ANTI-TIP InstallationPage 1 of 3
20 min
3
TIME
REQUIRED TOOL
REQUIRED TOOL
8MM / 5/16" DRILL BIT
# OF PEOPLE DIFFICULTY
To prevent injury and property damage from unexpected
tipping of furniture, we highly recommend installation of
the anti-tip kit included with this product.
1010 Raymur Ave.
Vancouver, BC V6A 3T2
Children have died from furniture tipover.
To reduce the risk of furniture tipover:
• ALWAYS install tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang
on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lower drawers.
ANTI-TIP RESTRAINT INSTALLATION
WARNING!
PARTS INVENTORY
ID DESCRIPTION QTY
M8 × 51MM PLUG 4
MOUNTING PLATE 4
NYLON STRAP 2
M4 × 17MM SCREW 4
• Determine where the piece is to be placed
and mark location on the wall for the
mounting bracket screw holes. They should
be placed approximately below the top on
the back piece of furniture.
• Drill the hole and use the appropriate
wall plug that is suitable for your walls
composition.
• Attach the mounting bracket vertically to the
wall using appropriate fastener, through the
holes in the bracket and 2 wall plugs that
are suitable to your walland then tighten
securely.
• Next using the short screws attach the
2nd bracket to the back of the piece of
furniture’s top.
• Lace the nylon strap down through the
brackets. Slide the thin end of the strap
through the receivnhg end on the nylon
strap. Pull to tighten the piece of furniture
snug against the wall.
Attaching furniture to wall
with anti-tip kits:
M6 × 70MM SCREW 4