Identification:
Technical Bulletin:
Date:
Issuer:
Factory:
D02
CGX2008-02 (page 1 of 3), 2
nd
ed.
20 February 2008
R. Sartor (DWS Customer Support)
CGX – Dishwashing – Pordenone (I)
Subject
Control Panels in UC double-skin
Model
Undercounter double-skin range (LS6E / WT30E), all brands, Franstal
excluded
Reason
Introduction of more visible brand in all models and “Wash Safe Control” in
Electrolux standard models
From serial number 80700001 we have introduced new control panels (with
wider embossment), new wider membranes and new frontal panels (without
metal badge) as follow:
Action in
Factory
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380636
++39 0434 385646
Share more of our thinking at www.electrolux.com
Technical Bulletin (Control Panel).doc
Brand Description Model
OLD
Spare part
code
NEW
Spare part code
All WT30E
(WT38TDE excluded.
See below)
0L0779
0L1658
Control
panel
WT38TDE
With door lock
0L1401
0L1659
Standard
0L1650
with Wash Safe
Control logo
Marine with
pressure boiler
0L0032
0L1697
without Wash Safe
Control logo
Medical line
0L0281
0L1652
Wine-lie
0L1273
0L1651
Electrolux
Membrane
Café-line
0L0681
0L1657
All LS6E
(LS6SANA excluded.
See below)
0L0780
0L1658
Control
panel
LS6SANA
With door lock
0L1456
0L1659
Standard
049920
LS6SANA
0L1251
0L1653
with Active logo
Zanussi
Membrane
Pressure boiler
(no Active)
0L0515
0L1656
without Active logo
Control
panel
0L0781
0L1658
Alpeninox
Membrane
All FL6
049919
0L1654
Control
panel
0L0781
0L1658
Ecotemp
Membrane
All ET5
049922
0L1655
Without water
softener
0L1312
0L1313
All
brands
Frontal
panel
With water
softener built-in
0L0743
n.a. yet
(p. code 503615000)
Action in
Field
“New” membranes are not interchangeable towards “old” ones unless
replacement also of control panel.
Share more of our thinking at www.electrolux.com
2
The “WASH SAFE CONTROL” for Electrolux models works like the “ACTIVE”
system for Zanussi models:
• Green led = correct rinse temperature
• Red led = low rinse temperature
While the rinse pump guarantees the correct rinse pressure.
Of course this means the main board in standard Electrolux models must be
set like the main board in Zanussi models with Active system (atmospheric
boiler), i.e. with the parameter User Interface model UI = 9 instead of UI = 8
(see CFG parameters).
How standard Electrolux models and standard Zanussi models look like from
serial number 80700001:
Share more of our thinking at www.electrolux.com
3
/