Page is loading ...
Vid eo
Aud io- in
PC RGB-
TV
HD MI2
HD M I1
1 2
1.
(1) (2)
Distance Setting: When the machine turns on, place it at the
position with a distance of 2-3.4 meters form the projection
screen, then rotate the lens clockwise or anticlockwise to pro-
jecting a sharp image as illustrated in pic.1 and pic.2
1. Vertical keystone correction
①
②
（1） （2） （3）
The vertical keystone correction is required when (1)-(3)
below appears during newly using this machine for the first
time.
Rotate the keystone knob clockwise or anticlockwise to
adjust the picture to quadrilateral shape as shown in (2) ,then
the vertical keystone correction succeeded.
①
②
③
If the picture appears big on the left and small on the right,
move the projector to the right slightly to correct the picture.
If the picture appears big on the right and small on the left,
move the projector to the left slightly to correct the picture.
The middle graphic is the correct position for projecting.
keystone button
Focus Adjustment
① ② ③
Horizontal keystone correction
Horizontal keystone correction
Device Requirements:
ios
Device
Resolution
Storage
ios 7 and above
All iphone model after iphone 4
All ipod model after ipod touch 4th generation
All ipad model after ipad2
iphone:480*320~1136*640
ipad:1024*768~2048*1536
At least 40MB free space needed
Step 1: Press the signal source button “S” on the projector or
remote control, then go to the signal source chosen menu. Enter-
ing Screen Mirroring Interactive interface by choosing “EZCAST”.
It will display a Wi-Fi network name and password as following
Step 2: Then turn on the “Wi-Fi” button on your iPhone/iPad, the
Wi-Fi name of this projector will be shown on your iPhone/iPad
network chosen list in 5 seconds. Please choose this network and
input the password, Wi-Fi connection for iPhone/iPad and this
projector will be succeeded.
Step 3: Swipe-up from the bottom of your iPhone/iPad screen to
open control center, then tap “AirPlay Mirroring”, choose the name
of the projector will be shown on the list, the screen of your
iPhone/iPad will be displayed by this projector.
Note: This function is only available for Poner Saund projector
GP9 version.
512CA
Wireless EZcast for iPhone/iPad Airplay Morrioring
Step 1: Press the signal source button “S” on the projector or remote
control, then go to the signal source chosen menu. Entering Screen
Mirroring Interactive interface by choosing “EZMirror”.
Step 2: Find Multi-screen/Miracast setting function on your Android
device, select and connect to the SSID shown on the projector inter-
face. Then the screen of your Android device will be displayed by the
projector. (Note: Miracast setting and display name will differ for dif-
ferent Android devices)
Phone
Resolution
Storage
Android 4.2 model with 1GB RAM
WVGA~ 1080P
At least 40MB free space needed
Note: This function is only available for Poner Saund
projector GP9 version.
Device Requirement:
ios
Device
Resolution
Storage
ios 7 and above
All iphone model after iphone 4
All ipod model after ipod touch 4th generation
All ipad model after ipad2
iphone:480*320~1136*640
ipad:1024*768~2048*1536
At least 40MB free space needed
Step 1: Connect your iPhone/iPad with this projector by your USB
cable, and touch the ”Trust” button shown on your iPhone/iPad.
Step 2: Press the signal source button“S”on the projector or
remote control, then go to the signal source to choose “EZWire”.
Entering Screen Mirroring Interactive interface. The screen of you
iPhone/iPad will be displayed by the projector automatically in 2
seconds.
Note: This function is available for Poner Saund projector GP9
and M5 version. The “EZWire” function is NOT RECOMMENDED
for android devices as there is a vast variety of different
android devices, there would be connection problem occurred
for some android devices.
Device Requirements:
Wireless EZMirrow Connection for Android
Mobile Device
USB Cable Connection for iPhone/iPad
Airplay Mirroring
/