2. Steris
  3. Instrument Cleaning Brushes

Steris Instrument Cleaning Brushes Operating instructions

  • Hello! I've reviewed the product detail for STERIS Toothbrush-Style Cleaning Brushes. This document outlines the intended use, contraindications, cleaning, and maintenance for these instrument cleaning brushes. I'm ready to answer any questions you might have about the brushes, including their various bristle types and care instructions.
  • What are the intended uses for the STERIS Toothbrush-Style Cleaning Brushes?
    On what types of instruments should the stainless steel and brass bristles NOT be used?
    Are the brushes provided sterile?
    When and how should the brushes be cleaned?
    When should the brushes be replaced?
TOOTHBRUSH-STYLE
CLEANING BRUSHES
INSTRUMENT
CLEANING
BRUSHES
INTENDED USE:
STERIS Toothbrush-Style Cleaning Brushes are intended to be used as an aid in cleaning dirty
instruments during the cleaning and decontamination processes. The cleaning brushes with bristles
comprised of brass or stainless steel are intended to remove surgical soils that cannot be removed
using nylon bristles. The cleaning brushes with nylon bristles are imbedded with antimicrobial agents,
which prevent the growth of bacteria, mold and yeast on the surface of the bristles.
CONTRAINDICATIONS:
Stainless steel and brass bristles are not intended to be used on insulated, plated or coated instruments.
CLEANING & DISINFECTION:
New, unused brushes are provided non-sterile. Clean brushes after each use and disinfect between cases
or daily, at a minimum. Brushes can be cleaned manually or using an automated washer/disinfector.
INSPECTION:
Brushes should be inspected between uses and replaced when damaged (bent, frayed, worn, etc).
Damaged bristles and handles are ineffective in cleaning and may damage the device.
STORAGE:
Store brushes in a manner that will reduce cross-contamination.
DISPOSAL:
There are no special disposal instructions.
REFERENCED SKUS:
3pk Brush Configuration:
1B100B3, 1B43B3, 1B38B3
60ct Brush Configuration:
1B1007H, 1B437H, 1B387H
Distributed by:
Steris Corporation
7501 Page Avenue
St. Louis, MO 63133 ■ USA
800-548-4873
www.steris.com
63224
M-339A(618)
Product Made in China
Start Date: 5/29/18
6/5/18
2:00 pm
DC
STERIS Corporation
Products/Instrument Cleaning Brushes/Insert/Design
ALL BLACK
DO NOT PRINT SPOT RED 202 DIE LINE TEMPLATE
/