CP-34 Series Call Point Instructions
Part Number:
P-MU-CP-34 Published on 2017.04.26
Copyright all rights reserved
87
55
87
93
87
55
87
93
Plastic case: Green / Red / White / Yellow / Blue
Dimensions: 87x93x55 mm (with clear plastic cover)
Contact resistance: 100mΩ
Contact Rating: Up to 1A 125VAC
Specifications
Unit: mm
(with clear plastic cover)
CP-34XBZ-LB
Plastic case: Green / Red / White / Yellow / Blue
Dimensions: 87x93x55 mm (with clear plastic cover)
Contact resistance: 100mΩ
Contact Rating: Up to 1A 125VAC
Specifications
Unit: mm
(with clear plastic cover)
Accessory
Model: CP-21-GL
Break Glass
Accessory
Model: CP-31-PL
Plastic Glass: 4-piece Replacements
Green G/
Red
R/
White
W
Yellow
Y/
Blue
BL
Backlight (Option)
Buzzer (Option)
CP-34XPBZ-LB
Plastic Glass
Part Number:
Green G/
Red
R/
White
W
Yellow
Y/
Blue
BL
Backlight (Option)
Buzzer (Option)
JP1 JP2
Jumper Settings for Backlight Illuminations
JP1 JP2
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
JP1
JP2
12V
24V
GND
NC
COM
NO
NC
COM
NO
Jumper at J1 Position
Backlight changes from blue
to red after the glass or plastic
element is broken.
Jumper at J2 Position
Backlight changes from blue to
green after the glass or plastic
element is broken.
Electromagnetic
Lock
Electromagnetic
Lock
Electromagnetic
Lock
Power
Supply
Power
Supply
Power
Supply
Power
Supply
Power
Supply
Power
Supply
Power
Supply
Power
Supply
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Switch 1
Switch 2
Switch 3Switch 4
Switch 1 Switch 2
Switch 3Switch 4
Switch 1 Switch 2
Switch 3
Power
Supply
Power
Supply
Power
Supply
Power
Supply
Alarm
Alarm
Buzzer
Power
LOCKED
UNLOCKED
LOCKED
Wiring Application for CP-34G/CP-34GP
Wiring Application for CP-34GBZ-LB/CP-34GPBZ-LB
NC
COM
NO
JP1
JP2
NC
COM
NO
NC
COM
NO
Electromagnetic
Lock
Switch 1 Switch 2
Switch 3
Alarm
Alarm
Power
Supply
Power
Supply
Power
Supply
Power
Supply
Buzzer
Power
UNLOCKED
12V
24V
GND
(For CP-34GBZ-LB/CP-34GPBZ-LB)
Model: CP-34G
P-MU-CP-34 Published on 2017.04.26
Copyright all rights reserved
Open the clear plastic cover. Press harder to break the plastic glass so that the internal switches will change status from NC to NO, triggering the connected devices.
* Remove the screw in the front of the call point and replace the plastic glass. The switches will then revert back to NC status.
Routine Testing
Open the clear plastic cover. Insert the test key into the hole so that the plastic glass will tilt to one side and the internal switches will then change status from NC to NO. Remove
the test key so that the switches revert back to NC status.
LOCKED LOCKED
LOCKED
Test Key
UNLOCKED
Operation Instructions
LOCKED
LOCKED
UNLOCKED
UNLOCKED
Model: CP-34GP
Model: CP-34GP
-
1
-
2
Gianni Industries CP-34GPBZ-LB Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
BEA 80.0011.02 User manual
-
Roger PRT42 User guide
-
DFI CS551 Owner's manual
-
Supermicro MBD-X7DCL-I-O User manual
-
Hager 2916 Installation Instructions Manual
-
-
Supermicro MBD-X7DWN+-O User manual
-
-
-