SmartBidet SB-3000 Installation guide

Brand: SmartBidet

Model: SB-3000

Type: Installation guide

CAUTION BEFORE INSTALLATION

Model: SB-3000

Quick Installation Guide

•

This product requires 120V usage.

•

Please do not plug in the electrical cord prior to installation.

•

Please consult with a licensed electrician if electrical work is needed.

In case a grounded outlet is not available, grounding should be done

in order to prevent short circuits or electric shock.

➍

Connect the metal hose to the T-valve

and water supply valve. Tighten.

NOTE: The end of the hose's diameter

is 3/8". Please check if your water

supply valve's diameter is the same.

All bathrooms water supply valves are

not the same. If it is not, please

purchase an adaptor that ts at your

local hardware store.

➎

Place the rubber nuts into the xing

holes of the toilet.

Rubber Nuts

➐

Slide the SmartBIdet onto the

baseplate until you hear a loud

“Click” sound.

➑

Connect the plastic tube from the side

of T-Valve to the side of the SmartBidet

and tighten. Turn on the water supply

and watch for any leaks.

➒

Wireless remote mounting guide.

Water supply valve

Insert provided batteries

(1.5V AAA) and close

battery cover.

Water supply hose

Double-sided

tape

Wall

➊

Shut o water.

➋

Removing existing seat.

➌

Connect T-Valve directly under toilet tank.

NOTE: DO NOT CONNECT T-VALVE TO

WATER SUPPLY VALVE AS INDICATED

ON PAGES 15, 16 IN THE MANUAL.

Existing pipe

or hose

Water Tank

T-Valve

Shut O Valve

Catch plate

Bolt Case

Mounting bolts

Bolt

Mounting

Bolt Case

Base Plate

➏

Place the bolt cases onto the baseplate

then place the mounting bolts through the

bolt cases. Screw bolts into rubber nuts

with a screwdriver and tighten.

SmartBidet SB-3000 Installation guide

SmartBidet SB-3000 Installation guide

SmartBidet SB-3000 Installation guide

Related papers

Other documents