Aaeon IMBM-Q87A User manual

Industrial Motherboard

IMBM-Q87A

ii

E15317

Second Edition

March 2019

Copyright Notice

This document is copyrighted, 2019. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products described

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to

change without notice. While reasonable efforts have been made in the preparation

of this document to assure its accuracy, the original manufacturer assumes no

liabilities resulting from errors or omissions in this document, or from the use of the

information contained herein.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• AMI is a trademark of American Megatrends Inc.

• Intel

®

, Core™ are trademarks of Intel® Corporation.

• Microsoft Windows

®

is a registered trademark of Microsoft Corp.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

iii

Contents

Chapter 1: Product overview

1.1 Package contents ......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specications ............................................................................... 1-2

Chapter 2: Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Screw size ..................................................................................... 2-4

2.3.1 Component side .............................................................. 2-4

2.3.2 Solder side ...................................................................... 2-5

2.4 Central Processing Unit (CPU) ................................................... 2-6

2.4.1 Installing the CPU ........................................................... 2-7

2.4.2 CPU heatsink and fan assembly installation ................... 2-9

2.5 System memory ......................................................................... 2-11

2.5.1 Installing a DIMM .......................................................... 2-12

2.6 Jumpers ...................................................................................... 2-13

2.7 Onboard LEDs ............................................................................ 2-15

2.8 Connectors ................................................................................. 2-16

2.8.1 Rear panel connectors .................................................. 2-16

2.8.2 Internal connectors ....................................................... 2-18

Chapter 3: BIOS setup

3.1 BIOS setup program .................................................................... 3-1

3.1.1 BIOS menu screen .......................................................... 3-2

3.1.2 Menu bar ......................................................................... 3-2

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-3

3.3.1 S5 RTC Wake Settings ................................................... 3-3

3.3.2 Dynamic Digital IO .......................................................... 3-4

3.3.3 ACPI Settings .................................................................. 3-4

3.3.4 Trusted Computing ......................................................... 3-4

3.3.5 CPUConguration .......................................................... 3-5

iv

3.3.6 SATAConguration ........................................................ 3-5

3.3.7 PCH-FWConguration ................................................... 3-6

3.3.8 AMTConguration .......................................................... 3-6

3.3.9 USBConguration .......................................................... 3-6

3.3.10 F81216SecondSuperIOConguration ......................... 3-7

3.3.11 NCT6791DSuperIOConguration ................................ 3-7

3.3.12 NCT6791D HW Monitor .................................................. 3-8

3.4 Chipset menu ............................................................................. 3-11

3.4.1 SystemAgent(SA)Conguration ................................. 3-11

3.4.2 PCH-IOConguration ................................................... 3-12

3.5 Boot menu .................................................................................. 3-13

3.5.1 BootConguration ........................................................ 3-13

3.5.2 Boot Option Priorities .................................................... 3-13

3.6 Security menu ............................................................................ 3-14

3.6.1 Administrator Password ................................................ 3-14

3.6.2 User Password .............................................................. 3-14

3.7 Save & Exit menu ....................................................................... 3-16

Appendix

Notices .......................................................................................................A-1

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x Industrial Motherboard

2 x SATA 6G cable

1 x I/O Shield

1 x COM port cable

1 x Support CD

If any of the above items is damaged or missing, contact your distributor or

sales representative immediately.

1.2 Features

• Intel

®

Socket 1150 for 4th Generation Core™ i7/Core™ i5 / Core™ i3,

Pentium

®

,Celeron

®

Processors

• Four 240-pin Dual Channel DDR3 1600/1333MHz DIMMs up to 32GB

• Dual Intel

®

Giga LAN, PHY I217LM LAN (supports Intel

®

AMT 9.0)

• SATA 6.0 Gb/s x 5 (RAID 0/1/5/10 support, Half-size Minicard (PCIe + USB) x1

(or m-SATA optional), USB3.0 x 4, USB2.0 x 8, COM x 6

• PCI-Express 3.0/2.0 [x16] x 1, PCI-Express [x4] x 1, PCI x 2

• EuP/ErP Compliance

Chapter 1

Product overview

IMBM-Q87A

1-2

1.3 Specications

SYSTEM

Form factor

micro ATX

CPU

LGA1150 socket for Intel

®

4th Generation Core™ i7 / Core™ i5 /

Core™ i3, Pentium

®

,Celeron

®

processors

Supports Intel

®

22nm CPU

Supports Intel

®

Turbo Boost Technology 2.0*

*Intel

®

Turbo Boost Technology 2.0 support depends on the CPU types.

Memory

4 x DIMM (8GB per DIMM), max. 32GB, unbuffered, non-ECC

DDR3 1600 / 1333 MHz

Dual-channel memory architecture

Chipset

Intel

®

Q87 Express Chipset

I/O Chipset

Nuvoton NCT6791D

Fintek F81216HD

Ethernet

1 x Intel

®

PHY I217LM Gigabit LAN (Supports Intel

®

AMT 9.0)

1 x Intel

®

I210AT Gigabit LAN

BIOS

128Mbit Flash AMI BIOS ROM

Wake on LAN

Yes (WOL/PXE)

Watchdog Timer

1~255 steps by software program

TPM

Yes

H/W Status Monitor

Monitors CPU/Chassis temperature

Monitors Vcore/5V/12V voltages

Monitors CPU/Chassis fan speed

Smart Fan Control

CPU Fan/Chassis Fan x2

Power State

S3, S4, S5

Expansion slot

1 x PCI Express 3.0/2.0 x16 slot

1 x PCI Express x4 slot

2 x PCI

1 x Half-size Minicard (PCIe +USB) or mSATA optional

Battery

Lithium battery

Power requirement

1 x 24-pin ATX connector

1 x 4-pin ATX 12V power connector

Board size

9.6 in. x 9.6 in. (244 mm x 244 mm)

Gross weight

1.76 lb (0.8 Kg)

Operating

temperature

32

o

F~140

o

F (0

o

C~60

o

C)

Storage temperature

-40

o

F~185

o

F (-40

o

C~85

o

C)

Operating humidity

0%~90% relative humidity, non-condensing

Power compliance

Compliant with Eup/ErP

Certicate

CE/FCC

(continued on the next page)

1-3

Chapter 1: General information

DISPLAY

Chipset

Intel

®

Graphics Media Accelerator

Resolution

Up to 1920x1200@60Hz for VGA

Up to 1920x1200@60Hz for DVI

Up to 2560x1440@60Hz for Display Port

Output interface

DVI-D+DP, DP+DP, VGA+DVI-D, VGA+DP, DVI-D+DP+DP, VGA+DP+DP

I/O

Storage

5 x SATA 6.0Gb/s ports

RAID 0 / 1 / 5 / 10 support

Serial port

1 x RS-232/422/485 supports 5V/12V/RI on rear IO

5 x RS-232 header on mid-board

USB

4 x USB3.0 (4 ports at rear panel)

8 x USB2.0 ports, (2 ports at mid-board, 6 ports at rear panel)

Fan

1 x CPU Fan connector (4-pin)

2 x Chassis Fan connectors (4-pin)

RTC

Internal RTC

Keyboard/Mouse

1 x PS/2 Keyboard / mouse combo port on rear I/O

Audio

Realtek ALC887,Mic-in/Line-in/ Line-out

Ethernet

2 x RJ-45 ports on rear I/O

Display

1 x VGA connector on mid-board

1 x DV-D port on rear I/O

2 x DisplayPort

Others

1 x 8-bit Digital I/O (In/Out programmable)

IMBM-Q87A

1-4

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplugthepowercordfromthewallsocketbeforetouchingany

component.

• Beforehandlingcomponents,useagroundedwriststraportouchasafely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.

• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic

pad or in the bag that came with the component.

• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, or components.

IMBM-Q87A

2-2

PCIEX16_1

PCI1

PCI2

DIO1

PCIEX4_1

EATX_PWR1

CHA_FAN1

CPU_FAN1

CHA_FAN2

BZ1

ASM

1083

KBMS

_USB1213

USB5678

SB_PWR2

SB_PWR1

CLRTC

CHASSIS1

DIS_ME

24.4cm(9.6in)

Intel

®

Q87

Intel

®

PHY

I217LM

Intel

®

I210AT

DDR3 DIMM_A1 (64bit, z240-pin module)

DDR3 DIMM_A2 (64bit, 240-pin module)

DDR3 DIMM_B1 (64bit, z240-pin module)

DDR3 DIMM_B2 (64bit, 240-pin module)

USB910

AUDIO1

LAN2_USB3_34

LAN1_USB3_12

TPM1

COM1_V1

DVI_D1

VGA

DP1

LGA1150

F_PANEL1

COM4COM5COM6 COM3

COM1

COM2

ASM

1442

EATX_PWR2

BATTERY

Nuvoton

NCT6791D

ALC

887

MINI_CARD1

SATA6G_1

SATA6G_2

SATA6G_3

SATA6G_4

SATA6G_5

321 34 5 6

910111214 13321516

2

1

8

7

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place eight screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION! Do not overtighten the screws! Doing so can damage the

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/LEDs Page

1.

ATX power connectors (24-pin EATXPWR1, 8-pin EATX_PWR2) 2-18

2.

Serial port connectors (10-1 pin COM1~6) 2-21

3.

CPU and system fan connectors (4-pin CPU_FAN1, 4-pin CHA_FAN1~2) 2-19

4.

Intel

®

LGA1150 CPU socket

2-6

5.

DIMM memory slots 2-11

6. Standby Power LED (SB_PWR1~2) 2-15

7. Minicard connector (MINICARD) 2-19

8.

Intel

®

ME Jumper (3-pin DIS_ME)

2-14

9. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6) 2-21

10. System panel connector (10-1 pin F_PANEL1) 2-20

11. Chassis intrusion connector (4-1 pin CHASSIS) 2-22

12. Clear RTC RAM (CLRTC) 2-13

13. COM1 VSET connector (COM1_V1) 2-14

14. USB 2.0 connectors (10-1 pin USB910) 2-22

15. TPM connector (20-1 pin TPM1) 2-18

16. Digital I/O connector (10-pin DIO1) 2-20

IMBM-Q87A

2-4

2.3 Screw size

2.3.1 Component side

2-5

Chapter 2: Motherboard information

2.3.2 Solder side

IMBM-Q87A

2-6

IMPORTANT: Unplug all power cables before installing the CPU.

CAUTION!

• Uponpurchaseofthemotherboard,ensurethatthePnPcapison

the socket and the socket contacts are not bent. Contact your retailer

immediately if the PnP cap is missing, or if you see any damage to the

PnP cap/socket contacts/motherboard components. The manufacturer will

shoulder the cost of repair only if the damage is shipment/transit-related.

• Keepthecapafterinstallingthemotherboard.Themanufacturerwill

process Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the LGA1150 socket.

• Theproductwarrantydoesnotcoverdamagetothesocketcontacts

resulting from incorrect CPU installation/removal, or misplacement/loss/

incorrect removal of the PnP cap.

2.4 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1150 socket designed for the

Intel® 4th Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium®, Celeron®

processors.

IMBM-Q87A CPU socket LGA1150

2-7

Chapter 2: Motherboard information

2.4.1 Installing the CPU

1

A

B

2 3

CAUTION! Ensure that you install the correct CPU designed for LGA 1150

only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on

the LGA1150 socket.

IMBM-Q87A

2-8

A

B

C

4

5

2-9

Chapter 2: Motherboard information

2.4.2 CPU heatsink and fan assembly installation

CAUTION! Apply the Thermal

Interface Material to the CPU

heatsink and CPU before you

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

B

A

B

1

2

3 4

IMBM-Q87A

2-10

A

B

A

To uninstall the CPU heatsink and fan assembly

2

1

2-11

Chapter 2: Motherboard information

2.5 System memory

This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Module

(DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but

is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are

developed for better performance with less power consumption.

ThegurebelowillustratesthelocationoftheDDR3DIMMsockets:

IMBM-Q87A 240-pin DDR3 DIMM sockets

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

IMBM-Q87A

2-12

2.5.1 Installing a DIMM

To remove a DIMM

1

2

3

A

B

Page is loading ...

Aaeon IMBM-Q87A User manual

Aaeon IMBM-Q87A User manual

Related papers

Other documents