2. Steris
  3. Instrument Cleaning Brushes

Steris Instrument Cleaning Brushes Operating instructions

  • Hello! I've reviewed the product detail for STERIS Cleaning Brushes, including models 1B32B3, 1B40B3, 1B327H, and 1B407H. The document provides important information on their intended use, cleaning, and inspection. I'm ready to answer any questions you have about these brushes and their proper handling.
  • Are the cleaning brushes sterile?
    How should I clean these brushes?
    When should I replace the brushes?
GENERAL-STYLE
CLEANING BRUSHES
INSTRUMENT
CLEANING
BRUSHES
INTENDED USE:
STERIS General-Style Cleaning Brushes are intended to be used as an aid in cleaning dirty
instruments during the cleaning and decontamination processes.
CONTRAINDICATIONS:
There are no known contraindications and/or adverse effects.
CLEANING & DISINFECTION:
New, unused brushes are provided non-sterile. Clean brushes after each use and disinfect between
cases or daily, at a minimum. Brushes can be cleaned manually or using an automated washer/
disinfector.
INSPECTION:
Brushes should be inspected between uses and replaced when damaged (bent, frayed, worn, etc).
Damaged bristles and handles are ineffective in cleaning and may damage the device.
STORAGE:
Store brushes in a manner that will reduce cross-contamination.
DISPOSAL:
There are no special disposal instructions.
REFERENCED SKUS:
3pk Brush Configuration:
1B32B3, 1B40B3
60ct Brush Configuration:
1B327H, 1B407H
Distributed by:
Steris Corporation
7501 Page Avenue
St. Louis, MO 63133 ■ USA
800-548-4873
www.steris.com
63225
M-340A(618)
Product Made in U.S.A.
Start Date: 5/29/18
6/5/18
2:00 pm
DC
STERIS Corporation
Products/Instrument Cleaning Brushes/Insert/Design
ALL BLACK
DO NOT PRINT SPOT RED 202 DIE LINE TEMPLATE
/