Page is loading ...
Technical parameter
Control channel: 3 DMX 512 channels
Voltage: AC100V/240V, 50-60Hz
Power consumption: 450W
Light source: 864 pieces 0.5W (S5730) white high brightness LED
Control mode: DMX512, master / slave, auto
Applicable occasion: dance hall, bar, compartment
LCD Display:
3 DMX Values and Functions
Channel
Function
Value
Color Function
CH1
All Dimmer
0—255
All dimmer
CH2
Strobe
0—255
Strobe, from slow to fast
CH3
Dimmer
0—255
Dimmer
Maintenance
Please make sure that the light power is cut when you plan to take apart the
light or start to do any maintenance job. Keep the light clean is very important.
If you do this, the light will output the maximum brightness and maintain its
life span. We suggest that you used qualified professional glass cleaner to clean
the light, and with flannel. And never use alcohol or chemical solvents. The
inner of the light should be cleaned annually with vacuum.
Warning
Never detaching or converting the light
Never make the light touch water or other liquid or metal.
Never install the light in high temperature environment.
Never make the light beam shoot at some combustible matter. The distance
between the light and combustible matter should be at least two meters.
The distance between the light and some adjacent objects should be at least 0.5
meter.
You’d better not watch the light beam directly; it will hurt your eyes in some
degree.
Please make sure that the power is in off situation before opening or repairing
the light.
NO.
Display
Function
1
Adder-d.001
Addressing, (001—512), B to add addressing
data, C to reduce addressing data
2
L001-L255
Manual dimmer, from dark to bright
3
P001-P255
Manual strobe, from slow to fast
/
