check the items for assembling the

speakers.

Pakage contents

Speaker

Stand

Attach the speakers to the speaker stands by

rotateing the screws.

HT806TGW-F0_BAUSLL_ENG_4920.indd 14 2011-04-19 �� 1:25:28

Connecting 15

Connecting

2

Attaching the speakers

to the unit

1. Connect the wires to the unit.

Match each wire’s colored band to the same

colored connection terminal on the rear of the

unit. To connect the cable to the unit, press

each plastic nger pad to open the connection

terminal. Insert the wire and release the nger

pad.

Connect the black stripe of each wire to the

terminals marked -(minus) and the other end

to the terminals marked + (plus).

2. Connect the wires to the speakers.

Connect the other end of each wire to the

correct speaker according to the color coding:

Color Speaker Position

Green Center Center

Orange Sub woofer Any front position

Red Front Front right

White Front Front left

To connect the cable to the speakers, press each

plastic nger pad to open the connection terminals

on the base of each speaker. Insert the wire and

release the nger pad.

y

Be careful to make sure children do not put

their hands or any objects into the *speaker

duct.

*Speaker duct : A hole for plentiful bass

sound on speaker cabinet (enclosure).

y

The speakers contain magnet parts, so color

irregularity may occur on the TV screen or

PC monitor screen. Please use the speakers

far away from either TV screen or PC

monitor.

>

Caution

HT806TGW-F0_BAUSLL_ENG_4920.indd 15 2011-04-19 �� 1:25:28

Connecting16

Connecting

2

Wireless speakers connection

LED indicator of wireless receiver

LED Color Operation

Blue The wireless receiver is receiv-

ing the signal of the wireless

transmitter.

Red The Wireless Receiver is in

standby mode.

O (No

display)

The Wireless Receiver is turned

o.

Initial setting an ID of wireless

receiver

1. Connect the Wireless Receiver and the rear

speaker (right, left) with the speaker cables.

2. Connect the power cord of the Wireless

Receiver to the outlet.

3. Turn on the main unit and Wireless Receiver:

The main unit and wireless receiver will be

automatically connected.

Setting an ID of wireless receiver

When the unit is manufactured, the ID is already set.

If an interference occurs or you use a new wireless

receiver, an ID should be set again.

1. Press

n

HOME.

2. Use

AD

to select the [Setup] and press

b

ENTER. The [Setup] menu appears.

3. Use

WS

to select [AUDIO] option then press i

to move to the second level.

4. Use

WS

to select the [Connecting Speakers]

option then press

b

ENTER to move to the

third level.

The [Wireless Speaker Connection Guide]

appears.

5. Press PAIRING button on the wireless receiver.

- If you see the blue LED indicator light, pairing

was successful.

6. Use

WS

to select the [5.1 Speaker Setup] and

press

b

ENTER for wireless speaker connection

test.

HT806TGW-F0_BAUSLL_ENG_4920.indd 16 2011-04-19 �� 1:25:28

Connecting 17

Connecting

2

About Ferrite Core (for EMI only)

Be sure to attach the ferrite core to the speaker

cable (for connecting to this unit and wireless

receiver). This ferrite core can reduce noises.

How to attach the ferrite core

1. Press the stopper [a] of the ferrite core to open.

2. Wind the speaker cables once on the ferrite

core.

3. Close the ferrite core until it clicks.

Refer to the g.3 and comment.

1

2

3

(g. 3)

Rear of wierless receiver

The length

here is as short

as possible.

y

If there is a strong electromagnetic wave

product nearby, interference may occur.

Put the unit (Wireless Receiver and main

unit) away from there.

y

If there is no audio signal for longer than

10 minutes, the Wireless Receiver will

automatically switch to standby mode. In

power saving mode, both LEDs will turn

red. LEDs will turn blue when there is any

audio signal back.

y

If you operate main unit then wireless

speakers (rear speakers) sound within a few

seconds in standby mode.

y

Set the distance between this unit and

Wireless Receiver within 10 m (32 ft.).

y

Optimum performance can be

implemented only when the Wireless

Transmitter and the Wireless Receiver

within distance of 2 m (6 ft.) to 10 m (32 ft.)

is used since communication failure may

occur if longer distance is used.

y

Be sure to match the speaker cable to the

appropriate terminal on the components:

+ to + and – to –. If the cables are reversed,

the sound will be distorted and will lack

bass.

y

It takes a few seconds (and may take

longer) for the Wireless Transmitter and

Wireless Receiver to communicate with

each other.

y

Use the rear speaker at least 30 cm (11 inch)

away from either TV screen or PC monitor.

,

Note

HT806TGW-F0_BAUSLL_ENG_4920.indd 17 2011-04-19 �� 1:25:29

Connecting18

Connecting

2

Positioning the system

The following illustration shows an example of

positioning the system. Note that the illustrations

in these instructions dier from the actual unit for

explanation purposes.

For the best possible surround sound, all the

speakers other than the subwoofer should be

placed at the same distance from the listening

position ( ).

A

B

D

E

F

A

G

C

A

B

A

Front left speaker (L)/ Front right speaker (R):

Place the front speakers to the sides of the

monitor or screen and as ush with the screen

surface as possible.

Center speaker: Place the center speaker above

or below the monitor or screen.

Surround left speaker (L)/ Surround right

speaker (R):

Place these speakers behind your listening

position, facing slightly inwards.

Subwoofer: The position of the subwoofer is

not so critical, because low bass sounds are not

highly directional. But it is better to place the

subwoofer near the front speakers. Turn it slightly

toward the center of the room to reduce the wall

reections.

Unit

HT806TGW-F0_BAUSLL_ENG_4920.indd 18 2011-04-19 �� 1:25:30

Connecting 19

Connecting

2

Connections to Your

TV

Make one of the following connections, depending

on the capabilities of your existing equipment.

y

Depending on your TV and other

equipment you wish to connect, there are

various ways you could connect the player.

Use only one of the connections described

in this manual.

y

Please refer to the manuals of your TV,

Stereo System or other devices as necessary

to make the best connections.

,

Note

y

Make sure the unit is connected directly

to the TV. Tune the TV to the correct video

input channel

y

Do not connect your player via your VCR.

The image could be distorted by the copy

protection system.

>

Caution

Component Video Connection

Connect the COMPONENT VIDEO OUTPUT

(PROGRESSIVE SCAN) jacks on the unit to the

corresponding input jacks on the TV using

component cables.

You can hear the sound through the system’s

speakers.

Unit

TV

Green

Blue

Red

HT806TGW-F0_BAUSLL_ENG_4920.indd 19 2011-04-19 �� 1:25:30

Connecting20

Connecting

2

HDMI Out Connection

If you have a HDMI TV or monitor, you can connect

it to this unit using a HDMI cable (Type A, High

Speed HDMI™ Cable).

Connect the HDMI OUT jack on the unit to the

HDMI IN jack on a HDMI compatible TV or monitor.

Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

Unit

TV

y

You can fully enjoy digital audio and video

signals together with this HDMI connection.

y

When you use HDMI connection, you can

change the resolution for the HDMI output.

(Refer to “Resolution Setting” on page 22.)

,

Tip

y

If a connected HDMI device does not accept

the audio output of the unit, the HDMI

device’s audio sound may be distorted or

may not output.

y

When you connect a HDMI or DVI

compatible device make sure of the

following:

- Try switching o the HDMI/DVI device and

this unit. Next, switch on the HDMI/DVI

device and leave it for around 30 seconds,

then switch on this unit.

- The connected device’s video input is set

correctly for this unit.

- The connected device is compatible with

720 x 480i (or 576i), 720 x 480p (or 576p), 1

280 x 720p, 1 920 x 1 080i or 1 920 x 1 080p

video input.

y

Not all HDCP-compatible HDMI or DVI

devices will work with this unit.

- The picture will not be displayed properly

with non-HDCP device.

- This unit does not playback and TV screen

is changed to black or green screen or the

snow noise may occur on the screen.

y

If there is noise or lines on the screen, please

check the HDMI cable and usea higher

version cable than High Speed HDMI™

Cable.

,

Note

y

Changing the resolution when the

connection has already been established

may result in malfunctions. To solve the

problem, turn o the unit and then turn it

on again.

y

When the HDMI connection with HDCP is

not veried, TV screen is changed to black

or green screen or the snow noise may

occur on the screen. In this case, check the

the HDMI connection, or disconnect the

HDMI cable.

>

Caution

HT806TGW-F0_BAUSLL_ENG_4920.indd 20 2011-04-19 �� 1:25:31

Page is loading ...

LG HT806TGW Owner's manual

LG HT806TGW Owner's manual

Related papers

Other documents