CLEANING AND MAINTENANCE
Hydration Reservoirs:
To clean your hydration reservoir use hot water and mild soap, then rinse thoroughly with hot water.
For tough cleaning jobs, add 2 teaspoons of baking soda to a full reservoir of water and let soak overnight. Rinse
thoroughly and air dry.
To sanitize, add 2 teaspoons of unscented household bleach to a reservoir full of clean water and let soak overnight.
Rinse thoroughly and air dry.
Store your hydration system in a cool dark place.
Prior to each use, ll the reservoir, tighten the cap, then squeeze the reservoir and watch for leaks to ensure that the cap
is sealed properly.
When freezing, ll reservoir no more than 3/4 full.
Packs:
NOTE: Wash packs in a FRONT LOAD WASHING MACHINE ONLY.
Washing Instructions:
Clean off excessive dirt and debris by hand.
Connect all buckles and tighten straps.
Wash in a front load machine only with warm water and a mild detergent.
Tumble dry low or air dry.
If possible, store your pack in a cool, dry place.
Reservoir
Pack
Drinking Tube
Form No. 5902394
Rev. A
USA Canada
3833 SALA Way 260 Export Boulevard
Red Wing, MN 55066-5005 Mississauga, Ontario L5S 1Y9
Toll Free: 800-328-6146 Toll Free: 800-387-7484
Phone: (651) 388-8282 Phone: (905) 795-9333
Fax: (651) 388-5065 Fax: (905) 795-8777
www.capitalsafety.com www.capitalsafety.com
This manual is available for download at www.capitalsafety.com.
A Capital Safety Company