AKASO Focus Quick Reference Manual

Brand: AKASO

Model: Focus

Category: Projectors

Type: Quick Reference Manual

Please read this manual before operating your fucus mini video projector,

and keep it for further reference.

QUICK

REFERENCE

GUIDE

FOCUS Mini Video Projector

Projector Buttons & Functions

Infrared Remote Control

Power ON / OFF

Power Bank Mode and Charging Method

EZWire: Screen-sharing via Wire Connection

EZCast: Screen-sharing via Wireless Connection

HDMI Input

Media Library

Settings Description

Security

User Manual

CONTENTS

PROJECTOR BUTTONS & FUNCTIONS INFRARED REMOTE CONTROL

POWER ON / OFF

2 3

NOTE:

When in the EZWire / EZCast / HDMI interface, the button function is changed.

Forward: Change to volume +

Backward: Change to volume -

1. Focusing Wheel 2. Return

3. Forward 4. Backward

5. OK 6. Projection Mode

7. Power Button 8. Power Bank Mode

9. DC 10. USB

11. HDMI 12. Earphone

13. Micro SD Card Port

MUTE

RETURN

SETTINGS

VOL+/-

DIRECTIONS

HOME

NOTE:

When using the IR remote control, you should aim at the projector rather than

screen.

1Pull the power button to the left and hold it for about four seconds until the green

indicator on the projector bottom is lit up, then the projector starts to work.

2Turn the power button to the left again and hold it for about two seconds to shut

down the projector.

3Turn the power button to the right to lock the button, then the projector can be used

as a power bank.

1 2

10 11

ON/OFF

POWER BANK MODE AND CHARGING METHOD

1When the projector is in power bank mode / projection

mode, the projector can charge other devices via

USB port.

2In order to improve charging efficiency, please charge

the projector with the original power adapter in

power bank mode.

3The number of indicators represent remaining capacity

of battery.

a. When the 4 indicators are all on and without

flashing,the capacity of battery is full.

b. When there is only one indictor on, the projector

is in low power status and can be used as power

bank for emergency.

c. If there is only one indicator flashing, it means all the power is used up and the

projector needs to be charged.

EZWIRE: SCREEN-SHARING VIA WIRE CONNECTION

iOS Device:

1. Select and click EZWire icon in the main projector interface.

2. Connect the projector and iOS device with USB cable.

3. The iOS device will pop up a prompt, as shown in the figure below "Step 3".

Select “trust” and then wait a moment, the screen content on the iOS device will be

displayed on the projector screen.

Android Device:

1. Select and click EZWire icon in the main projector interface.

2. Download “EZCast” APP by scanning the below QR code / scanning the QR code on

the EZWire interface / searching for “EZCast” in APP Store / Google Play / official

website www.ezcast.com, etc.

3. Connect the projector and Android device with USB cable.

4. Select in the “EZCast” APP, then follow the prompts to turn on the USB debugging

mode and USB tethering in the settings of the Android device.

5. Select on the top left corner of the “EZCast” APP, then select projector ID

“AKASO_FOCUS_ ******” to connect your Android device to the projector.

Trust This Computer?

Your settings and data will be

accossible from this computer when

connected

Trust Don’t Trust

EZWire

Step 1 Step 2

Step 1

Step 3

EZCast

Google Play

Step 2

EZCAST: SCREEN-SHARING VIA WIRELESS CONNECTION

Air Play Wireless Connection:

1. Select and click EZCast icon in the main projector interface.

2. Connect iOS device with the Wi-Fi hotspot “AKASO_FOCUS_ ******” provided by

EZCast interface, the password is “87654321”.

3. Open Air Play (Screen Mirroing) in the settings of the iOS device, select projector ID

“AKASO_FOCUS_ ******” in Air Play list, then wait a moment, the screen content on

the iPhone will be displayed on the projector screen.

(If iOS device and projector are already connected with the same Wi-Fi, there is no

need to connect with the hotspot provided by the EZCast interface)

Note:

1. Please make sure your Android device supports USB tethering.

2. Since the different Android device systems are different, the way to open USB

debugging mode and USB tethering is different. You can search for “How to open

the USB debugging mode and USB tethering of XXXXX Android device” in Google.

Cloud Storage

No device

Developer options

Debugging

USB debugging

Tethering & portable hotspot

USB tethering

Tethered

Allow USB debugging?

USB debugging is intended

for developement purposes

only, Use it to copy doto

oetween your computer

and your device, install

opps on your device

witnout notificotion, and

reod log date.

CANOL

Option 1:

Turn on USB Debugging mode to mirror

usb debugging mode need to turn on only one tinme

Option 2:

Turn on USB Tethering to mirror

Connect

AKASO_FOCUS_******

EZCast

Settings Wi-Fi

Wi-Fi

AKASO_FOCUS-781C01081

CHOOSE A NETWORK...

Screen Mirroing

Stop Mirroring

AKASO_FOCUS-781C01081

Step 1 Step 2

Step 3

Step 5

Step 4

Other devices EZCast connection:

1. Select and click EZCast icon in the main projector interface.

2. Download “EZCast” APP by scanning the below QR code / scanning the QR code on

the EZWire interface / searching for “EZCast” in APP Store / Google Play / official

website www.ezcast.com, etc..

3. Connect your device with the Wi-Fi hotspot “AKASO_FOCUS_ ******” provided by

EZCast interface, the password is “87654321”.

4. Select on the top left corner of the “EZCast” APP, then select projector ID

“AKASO_FOCUS_ ******” to connect your device to the projector.

5. Select on the top left corner of the “EZCast” APP, select “Mirror Off” to turn on

the Mirror function. Then wait a moment, the screen content on the iPhone will be

displayed on the projector screen.

EZCast

Settings Wi-Fi

Wi-Fi

AKASO_FOCUS-781C01081

CHOOSE A NETWORK...

EZChannel

Photo

Camera

Music

Video

Web

Cloud Storage

AKASO_FOCUS-781C0181

HDMI INPUT

1. Connect the projector and your device with HDMI cable.

2. Select and click HDMI icon in the main projector interface. Then wait a moment, the

screen content on your device will be displayed on the projector screen.

Step 1

Step 3 Step 4

Step 5

AKASO_FOCUS_******

Mirror Off

Settings

Settings(App)

DLNA

Help

THEME

EZCast

Step 2

App Strore | Google Play

Step 2

Step 1

SETTINGS DESCRIPTION

1. Select and click Settings icon in the main projector interface.

2. Select and click Management / Image / Network icon in the Settings interface to enter

the Management / Image / Network interface.

MEDIA LIBRARY

Support Micro SD Card & U-disk

1. Select and click Media icon in the main projector interface.

2. Select and click SD / USB icon in the main projector interface.

3. Then you can choose to read the contents of Micro SD card or U-disk on the

projection like photos, videos or music.

- Video format support: H.263H.264VC-1RV8/9/10 VC-1 MPEG-1MPEG-2

MPEG-4MKV,RM,RMVB etc. Support up to 1920*1080.

- Music Format support: MP1 / MP2 / MP3 / WMA / AAC / FLAC / APE / AMR-NB /

WAV / PCM / ADPCM.

- Picture Format support: jpg / png / bmp.

3. In the Management / Image interface, press the and button to cycle through

Function options and press the OK Button to select desired Function option. Then

press the and button to choose the Specification option. Press button to

return to the Management / Image interface. (If you use the remote control, you can

simply press the and button to cycle through Function options; and press the

and button to choose the Specification option)

Management Interface Image Interface

9 10

Media

Micro SD Card

USB

Photo

Video

Music

Media

Management Image Network

Front

Desktop

Projection Mode

Projection Location

Auto v Keystone

V. Keystone

Image

Brightness 6

Enter

HT20180710V1

USB

Set time

Volume

Firmware Version

Firmware Upgrade

Management

Language English

4. In the Network interface, press the button to choose the WiFi you want to connect

to, then press the OK button to confirm and enter the password interface. Use the the

, and OK buttons to enter the password. Then select on the interface,

press the OK button to confirm and complete the password input. The system will

automatically return to the settings interface after successful connection.

Network Interface Password Interface

1. Please do not disassembly and change any parts of the projector privately. Please find

the professional personnel for machine maintenance.

2. Please do not use the projector on blanket, pillow and other soft materials to keep the

normal heat dissipation of the machine.

3. Please do not look directly into the lens to avoid the strong light hurt your eyes.

4. Please do not use the projector near the river, or in high temperature or highly dust

polluted environment.

5. Please do not put any heavy things on the projector.

6. Please use the original power adapter to charge the projector.

SECURITY

Attention: when projector is working, please do not look directly into

the lens, the strong light will flash your eyes and cause slight pain if

your eyes are close to the lens. Children should use the projector

under the supervision of adults.

11 12

Language

Set time

Volume

Firmware Version

Firmware Upgrade

USB connection

Reset All

Brightness

Projection Mode

Projection Location

Auto V Keystone

V.Keystone

Auto V.angle.init

H.Keystone

Aspect Ratio

Digital Zoom

Color Temperature

Wall Color

From -40 to 40

From -32 to 32

From -25 to 25

Auto / L.Box / 16:9 / 4:3 / Full

Use the focusing wheel to adjust the focus

Normal / Warm / Cold

White / Dark Green / Pink / Light Blue / Light Yellow

On / Off

Front / Rear

Desktop / Ceiling

1 / 2 / 3 / 4 / 5 / 6 / 7

HT********V1

USB / OTA

English / Deutsch / Español / Français / Italiano /

简体中文 / 日本語, etc.

Use the and buttons to adjust the volume

Date: YY / MM / DD; Time: HH, MM (Use the the ,

and OK buttons for Date Time Selection)

Connect the projector and your computer with a USB

cable male to male, open the recovery tool on the

computer, then the recovery tool can recognize the

projector and start to work.

Management

Image

Settings Function Specifications

****

Boutique

TS-W

U10C022DA

C&S Home

WiFi

Springfield

****

WiFi

SSID: Springfield PWD: 00000001

[

]

;

Shift

Forget

‘

Del

1 2 3 4 5 6 7 8 9

Scan the following QR Code or enter the website to

download detailed user manual.

http://www.akaso.net/usermanual/Mini-Video-Projector.pdf

For any inquires, issue or comments concerning our products, please send E-mail to the

address below, and we will respond as soon as possible.

E-mail: [email protected]

US customer service line: (301)670-7335

9am-5pm EST Monday-Friday (except holidays)

USER MANUAL

AKASO Focus Quick Reference Manual

Brand: AKASO

Model: Focus

Category: Projectors

Type: Quick Reference Manual

Download PDF

report

AKASO Focus Quick Reference Manual

AKASO Focus Quick Reference Manual

Other documents