easee Equalizer User guide

Brand: easee

Model: Equalizer

Type: User guide

easee Equalizer is a device that optimizes power consumption by automatically balancing the load between your Easee Charging Robot(s) and your building, preventing power interruptions while charging your electric vehicle (EV). It also features a smart meter communication port, allowing you to monitor your energy usage through the Easee App. Additionally, the Equalizer has an RFID/NFC reader for easy access control and supports Modbus connection to your energy meter for advanced energy management.

Easee Equalizer

User guide / Installation guide

Brukerveiledning / Installasjonsveiledning

Användarmanual / Installationsguide

Brugervejledning / Installationsmanual

Käyttöohje / Asennusohje

Benutzeranleitung / Installationsanleitung

Gebruikershandleiding / Installatiehandleiding

Mode d'emploi / Instructions d'installation

Manuale utente / Guida d'installazione

Guía de usuario / Guía de instalación

English

Norsk 10

Svenska 18

Dansk 26

Suomi 34

Deutsch 42

Nederlands 50

Français 58

Italiano 66

Español 74

Introduction

Product overview

Safety instructions

Technical speciﬁcations

Installation

Customer setup

Installer setup

Daily use and operation

LED colours meaning

Practical details

Table of contents

IMPORTANT:

Read carefully before use. Keep for future

reference. When passing on the product,

ensure this guide is also passed on.

This manual concerns the two versions of

the product: Easee Equalizer (E02-EQP)

and Easee Equalizer HAN (E02-EQ). All

instructions apply to both versions, unless

speciﬁed otherwise.

Intended use

This product is intended for optimizing

the power consumption by performing an

automatic load balancing between the

Easee Charging Robot(s) and the building.

It is used to avoid overload and power

interruptions while the electric vehicle (EV) is

being charged.

The product may only be operated with the

approved operating parameters and under

the speciﬁed environmental conditions (see

page 5). Uses other than those speciﬁed

here are not permitted.

Operating conditions

The product needs to be paired with

a Charging Robot and connected to a

supported meter with the cable provided.

In order for the Equalizer to work, the

smart meter’s communication port in most

Introduction cases needs to be activated. The Equalizer

supports several smart meters. Find a full

list of compatible meters at easee.support.

For installation and operation purposes,

a smartphone with internet connection is

needed.

Optimal performance

The Equalizer makes it possible to charge

smarter, safer and faster if the installation

is scaled accordingly. To enable its true

potential, the rated value of the chargers

circuit fuse should be as high as possible

compared to the main fuse. Even in 1-phase

setups, we recommend using a 3-phase

cable to future proof the installation.

Safety instructionsProduct overview

Equalizer

LED

Touch button

Magnetic backside

Wall mounting kit

For non-metallic surfaces x1

Cable

Read the entire manual carefully before

installing and operating the product.

Observe the following instructions:

— Do not use the product if it is damaged

or does not function properly.

— Always have any repair work carried

out by an authorised electrician and in

accordance with local requirements.

— This product is intended for indoor use

in dry locations only. If placed outside

the house, it must be installed inside a

cabinet protected from the weather.

— Do not immerse the product in water or

other liquids.

— Avoid direct sunlight or heat exposure.

— Keep product away from open flames

and extreme heat.

— Make sure that children do not play with

the product.

General

Product (mm): H: 110 x W: 110 x D: 27.5

Packaging (mm): H: 130 x W: 130 x D: 39

Permitted temperature: -20 °C to +50 °C

Weight: 95 g (Equalizer) and 110 g (Equalizer

HAN)

IP degree: IP40

Supply: 5-30 V DC 100 mA (Equalizer) and

20-32 V DC 30 mA (Equalizer HAN)

RJ12 connector

Cabling

Cable length: 1.5 m

RJ12 to RJ12 custom made cable (Equalizer)

and RJ12 to RJ45 custom made cable

(Equalizer HAN)

It can be extended using an extension cable:

up to 15 m (Equalizer) and up to 200 m

(Equalizer HAN)

Technical speciﬁcations Max transmitted power

Radio: 25 mW at 863–870 MHz.

WiFi: 50 mW at 2.4–2.472 GHz.

Connectivity

Easee Link RFTM and WiFi1

HAN (NVE/AMS) (Equalizer HAN) or P1

(Equalizer) smart meter communication

Modbus connection to energy meter2

Monitor power consumption with

the Easee App

RFID / NFC reader

1 WiFi is required for normal operation and for future software

updates. When oﬀline or unstable, it will use Easee Link RFTM

as backup in small installations with one primary charger.

Easee Link RFTM via radio may be limited by walls, concrete

or other obstacles.

2 Only for supported meters.

RJ12 (6 pins) RJ45 (8 pins)

HAN port

Installation

Easee App Equalizer

Activation

Customer setup

Download Setup2 3

Scan the QR code to

download the Easee App

and create a free account.

Add the Equalizer in the

app, follow the on-screen

installation guide and get

ready to balance your

energy smarter than

ever before!

In Scandinavia, the

communication port on the

smart meter is most likely

not activated. Contact

your utility company to

open the HAN port for use

with the Equalizer.

If you are not in

Scandinavia, skip to step 2.

Follow these steps if you are a private customer installing the

Equalizer in your own household.

Add product

Smart meter

12345 kWh

HAN / P1 easee.com/app

Installer App

Installation

Equalizer Smart meter

Download

Installer setup

Setup Connect1 2 3

Add the Equalizer to a

new or existing charging

site using the Installer App

and follow the on-screen

installation guide to set

it up.

Scan the QR code to

download the Installer App

and create a free account.

Connect the Equalizer to

the smart meter using

the provided cable. The

Equalizer will appear in the

Easee Portal after a while.

Follow these steps if you are an installer and use the

Installer App to conﬁgure the Equalizer in large commercial

installations or private households.

12345 kWh

Smart meter

HAN / P1

easee.com/installer-app

Touch the Easee logo in the middle to

check power consumption:

Blue, fast flashing – High power

consumption

Blue, slow flashing – Low power

consumption

Count the flashes for percentage –

1 flash (10%), 2 flashes (20%),

up to 10 flashes (100%)

Hold the Easee logo for 3 seconds

to check connectivity. You will see

2 flashes:

1st flash – Easee Link RF status7

2nd flash – WiFi status

Green – Connected

Red – Not connected

LED colours meaning

3 Use the Easee App to set up the WiFi.

4 Contact your utility company to activate the HAN port.

5 Go to http://easee.support.

6 Check your internet connection.

7After booting, it can take a few minutes before Easee Link

RFTM status flashes green.

White, fast flashing – Booting

White, breathing every 10s – Normal

operation

Red / white, switching – No WiFi

added3

Red, flashing – No data from power

meter4

Red, breathing every 10s – Error5

Purple, breathing every 10s – Oﬀline

operation6

3''

Practical details

Warranty

The device is free from material defects and

is in accordance with laws and regulations

for consumer protection in the country

where the product is purchased. All correctly

installed Easee hardware is covered by our

3 years* limited warranty.

*Some countries may have extended

warranty.

Standards

Hereby, Easee AS declares that the radio

equipment types Easee Equalizer (E02-EQP)

and Easee Equalizer HAN (E02-EQ) are in

compliance with Directive 2014/53/EU.

The full text of the EU Declaration of

Conformity is available at the following

internet address: easee.support.

Maintenance

This product requires no maintenance. If it

needs to be repaired, please contact your

Easee supplier.

Storage

The product should be stored in a tempered,

dry and well-ventilated area in order to

preserve the packaging and its contents.

Relative humidity should not exceed 80 %

and no corrosive gas should be present.

Storage or transportation environment

should never exceed the limits provided in

the technical speciﬁcations.

Disposal

A crossed-out dustbin symbol indicates that

a product and its accessories must not be

disposed of in household waste at the end of

their lifecycle. For the return of old devices,

free collection and acceptance points may

be available in your vicinity. Observe local

regulations for correct and environmentally

friendly disposal. If the electronic equipment

contains personal data, you are responsible

for deleting it yourself before returning it. This

can be done via Easee App or Installer App.

Returns and complaints

Contact your distributor or Easee Customer

Support at easee.support regarding the

return and complaint of your product.

THIS DOCUMENT CONTAINS INFORMATION THAT IS

SUBJECT TO CHANGE WITHOUT NOTICE.

The latest version of this publication can be

downloaded at http://easee.support

No part of this publication may be reproduced or

transmitted in any form or by any means, electronic

or mechanical, including, but not limited to, copying,

recording, retrieving data, or computer networks

without the written permission of Easee AS.

Easee and all other Easee product names and

slogans are trademarks or registered trademarks of

Easee AS. Easee products can be protected by one

or more patents.

All other products and services mentioned may

be trademarks or service marks of their respective

owners.

Illustrations of the product and user interface

are exemplary and may diﬀer from the actual

appearance.

November 2022 - Version 4.06

Contact details

Easee AS

Grenseveien 19

4313 Sandnes, Norway

Org. nr: 920 292 046

You can ﬁnd additional contact details for your

country at easee.com.

Easee AS

Grenseveien 19

4313 Sandnes, Norway

.easee.com

easee Equalizer User guide

easee Equalizer User guide

easee Equalizer User guide

Related papers

Other documents