Infinity IFX-615 Rotating Bar RGBW User manual

Infinity iFX-615 V2

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Ordercode: 41551

MANUAL

ENGLISH

1

Ordercode: 41551

Infinity iFX-615

Table of contents

Warning ............................................................................................................................................................................... 2

Safety Instructions ......................................................................................................................................................... 2

Operating Determinations .......................................................................................................................................... 4

Rigging ............................................................................................................................................................................ 4

Connection with the mains......................................................................................................................................... 5

Return Procedure .......................................................................................................................................................... 6

Claims .............................................................................................................................................................................. 6

Description of the device ................................................................................................................................................. 7

Frontside.......................................................................................................................................................................... 7

Backside ......................................................................................................................................................................... 8

Installation ........................................................................................................................................................................... 8

Set Up and Operation ....................................................................................................................................................... 8

Control Modes ............................................................................................................................................................... 9

One Infinity (Stand-alone) ........................................................................................................................................ 9

Multiple Infinitys (Master/Slave control) ................................................................................................................. 9

Multiple Infinitys (DMX control) ..............................................................................................................................10

Fixture Linking ...............................................................................................................................................................11

Data Cabling ...............................................................................................................................................................11

Control Panel ...............................................................................................................................................................12

Control Mode ..............................................................................................................................................................12

DMX Addressing ..........................................................................................................................................................12

Menu Overview ...........................................................................................................................................................13

Main Menu Options ....................................................................................................................................................14

1. DMX Addressing ...................................................................................................................................................14

2. Edit Mode ..............................................................................................................................................................15

3. Settings Menu .......................................................................................................................................................15

3.1. Color Balance ...................................................................................................................................................16

3.2. Life Time ..............................................................................................................................................................16

3.2.1. Set Password ..................................................................................................................................................16

3.3. Reset ...................................................................................................................................................................17

4. Built-in Programs ...................................................................................................................................................17

5. Test Menu ..............................................................................................................................................................18

6. System information ..............................................................................................................................................19

DMX Channels .............................................................................................................................................................19

25 channels ...............................................................................................................................................................19

49 channels ...............................................................................................................................................................25

Maintenance ....................................................................................................................................................................32

Replacing the Fuse .....................................................................................................................................................32

Troubleshooting ...............................................................................................................................................................32

No Light .........................................................................................................................................................................32

No Response to DMX..................................................................................................................................................33

Product Specifications ....................................................................................................................................................34

Dimensions ........................................................................................................................................................................35

Notes ..................................................................................................................................................................................36

2

Ordercode: 41551

Infinity iFX-615

Warning

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

 Infinity iFX-615

 Mounting bracket with quick-locks

 Pro power to Schuko power cable (1,5 m)

 User manual

LED Expected Lifespan

LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration

of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular

optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is

significantly reduced. If improving life expectancy is of higher priority, place care in providing for lower

operational temperatures. This may include climatic-environmental and the reduction of overall

projection intensity.

Safety Instructions

Every person involved with the installation, operation and maintenance of this device has to:

 be qualified

 follow the instructions of this manual

Before the initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

3

Ordercode: 41551

Infinity iFX-615

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the device.

 Never let the power cord come into contact with other cables! Handle the power cord and all

connections with the mains with particular caution!

 Never remove warning or informative labels from the unit.

 Never use anything to cover the ground contact.

 Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always

hold the fixture by the transport handles.

 Never place any material over the lens.

 Never look directly into the light source.

 Never leave any cables lying around.

 Do not insert objects into air vents.

 Do not connect this device to a dimmer pack.

 Do not switch the device on and off in short intervals, as this will reduce the device’s life.

 Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).

Allow the fixture to cool for at least 5 minutes before handling.

 Do not shake the device. Avoid brute force when installing or operating the device.

 Only use the device indoors, avoid contact with water or other liquids.

 Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly

fastened.

 Only operate the device after having familiarized with its functions.

 Avoid flames and do not put close to flammable liquids or gases.

 Always keep the case closed while operating.

 Always allow a free air space of at least 50 cm around the unit for ventilation.

 Always disconnect power from the mains, when device is not used or before cleaning! Only handle

the power cord holding it by the plug. Never pull out the plug by tugging the power cord.

 Make sure that the device is not exposed to extreme heat, moisture or dust.

 Make sure that the available voltage is not higher than stated on the rear panel.

 Make sure that the power cord is never crimped or damaged. Check the device and the power

cord from time to time.

 If the lens is obviously damaged, it has to be replaced.

 If device was dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

 If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your device. Leave the

device switched off until it has reached room temperature.

 If your Infinity device fails to work properly, discontinue the use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Infinity dealer for service.

 For adult use only. The moving head must be installed beyond the reach of children. Never leave the

unit running unattended.

 Never attempt to bypass the thermostatic switch or fuses.

 For replacement use fuses of same type and rating only.

 The user is responsible for correct positioning and operating of the Infinity. The manufacturer will not

accept liability for damages caused by the misuse or incorrect installation of this device.

 This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

 Repairs, servicing and electric connection must be carried out by a qualified technician.

 WARRANTY: Till one year after date of purchase.

4

Ordercode: 41551

Infinity iFX-615

Operating Determinations

 This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

 The minimum distance between light output and the illuminated surface must be bigger than 1

meter.

 The maximum ambient temperature ta = 40°C must never be exceeded.

 The relative humidity must not exceed 50 % with an ambient temperature of 40° C.

 If this device is operated in any other way than the one described in this manual, the product may

suffer damages and the warranty becomes void.

 Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.

You endanger your own safety and the safety of others!

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all

other safety issues.

Do not attempt the installation yourself!

Always have the inspections carried out by an authorized dealer!

Procedure:

 If the Infinity is lowered from the ceiling or high joists, professional trussing systems have to be used.

 Use a clamp to mount the Infinity, with the mounting bracket, to the trussing system.

 The Infinity must never be fixed swinging freely in the room.

 The installation must always be secured with a safety attachment, e.g. an appropriate safety net or

safety cable.

 When rigging, derigging or servicing the Infinity, always make sure, that the area below the

installation site is secured and that there are not any unauthorized people around.

The Infinity can be placed on a flat stage floor or mounted to any kind of truss with a mounting bracket, a

clamp and quick-locks.

Improper installation can cause serious injuries and/or damage of property!

5

Ordercode: 41551

Infinity iFX-615

Mounting a clamp to the bottom side of the Infinity moving head

Improper installation can cause serious injuries and/of damage of property!

Connection with the mains

Connect the device to the mains with the power-plug.

Always check if the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

L

BROWN

RED

YELLOW/COPPER

PHASE

N

BLUE

BLACK

SILVER

NEUTRAL

YELLOW/GREEN

GREEN

PROTECTIVE GROUND

Make sure that the device is always properly connected to the earth!

Improper installation can cause serious injuries and/or damage of property!

6

Ordercode: 41551

Infinity iFX-615

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

01) Your name

02) Your address

03) Your phone number

04) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

otherwise agreed in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the

invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement of which the obligation is resulting.

7

Ordercode: 41551

Infinity iFX-615

Description of the device

Features

The Infinity iFX-615 is a moving head effect with high output and great effects.

 Input voltage: 100-240V AC, 60/50Hz

 Power consumption: 160W

 Light source: 6 x 15W RGBW 4-in-1 Osram Ostar

 Light output: 440 lumen per pixel

 DMX channels: 25, 49 channels

 Control modes: Stand-alone, Master/Slave, DMX-512

 Control protocol: DMX-512

 Dimmer: 0-100%

 Strobe: 0-20Hz

 Dimming curves: Linear, Square, I-Square, S-curve

 Beam Angle: 4,5°

 Y-axis control: -15°/+15°

 LCD display with gravity sensor

 Pan: 540°

 Tilt: 270°

 Special: Continuous Pan/Tilt

 Housing: Metal & flame retardant plastic

 Connections: Neutrik PowerCON & 3-pin XLR IN/OUT

 Fuse: F4AL/250V

 Dimensions: 590 x 200 x 320 mm (LxWxH)

 Weight: 10,7 kg

Optional accessories

MOD41551 – Wireless DMX upgrade kit

The Wireless DMX upgrade kit should be installed ONLY by a qualified technician.

Do not attempt installation yourself!

Frontside

Fig. 01

01) 6 x 15W RGBW 4-in-1 Osram Ostar

02) LCD display + menu buttons

8

Ordercode: 41551

Infinity iFX-615

Backside

Fig. 02

03) 3-pin DMX signal connector IN

04) 3-pin DMX signal connector OUT

05) Fuse F4AL/250V

06) Ground/earth connection

07) Pro power connector 100-240V OUT

08) Pro power connector 100-240V IN

Installation

Remove all packing materials from the Infinity iFX-615. Check if all foam and plastic padding is removed.

Connect all cables.

Do not supply power before the whole system is set up and connected properly.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Connect the device to the main power supply.

9

Ordercode: 41551

Infinity iFX-615

Control Modes

There are 3 modes:

• Stand-alone

• Master/Slave

• DMX-512 (25CH, 49CH)

One Infinity (Stand-alone)

01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.

02) Always use a safety cable (ordercode 70140 / 70141).

03) Plug the end of the electric mains power cord into a proper electric power supply socket.

04) When the Infinity is not connected with a DMX cable, it functions as a stand-alone device.

Please see pages 14-19 for more information about the Stand-alone mode.

Multiple Infinitys (Master/Slave control)

01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.

02) Always use a safety cable (ordercode 70140 / 70141).

03) Use a 3-pin XLR cable to connect the Infinity.

The pins:

01) Earth

02) Signal -

03) Signal +

04) Link the units as shown in fig. 03. Connect the first unit's DMX "out" socket with the second unit's "in"

socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.

You can use the same functions on the master device as described on pages 14-19. This means that

you can set your desired operation mode on the master device and all slave devices will react the

same as the master device.

Multiple Infinitys (Master/Slave control)

Fig. 03

10

Ordercode: 41551

Infinity iFX-615

Multiple Infinitys (DMX control)

01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.

02) Always use a safety cable (ordercode 70140 / 70141).

03) Use a 3-pin XLR cable to connect the Infinity and other devices.

04) Link the units as shown in fig. 04. Connect the first unit's DMX "out" socket with the second unit's "in"

socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.

05) Supply electric power: Plug electric mains power cords into each unit's PowerCON socket, then plug

the other end of the mains power cord into proper electric power supply sockets, starting with the

first unit. Do not supply power before the whole system is set up and connected properly.

Multiple Infinitys DMX Set Up

Fig. 04

Note : Link all cables before connecting electric power

11

Ordercode: 41551

Infinity iFX-615

Fixture Linking

You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to

run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined

number of channels required by all the fixtures on a serial data link determines the number of fixtures the

data link can support.

Important:

Fixtures on a serial data link must be daisy-chained in a single line. To comply with the

EIA-485 standard, no more than 30 devices should be connected on one data link.

Connecting more than 30 fixtures on one serial data link without the use of a DMX optically

isolated splitter may result in deterioration of the digital DMX signal.

Maximum recommended DMX data link distance: 100 meters

Maximum recommended number of fixtures on a DMX data link: 30 fixtures

Data Cabling

To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables

directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,

please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic

interference.

DAP Audio DMX Data Cables

• DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin.

Ordercode FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).

• DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),

FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).

• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by

Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).

• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by

Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).

• DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),

FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).

12

Ordercode: 41551

Infinity iFX-615

Control Panel

A)

B)

C)

D)

E)

F)

G)

H)

I)

J)

K)

Home Button

Edit Menu Button

Settings Mode Button

Address Setting Button

Infinity Logo Button

Up Button

Down Button

OK/ENTER

Left Button

Right Button

LCD Display

Fig. 05

Control Mode

The fixtures are individually addressed on a data-link and connected to the controller.

The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,

the controller will display the saved DMX address the next time.)

DMX Addressing

The control panel on the front side of the base allows you to assign the DMX fixture address, which is the

first channel from which the Infinity will respond to the controller.

Please note when you use the controller, the unit has 49 channels.

When using multiple Infinitys, make sure you set the DMX addresses right.

Therefore, the DMX address of the first Infinity should be 1(001); the DMX address of the second Infinity

should be 1+49=50 (050); the DMX address of the third Infinity should be 50+49=99 (099), etc.

Please, be sure that you don’t have any overlapping channels in order to control each Infinity correctly.

If two or more Infinitys are addressed similarly, they will work similarly.

Controlling:

After having addressed all Infinity fixtures, you may now start operating these via your lighting controller.

Note: After switching on, the Infinity will automatically detect whether DMX 512 data is received or not. If

there is no data received at the DMX-input, the “LED“ on the control panel will not flash.

The problem may be:

 The XLR cable from the controller is not connected with the input of the Infinity.

 The controller is switched off or defective, the cable or connector is detective, or the signal wires are

swapped in the input connector.

Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure

proper transmission on the DMX data link.

Display Off after 30 seconds

When no button is pressed for 30 seconds, the display will turn off.

To light up the display, you have to press one of the menu buttons described above.

Once you have pressed the button, the display will light up.

13

Ordercode: 41551

Infinity iFX-615

Menu Overview

14

Ordercode: 41551

Infinity iFX-615

Main Menu Options

DMX address

Edit Mode

Settings Menu

Built-in Programs

Test Mode

Info

Home

Up

Edit Menu

Down

Setting Mode

OK

Address Setting

Left

Infinity Logo

Right

1. DMX Addressing

With this menu you can set the DMX address.

01) Press the button or press the buttons to select .

02) Press the button to enter the menu.

03) Press the to select and buttons to set the desired DMX channel. The adjustment

range is between .

04) Once you have set the DMX address, press the button to store.

15

Ordercode: 41551

Infinity iFX-615

2. Edit Mode

With this menu you can set your desired mode.

01) Press the button or press the buttons to select .

02) Press the button, to confirm. You can choose one of the 3 available modes.

03) Press the buttons to select the required mode:

04) Once you have selected the desired mode, press the buttons to change the value from

NO to YES.

05) Press the button to confirm your choice.

06) If the device has been set to Master mode, all the connected slave devices will act the same as the

master device.

07) If the device has been set to slave, it will react the same as its master device.

3. Settings Menu

With this menu you can set your desired mode.

01) Press the button or press the buttons to select .

02) Press the button, to enter the menu. You can choose from 18 different modes.

03) Press the buttons to select the required mode:

04) Once you have selected the desired mode, press the button to proceed to edition.

16

Ordercode: 41551

Infinity iFX-615

05) Press the buttons to change the value from NO to YES.

06) Some of the available menus have different options to the regular, YES or NO function:

 Pan Angle: 540°, 360°, 180°

 Tilt Angle: 270°, 180°, 90°

 Fans: Auto, Silent, Full

 C Mixing Mode: RGBW, CMY

 Dimmer Curve: Linear, Square, I-Square, S-Curve

 Dimmer Speed: Smooth, Fast

3.1. Color Balance

With this menu you can set the device’s color brightness.

01) Press the buttons to select Color Balance and press the button to open the menu.

02) You can now adjust 4 colors: Red, Green, Blue, White.

03) Choose the desired color, press the button and then press the buttons to set the

value. The adjustment range is between 0-255, from dark to brightest.

04) You can combine Red, Green, Blue and White to create an infinite range of colors.

3.2. Life Time

With this menu you can reset the device’s counters.

01) Press the buttons to select Life Time and press the button to open the menu.

02) Press the buttons to choose one of the 3 reset options:

 Time Counter (the time counter will be reset)

 Total Life Time (the device’s operation time counter will be reset)

 Set Password

03) If you select Time Counter or Total Life Time, press the button to open the selection menu.

04) Press the buttons to choose either YES or NO. Press the button to confirm.

3.2.1. Set Password

With this menu you can set the new password for the device.

01) Press the buttons to select Set Password and press the button to open the menu.

02) The following screen will pop up:

03) Press the buttons to select the digit which you want to edit.

04) Press the buttons to adjust the values.

17

Ordercode: 41551

Infinity iFX-615

3.3. Reset

With this menu you can reset the device’s settings.

01) In Settings menu, press the buttons to select Reset Function and press the button to

open the menu.

02) Press the buttons to choose one of the 2 options:

 Pan/Tilt (Pan/Tilt reset)

 All (complete settings reset)

03) Once you have chosen the desired option, press the button to proceed to edition mode.

04) Press the buttons to choose between YES or NO.

05) Press the button to confirm your choice.

4. Built-in Programs

With this menu you can set your desired built-in program.

01) Press the button or press the buttons to select .

02) Press the button to enter the menu.

03) Press the buttons to select the desired built-in program.

04) Press the button to confirm your choice.

05) Press the buttons to choose either YES or NO and press the button to activate the

desired built-in program.

18

Ordercode: 41551

Infinity iFX-615

5. Test Menu

With this menu you can test the device’s functions.

01) Press the button or press the buttons to select .

02) Press the button to enter the menu.

03) Press the buttons to choose one of the 2 modes:

 Auto Test

 Manual Test

04) Press the button to confirm your choice.

05) If you have selected Auto Test mode, the device will automatically test all its functions.

06) If you have selected Manual Test mode, press the buttons to select the desired option.

07) Press the buttons to change the values from 0 to 255.

08) Once you have adjusted the desired setting, press the button to store changes.

19

Ordercode: 41551

Infinity iFX-615

6. System information

With this menu you can set your desired mode.

01) Press the button or press the buttons to select .

02) Press the button to enter the menu.

03) The following screen will pop up:

04) You can now monitor the device’s current software version, current active mode, current DMX

starting address, current temperature, total operation time counter and time counter.

DMX Channels

25 channels

Channel 1 – Horizontal movement (Pan)

Move the slider up, in order to move head horizontally (PAN).

Gradual head adjustment from one end of the slider to the other (0-255, 128-center).

The head can be turned by 540° and stopped at any position you wish.

Channel 2 – Vertical movement (Tilt)

Move the slider up, in order to move head vertically (TILT).

Gradual head adjustment from one end of the slider to the other (0-255, 128-center).

The head can be turned by 270° and stopped at any position you wish.

Channel 3 – Pan fine 16 bit

Channel 4 – Tilt fine 16 bit

Channel 5 – PAN/TILT Speed

0-255

From fast to slow

Channel 6 – Continuous Pan

0

Not functional

1-127

Counterclockwise rotation, from slow to fast

128-255

Clockwise rotation, from slow to fast

Channel 7 – Continuous Tilt

0

Not functional

1-127

Counterclockwise rotation, from slow to fast

128-255

Clockwise rotation, from slow to fast

Page is loading ...

Infinity IFX-615 Rotating Bar RGBW, iFX-615 User manual

Related papers

Other documents