2. Article
  3. SKU12922

Article SKU12922, SKU12923 Assembly Instructions

  • Hello! I've reviewed the Assembly Instructions for the LENIA Bed. This document provides detailed guidance on how to assemble the bed, including a parts inventory and step-by-step diagrams. I'm ready to answer any questions you may have about the assembly process or the components of the bed.
  • What tool is required for assembly?
    How should I handle the parts during assembly?
    What should I do to move the bed after assembly?
    How many people are needed for bed assembly?
    Where should the floating center legs be attached to?
Assembly Instructions
LENIA
Bed
VERSION 1.1
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
LENIA Bed Page 2 of 10
1 hour
5
PARTS INVENTORY
ID DESCRIPTION QTY
HEADBOARD 1
FOOTBOARD 1
CENTER BEAM BRACKET 2
LEFT SIDE RAIL 1
RIGHT SIDE RAIL 1
CENTER BEAM 1
CENTER LEG BRACKET
PREINSTALLED 2
FLOATING CENTER LEG 2
SLAT CLIP 28
SLAT 28
SLAT CENTER BRACKET 14
TIME
# OF PEOPLE
DIFFICULTY
Structural integrity is warranted only if all
fasteners are properly installed & tightened,
and the bed is moved only per instructions.
REQUIRED TOOL
Pozidriv screwdriver
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
FELT PAD 4
ALLEN KEY 1
M6 × 12MM BOLT 4
COMPRESSION FITTING
ANCHOR 10
M8 × 8MM SCREW 10
M6 × 20MM BOLT
PREINSTALLED 4
FELT STICK 2
Page 3 of 10
1
×4×4
LENIA Bed
DO NOT DRAG BED, ALWAYS LIFT WITH
AT LEAST TWO PEOPLE BEFORE MOVING
Page 4 of 10
2
LENIA Bed
×4
×2
Ensure center beam brackets
(C) are level when installed.
!
Page 5 of 10
3
LENIA Bed
×10
DO NOT use power tool.
Use only recommended
hand tools.
!
Page 6 of 10
4
LENIA Bed
Labels on side rails indicate orientation.
THIS SIDE UP / THIS SIDE HEADBOARD
!
×10
Page 7 of 10
5
LENIA Bed
Unscrew bolts (Q) from center leg
brackets (G) and floating center legs (H)
before attaching to center beam (F).
Attach floating center legs (H) where labels are
situated on center beam (F). Ensure that legs
are straight, perpendicular to center beam.
!
!
CENTER LEG
CENTER LEG
CENTER LEG
CENTER LEG
CENTER LEG
CENTER LEG
CENTER LEG
CENTER LEG
CENTER LEG
×4
Page 8 of 10
TTHI
HIS SIDE
S SIDE UUPP
THIS SIDE HEADBO
THIS SIDE HEADBOAARD
RD
×2
THIS SIDE UP
THIS SIDE HEADBOARD
6
Insert pins on center beam brackets
into center beam when installing.
!
Adjust levelers on floating center legs
to allow for a 2-3mm clearance.
!
×2
LENIA Bed
Page 9 of 10
LENIA Bed
7A
7B
THIS SIDE UP
THIS SIDE HEADBOARD
THIS SIDE UP
THIS SIDE HEADBOARD
×28
×28
Page 10 of 10
8
THIS SIDE UP
THIS SIDE HEADBOARD
LENIA Bed
DO NOT DRAG BED, ALWAYS LIFT WITH
AT LEAST TWO PEOPLE BEFORE MOVING
×28 ×14
First, firmly insert pins on
slat clips into side rails.
Second, firmly insert pins on slat
center brackets into center beam.
!
/