Bluetooth to DALI+0/1-10V 2 in 1 Converter
70190002
Function introduction
Important: Read All Instructions Prior to Installation
Product Data
• DO NOT expose the device to moisture.
• DO NOT install with power applied to device.
• DO NOT set the DIP switches with power applied to the device.
Safety & Warnings
• Enable to control 1 DALI Group of devices or 1 DALI Address on DALI line
• With max. 50mA DALI bus power current output
• Bluetooth signal input, DALI signal output to DALI line or 0/1-10V signal output, 110-240VAC power input
• Bluetooth to DALI+0/1-10V 2 in 1 converter based on bluetooth mesh network
• DALI signal or 1-10V signal output selectable by DIP switch
• Enables to select the DALI address (00-63) to be controlled by DIP switches
• To supply control current to up to 25 DALI control gears
• Compatible with universal bluetooth gateway
• DALI address control mode or group control mode selectable by DIP switch
• Enables to select the DALI group (0-15) to be controlled by DIP switches
• Color control according to DALI specifications of Device Type 8,
• DALI DT6 or DT8 device type selectable by DIP switch under DALI mode
• Color type: Tc, XY coordinates, RGBW selectable by DIP switches
• Built-in DALI bus power supply, no extra DALI bus PS required
• With relay output, max. 5A for traditional incandescent & HV halogen lamps, max 1.6A for LED load
• Waterproof grade: Ip20
• Enable to control all devices on DALI line via broadcast
Operation
110-240V
power input
DIM
DT8 Tc
1 2 345678
2) Select DALI Device Type (DT6/DT8 Color Type) to be Controlled Using Dial Switches 8-9
DT8 XY Coordinates
DT8 RGBW
1 2 345678
910
Address Mode
1 2 345678
3) Select DALI Address or Group Control Mode Using Dial Switch 7
Group Mode
1 2 34567899 10
DALI
1 2 345678
1) Select DALI or 0/1-10V Output Using Dial Switch 10
0/1-10V
1 2 345678910
910
1 2 3 4 5 6 7 8 9 10
Dial up
Dial down
Note: please first select output signal by the dial switch.
Note: once DALI output is selected, please then select the DALI device type you would like to control by
the dial switches.
Note: once DALI device type is selected, please then select address control mode or group control mode
by dial switch.
0
1
2
3
4
5
6
1 2 345678
4) Select the DALI Group to be Controlled Using Dial Switches 2-6
Note: here device type is selected as DIM as an example, please select your correct DALI device type.
9
10
11
12
13
14
15
1 2 34567
7
910
Controlled group Controlled group
Note: 1) once DALI device type and group control mode are selected, please then select the DALI group
(0-15 selectable) to be controlled on DALI line by dial switches.
2) The control gears that are assigned to the selected DALI group on DALI line will be controlled.
3) The control gears shall be first grouped by a DALI master controller, please refer to the user manual of
corresponding master controller.
8
8
910
10
910
1 2 3 4 5 6 7 8 9 10
Dial up
Dial down
1 2 3 4 5 6 7 8 9 10
Dial up
Dial down
1 2 3 4 5 6 7 8 9 10
Dial up
Dial down
Broadcast
DA/-
DA/+
Prog.
Input Voltage: 110-240V AC
Output Current: 1x5A max
SR-2421-BL
Bluetooth to DALI+0/1-10V
2 in 1 Converter with Relay
DALI
0/1-10V
DALI Add.
ta:-20℃-+50℃
1 53 7 92 64 8 1 0
L
L1
N
N
Relay output,
max. 5A
DALI (DA, DA)
or
0/1-10V output (+, -)
LED indicator
Program key, short press 5 times to reset the device
Dip switches to select DALI or 0/1-10V output, DALI DT6 or DT8 color type, DALI address
or group control mode, DALI address to be controlled, DALI group to be controlled
Input Output, relay
110-240VAC Max. 4mA Max. 20mA
Max. Current
Power Current Operating
temperature
-20℃-+50℃
Signal
Output, DALI Output,
0/1-10V
DALI PS
current
Max. 50mA
DALI current
consumption
Switching
voltage
110-240VAC
Relative
humidity
8% to 80%
Environment
Dimensions
95x37x20mm
Others
Incandescent: 5A
LED: 1.6A
Bluetooth
2.4GHz
5) Select the DALI Address to be Controlled Using Dial Switches 1-6
Note: here device type is selected as DIM as an example, please select your correct DALI device type.
1 2 3456781 2 345678910
910
Controlled address Controlled address
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
Note: 1) once DALI device type and address control mode are selected, please then select the DALI address
(00-63 selectable) to be controlled on DALI line by dial switches.
2) The control gear with the selected DALI address on DALI line will be controlled.
6) Do wiring after above all settings are completed according to wiring diagram.
7) Pair the converter to the bluetooth mesh network and control it through the APP:
Step 1: Download the smart APP (searching “TuyaSmart” from App Store and Google Play) and setup an account.
Then add the bluetooth gateway.
Tap “Add Device”
Tap “Others”
Tap “+” to
add device
Step 2: Power on the bluetooth gateway and enable bluetooth on your smart phone, the gateway will be found.
Step 3: Select a WiFi network to configure the gateway to the internet, then the gateway will connect your
smart phone.
Step 4: The gateway is added successfully, then select to add device to the bluetooth gateway.
1 2 3 4 5 6 7 8 9 10
Dial up
Dial down
Tap “Gateway(Bluetooth)”
DA/ -
DA/ +
Prog.
Input Vol tage: 110-240V AC
Output C urrent: 1x5A max
SR-2421-BL
Bluetooth to DALI+0/1-10V
2 in 1 Converter with Relay
DALI
0/1-10V
DALI Add.
ta:-20℃- +50℃
1 53 7 92 64 8 10
L
L1
N
N
0/1-10V Dimmable
Driver
ACL
ACN
DIM+
DIM-
LED+
LED-
Step 5: Short press the “Prog.” button 5 times, the LED indicator will flash rapidly.
Tap “Lighting”
Tap “Lighting
(Bluetooth)”
Step 6: Then LED indicator will stay solid on to indicate the bluetooth to DALI+0/1-10V converter is added to
the gateway successfully. Then you can control it through the APP.
Wiring Diagram
When 0/1-10V Output Selected
L N
When DALI Output Selected
Note: 1) Max. 50mA DALI bus PS output to supply control current to up to 25 control gears.
2) The max. LED load of the relay is 1.6A, and the number of control gear can be switched by
the relay depends on the load of each control gear.
LED+ V+
LED- V-
LED light
L N
DALI Bus
DA
DA
DALI DT6/DT8 Control Gear
L
N
DA
DA
DALI DT6/DT8 Control Gear
L
N
LED+
LED-
LED+
LED-
LED+ V+
LED- V-
LED+ V+
LED- V-
LED light
LED light
Max. 1.6A for LED Load
Max. 1.6A for LED Load
DA/ -
DA/ +
Prog.
Input Vol tage: 110-240V AC
Output C urrent: 1x5A ma x
SR-2421-BL
Bluetooth to DALI+0/1-10V
2 in 1 Converter with Relay
DALI
0/1-10V
DALI Add.
ta:-20℃- +50℃
1 53 7 92 64 8 10
L
L1
N
N
/
