THUREN FABRICATION TF-2500RCSPCR User manual

Hello! I have reviewed the instructions for the Thuren Fabrication Height Shim Kit (HSK). This document provides detailed information on how to install the kit on 2014-2023 Ram 2500 and Power Wagon trucks. It includes instructions on achieving different lift heights using the included spacer plates and black top plate, as well as the required torque settings. I'm here to answer any questions you have about the installation or features of this kit.
Which vehicles are compatible with Height Shim Kit?

What are the lift options with this kit?

What is the minimum height option?

What is the maximum height option?

What is the required torque for the hardware?

Thuren fabrication

height shim kit (hsk)

These instructions are applicable to

the following Trucks:

• 2014 - 2023 Ram 2500

• 2014 - 2023 Power Wagon

Applicable Part Numbers:

(TF-2500RCSPCR-KIT)

note

warning

This kit will require removal of the rear coils for install. View our instructions for Rear

Coil removal in our Tech Data section at www.thurenfabrication.com

1. Installation

• Determine how many spacers you want to install. 1 = 5/8” lift, 2 = 1” lift, or 3 = 1-3/8” lift.

• Once the Rear Coils are removed, the Coil Spacer will bolt onto the Axle Seat where the Coil Previously sat.

• The supplied Black Top Plate will go on top of the Aluminum Spacer Plates and replicate the OEM mounting

surface for your coil.

• Torque Hardware to 25 Ft/Lbs

The minimum height option is one Spacer Plate and the Black Top Plate. Use the shorter

bolts if you choose this option. Maximum Height is 3 Spacer Plates and Black Top Plate.