SOYO AVRO3002 User manual

SOYO AVRO3002 Ethernet Router Manual

1

ad

SOYO AVRO3002 Ethernet Router Manual

2

Table of Contents

0

1. Introduction………………………………………....…..

147

H4

1

H1.1. Product Overview .........................................................................

148

H4

2

H1.2. Package Contents ..............................................................................

149

H5

3

H1.3. Installation Requirements ..................................................................

150

H5

4

H2. Installation Guide…………………………………...….

151

H6

5

H2.1. Hardware Setup............................................................................

152

H6

6

H2.1.1 Front Panel ...................................................................................

153

H6

7

H2.1.2 Rear Panel....................................................................................

154

H7

8

H3. Default Values…………………………………………..

155

H8

9

H3.1. Password.......................................................................................

156

H8

10

H3.2. Default Network Settings .............................................................

157

H8

11

H3.3. Other Default Settings..................................................................

158

H8

12

H4. Configuring Your AVRO 3002 – Login………..……

159

H9

13

H5. Configuring Your AVRO 3002 – General Setup….

160

H10

14

H5.1. System.........................................................................................

161

H10

15

H5.1.1. Time Zone..........................................................................

162

H10

16

H5.1.2. Password Settings ............................................................

163

H10

17

H5.1.3. Remote Management .......................................................

164

H11

18

H5.2. WAN Settings..............................................................................

165

H12

19

H5.2.1. Dynamic IP.........................................................................

166

H12

20

H5.2.2. PPPoE................................................................................

167

H13

21

H5.2.3. Static IP..............................................................................

168

H14

22

H5.2.4. DNS ....................................................................................

169

H14

23

H5.3. LAN Settings...............................................................................

170

H15

24

H5.4. NAT Settings...............................................................................

171

H16

25

H5.4.1. Address Mapping ..............................................................

172

H16

26

H5.4.2. Virtual Server.....................................................................

173

H16

27

H5.4.3. Special Applications..........................................................

174

H17

28

H5.5. Firewall ........................................................................................

175

H18

29

H5.5.1. Access Control ..................................................................

176

H19

30

H5.5.2. URL Blocking.....................................................................

177

H21

31

H5.5.3. Schedule Rule ...................................................................

178

H22

SOYO AVRO3002 Ethernet Router Manual

3

32

H5.5.4. Intrusion Detection ............................................................

179

H23

33

H5.5.5. DMZ....................................................................................

180

H25

34

H6. UPnP…………………………..………….……….........

181

H26

35

H7. DDNS…………………………..………………….….....

182

H27

36

H8. Tools…………………………..…………………….…..

183

H28

37

H8.1. Configuration Tools....................................................................

184

H28

38

H8.2. Firmware Upgrade......................................................................

185

H28

39

H8.3. Reset............................................................................................

186

H29

40

H9. Status…………………………..…………….…..….….

187

H30

41

H9.1. Internet Connection....................................................................

188

H30

42

H9.2. Device Status..............................................................................

189

H31

43

H9.3. Security Log ................................................................................

190

H31

44

H9.4. DHCP Client Log ........................................................................

191

H32

45

H9.5. VoIP Status .................................................................................

192

H32

46

H9.6. VoIP Call Log..............................................................................

193

H33

47

HGlossary…………………………..……………………….....…..

194

H34

48

H

Compliances

…………………………..…………...….……..….

195

H41

SOYO AVRO3002 Ethernet Router Manual

4

1. Introduction

1.1. Product Overview

The AVRO 3002 is an advanced embedded telephony gateway and IP

sharing device providing powerful integration of the traditional voice

traffic and the Internet data traffic. It is used for connecting traditional

telephone sets to the data network. Its goal is to provide standard

Internet telephony service and access service to the SOHO and

enterprise users to save long-distance telephony bill. The AVRO 3002

is equipped with digital signal processors (DSPs) that convert analog

and digital voice into IP packets for transport through the IP network

using standard coders/decoders (codecs), including G.711, G.723.1

and G.729.A.

The AVRO 3002 comes with 2 FXS ports, which can provide 2

telephone devices the ability to transmit voice communication over the

Internet. It’s an ideal solution for businesses and corporations that can

immediately reduce their long-distance telecommunications costs.

The network architecture of AVRO 3002 is described below:

SOYO AVRO3002 Ethernet Router Manual

5

1.2. Package Contents

• One AVRO 3002

• One Power Adapter

• This Quick Installation Guide

• One User Manual

• One RJ-45 Ethernet Cable

• One RJ-11 Cable

1.3. Installation Requirements

Before proceeding with the installation of your AVRO 3002, please be sure

you have the following:

• A computer with an Ethernet network card installed.

• A CD copy of Microsoft Windows, if your computer is running

Windows 95, 98, ME, or 2000.

• A Broadband Internet connection such as cable or ADSL modem

• An additional Ethernet network cable.

• A Web browser such as Internet Explorer or Netscape.

SOYO AVRO3002 Ethernet Router Manual

6

2. Installation Guide

2.1. Hardware Setup

2.1.1 Front Panel

Mode Label Display Color Meaning

On (Green) Power on, normal operation

Blink Firmware loading

Power PWR

Off Power off or failure

On (Green) Green Link /Active : WAN Connection is OK

Blink (Green) Link /Active : data transmitting or receiving

WAN WAN

Off Link /Active : connection is not established

On (Orange) SIP Proxy registration is OK

VoIP Alert VoIP

Off SIP Proxy registration has failed

On (Green) Link /Active : Connection is OK

Blink Link /Active : data transmitting or receiving

LAN 1 – 4

Off Link /Active : connection is not established

On (Orange) Off hook

Blink Ring for Incoming call

Voice Phone1-2

Off On hook

On (Green) Internet connected Successfully

Internet Internet

Off Internet connected Failed

SOYO AVRO3002 Ethernet Router Manual

7

2.1.2 Rear Panel

Item Connector Function

1 12V DC Power connector.

2

RESET

(Reboot)

Reset button. Press for one second to reset the device or

press for 5 seconds to reset to the factory default.

3 WAN Connect to Cable or ADSL Modem

4

Local

(1-4)

4 port (10/100Mbps) RJ-45 connector, connect to PC

or local switch/hub.

5 Phone Connect to Phone set (or Connect to PBX CO Line)

2.1.3. Installation Instruction

1. Connecting a Phone set: Connect phone set directly to one of

the two Phone ports on the AVRO 3002

2. Connecting a Computer: Connect computers directly to the

AVRO 3002 on ports 1-4 of the LAN ports. If you have more than

4 computers to plug in, connect a hub or a switch (using its

uplink port) and connect additional computers to that device.

3. Connecting a Cable Modem or DSL Modem: Connect your

Cable or DSL modem to the WAN port on the rear panel.

4. Power: Plug the power cord into the power jack.

5. The device will boot up at this moment. Make sure the LED in

front panel light up correctly.

SOYO AVRO3002 Ethernet Router Manual

8

3. Default Values

3.1. Password

The default password is empty. For security reasons, we highly

recommend you to set up a password after logging into to the

system. If you forget the user password, you can press and

hold the reset button on the back of the router for 5 seconds.

When all the LEDs flash, your AVRO 3002 will be reset to the

factory default.

3.2. Default Network Settings

LAN Setup WAN Setup

IP Address 192.168.7.1

Subnet

Mask

255.255.255.0

DHCP

server

Enable

DHCP Client enabled

DHCP IP

range

100 IP addressed from 192.168.7.100 to

192.168.7.199

3.3. Other Default Settings

Time Zone Taipei

Firewall Off

WAN DHCP

UPnP Off

DDNS Off

SOYO AVRO3002 Ethernet Router Manual

9

4. Configuring Your AVRO 3002 – Login

Now that you have successfully configured your computer and retrieved

your new network settings from your AVRO 3002, you are ready to

configure the AVRO 3002’s settings for your LAN.

1. Open your Web browser (i.e., Internet Explorer or Netscape Navigator)

and click the stop button.

2. In the “Address” field type “http://192.168.7.1” and press <ENTER>.

3. The AVRO 3002 login screen will appear. The default Password

setting is empty. For security reasons, you should assign a password

as soon as possible. Note that the password login in case sensitive.

4. Once the user login successfully, the first page will appear as below:

SOYO AVRO3002 Ethernet Router Manual

10

5. Configuring Your AVRO 3002 – General Setup

5.1. System

5.1.1. Time Zone

Set the proper time zone and the configure time server for the AVRO 3002.

When you enable Automatic Time Server Maintenance option you will

need to configure time servers, use the options below to set the primary

and secondary NTP servers in your area

5.1.2. Password Settings

Set the password of the user. The Idle Time Out value is used for AVRO

3002 to log out automatically when no access to the web after this timeout

value.

SOYO AVRO3002 Ethernet Router Manual

11

5.1.3. Remote Management

The "Remote Management" feature can restrict remote user login from the

WAN port. The IP setting of "0.0.0.0" allows user from any IP address to

remote logged in to the device. When the 'Enabled" is not checked, remote

login is disabled.

The remote user can login using WAN IP. The default port number is 8080.

SOYO AVRO3002 Ethernet Router Manual

12

5.2. WAN Settings

The AVRO 3002 supports 3 types of WAN connection – Dynamic IP

(DHCP Client), PPPoE, and Static IP.

5.2.1. Dynamic IP

Under this mode, AVRO 3002 enables DHCP client to get IP address

automatically from your service provider. The Host Name is optional, but

may be required by some Service Provider’s. The default MAC address is

set to the WAN’s physical interface on the AVRO 3002. If required by

Service Provider, you use the <Clone MAC Address> button to copy the

MAC address of the Network Interface Card installed in your PC and

replace the WAN MAC address with this MAC address. If necessary, you

can use the <Restore> buttons to restore the WAN IP address.

SOYO AVRO3002 Ethernet Router Manual

13

5.2.2. PPPoE

Under this mode, AVRO 3002 is acting as a PPPoE client. Enter the

PPPoE user name and password assigned by your Service Provider. The

Service Name is normally optional, but may be required by some service

providers. Enter a Maximum Idle Time (in seconds) to define a maximum

period of time for which the Internet connection is maintained during

inactivity. If the connection is inactive for longer than the Maximum Idle

Time, then it will be dropped. You can enable the Auto-reconnect option to

automatically re-establish the connection as soon as you attempt to

access the Internet again

SOYO AVRO3002 Ethernet Router Manual

14

5.2.3. Static IP

If your Service Provider has assigned a fixed IP address, enter the

assigned IP address, subnet mask and the gateway address provided.

5.2.4. DNS

Most service providers provide a DNS server for speed and

convenience. If there is a DNS server that you would rather use, you need

to specify the IP address here. If you are static IP user, you must specify

DNS server IP. When primary DNS does not work, system will use

secondary DNS.

SOYO AVRO3002 Ethernet Router Manual

15

5.3. LAN Settings

The AVRO 3002 needs to have an IP address of the local network. You

can enable DHCP to dynamically allocate IP addresses to your client PCs.

When DHCP server is enabled, you need to enter the IP address range for

the local hosts.

The domain name field is empty in most case. In some special ISP need

input domain name field.

SOYO AVRO3002 Ethernet Router Manual

16

5.4. NAT Settings

5.4.1. Address Mapping

AVRO 3002 supports multiple global IP addresses. It allows IP

addresses used in a private local network to be mapped to one or more

addresses used in the public, global Internet. This page allows user to

enter up to 10 address mappings between a set of private IP addresses

and one global IP address. After setting, AVRO 3002 will map the set of

private IP addresses to the global IP address when accessing to the

Internet. This is very useful in the gaming and some particular

multimedia applications.

5.4.2. Virtual Server

AVRO 3002 is a NAT router. All the IP addresses coming in and going

out to AVRO 3002 can be converted between public and private IP

addresses. You can configure AVRO 3002 as a virtual server so that

remote users accessing services such as the Web or FTP at your local

sites via public IP address can be automatically redirected to local

servers configured with private IP address. In other words, depending

on the requested service (TCP/UDP), the AVRO 3002 redirects the

external service request to the appropriate server. After entering

parameters for some application, you must press “Add” button to confirm

SOYO AVRO3002 Ethernet Router Manual

17

this setting. To delete an entry in the table, click “Clean” button to clear

all fields in the entry.

Some of the popular applications and protocol/port numbers mapping

are defined below:

Application Protocol Port Number

Telnet TCP 23

FTP TCP 21

SMTP TCP 25

POP3 TCP 110

H.323 TCP 1720

SNMP UCP 161

SNMP Trap UDP 162

HTTP TCP 80

PPTP TCP 1723

PC Anywhere TCP 5631

PC Anywhere UDP 5632

5.4.3. Special Applications

Some applications require multiple connections, such as Internet

gaming, video conferencing, Internet telephony and others. These

applications cannot work when Network Address Translation (NAT) is

SOYO AVRO3002 Ethernet Router Manual

18

enabled. If you need to run applications that require multiple

connections, specify the port normally associated with an application in

the "Trigger Port" field, select the protocol type as TCP or UDP, then

enter the public ports associated with the trigger port to open them for

inbound traffic.

Some of the applications are listed below:

Example:

ID

Trigger

Port

Trigger

Type

Public Port

Public

Type

Comment

1 28800 UDP

2300-2400,

47624,

28800

UDP

MSN

Game

Zone

2 28800 UDP

2300-2400,

47624,

28800

TCP

MSN

Game

Zone

3 6112 UDP 6112 UDP Battle.net

5.5. Firewall

SOYO AVRO3002 Ethernet Router Manual

19

AVRO 3002 provides extensive firewall protection by restricting

connection parameters to limit the risk of hacker attack, and defending

against a wide array of common attacks. When firewall is enabled,

extra checking will be performed for each packets passing through the

device, the performance of the device will be greatly affected. To

enable the firewall feature, select <Enable> from firewall page:

5.5.1. Access Control

Access Control allows users to block PCs on your network from

gaining access to the Internet. The user can block PCs based on IP

and MAC address. When firewall is enabled, Access Control will be

enabled automatically. User can disable filtering feature manually.

When Access Control is enabled, all the packets will be allowed by

default, user can use <Normal Filtering Table> and <MAC Filtering

Table> to filter out un-allowed traffic.

Normal Filtering Table

User can press <Add PC> to edit packet filtering rules.

When user selects <Add PC>, the following <Access Control Add

PC> page will show up:

SOYO AVRO3002 Ethernet Router Manual

20

This page allows users to define service limitation of client PC,

including IP address, service type and scheduling rule criteria. For

URL blocking function, you need config URL address first in "URL

Blocking Site" page. For scheduling function, you also need config

schedule rule first in "Schedule Rule" page.

As shown above, user enter Client PC Description (NoteBook 1),

and it’s IP address (192.168.7.10

0),and select service name

<WWW> and <E-mail Sending>, and press <OK>. The follow page

will show up. After the setup, t

he PC with IP address192.168.7.100

will not be able to use WWW and sending e-mail. AVRO 3002 can

supports up to 32 filtering rule.

MAC Filtering Table

User can enter up to 32 MAC address, the PCs with these MAC

addresses will not be permitted to access Internet.

Page is loading ...

SOYO AVRO3002 User manual

This manual is also suitable for

SOYO AVRO3002 User manual

in other languages

Related papers

Other documents