Hubbell TD06033E Installation guide

Type
Installation guide
FULL ROUND GUY MARKER
WITH SPIRAL PIGTAIL
INSTALLATION INSTRUCTIONS
2
©Copyright 2014 Hubbell Incorporated | www.hubbellpowersystems.com | Adjust-A-Grip Installation
Position Guy Marker so that top of Marker is
upward on the strand.
Note: the TOP end is located opposite of the
end with the zip tie.
Pull the pigtail out of the Guy Marker.
Place the strand through the slotted “V
opening and push Marker down onto the
strand until you get to the beginning of the
pigtail.
Before wrapping the pigtail, make sure that
the bottom end of Marker is at the desired
location. Pull Marker out slightly away from
the strand and wrap pigtail onto the strand.
STEP 1
STEP 3
STEP 2
STEP 4
3
With pigtail completely wrapped onto strand,
continue to place the strand through the
slotted “V” opening and push Marker down
onto the strand until it is completely installed.
Wrap the zip tie strap around the Marker and
place the zip tie strap through its self-locking
tab.
Insert zip tie strap through the two slots.
Complete the Guy Marker installation by
pulling the zip tie strap to tighten securely.
Note: The Marker may be slid downward
to desired location but will resist upward
movement.
STEP 5
STEP 7
STEP 6
STEP 8
©Copyright 2014 Hubbell Incorporated | www.hubbellpowersystems.com | Adjust-A-Grip Installation
©Copyright 2014 Hubbell Incorporated | www.hubbellpowersystems.com | Adjust-A-Grip Installation
Hubbell has a policy of continuous product improvement. Please visit hubbellpowersystems.com to confirm current design specifications.
H u b b e l l P o we r Sy s tem s ( H P S ) ma n uf act u re s a wi d e vari e t y o f tr a nsm i s s i on , dist r i b u t i o n , sub s tati o n , O E M , und e r g ro u nd an d co m m u ni c atio n s pro d u c t s
used by utilities. HPS products are also used in the civil construction, transportation, gas and water industries. Our product line includes construction,
switching and protection products, hot line tools, insulators, arresters, pole line hardware, cable accessories, test equipment, transformer bushings,
connectors, grounding equipment and polymer precast enclosures and equipment pads.
TD_06_033_E
About Hubbell Power Systems:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Hubbell TD06033E Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI