Aaeon IMBM-H110A User manual

Industrial Motherboard

IMBM-H110A

ii

E15316

Revised Edition v2

March 2019

Copyright Notice

This document is copyrighted, 2019. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products described

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to

change without notice. While reasonable efforts have been made in the preparation

of this document to assure its accuracy, the original manufacturer assumes no

liabilities resulting from errors or omissions in this document, or from the use of the

information contained herein.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• AMI is a trademark of American Megatrends Inc.

• Intel

®

, Core™ are trademarks of Intel® Corporation.

• Microsoft Windows

®

is a registered trademark of Microsoft Corp.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

iii

Contents

Chapter 1 Product overview

1.1 Package contents......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specifications ............................................................................... 1-2

Chapter 2 Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Screw size ..................................................................................... 2-4

2.3.1 Component side .............................................................. 2-4

2.3.2 Solder side ...................................................................... 2-5

2.4 Central Processing Unit (CPU) ................................................... 2-6

2.4.1 Installing the CPU ........................................................... 2-7

2.4.2 CPU heatsink and fan assembly installation ................... 2-9

2.5 System memory ......................................................................... 2-11

2.5.1 Installing a DIMM .......................................................... 2-12

2.6 Jumpers ...................................................................................... 2-13

2.7 Onboard LEDs ............................................................................ 2-16

2.8 Connectors ................................................................................. 2-17

2.8.1 Rear panel connectors .................................................. 2-17

2.8.2 Internal connectors ....................................................... 2-19

Chapter 3 BIOS setup

3.1 BIOS setup program .................................................................... 3-1

3.1.1 BIOS menu screen .......................................................... 3-2

3.1.2 Menu bar ......................................................................... 3-2

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-3

3.3.1 CPUConguration .......................................................... 3-3

3.3.2 Trusted Computing ......................................................... 3-3

3.3.3 SATAConguration ........................................................ 3-5

3.3.4 OffboardSATAControllerConguration ......................... 3-5

3.3.5 PCH-FWConguration ................................................... 3-6

iv

3.3.6 SIOConguration ........................................................... 3-6

3.3.7 NCT6791D HW Monitor .................................................. 3-8

3.3.8 USBConguration ........................................................ 3-13

3.3.9 DigitalIOPortConguration ......................................... 3-13

3.3.10 Power Management ...................................................... 3-13

3.4 Chipset menu ............................................................................. 3-15

3.4.1 SystemAgent(SA)Conguration ................................. 3-15

PCH-IOConguration .................................................................. 3-15

3.5 Security menu ............................................................................ 3-16

3.5.1 Administrator Password ................................................ 3-16

3.5.2 User Password .............................................................. 3-16

3.6 Boot menu .................................................................................. 3-17

3.6.1 BootConguration ........................................................ 3-17

3.6.2 Boot Option Priorities .................................................... 3-17

3.7 Save & Exit menu ....................................................................... 3-18

Appendix

Notices .......................................................................................................A-1

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x Industrial Motherboard 1 x SATA 6.0 Gb/s cable (2 in 1 pack)

1 x I/O Shield 1 x Support DVD

1 x COM port cable

If any of the above items is damaged or missing, contact your distributor or

sales representative immediately.

1.2 Features

• Intel

®

Socket 1151 for 7th/6th Generation (Kaby Lake-S/Skylate-S) Core™ i7 /

Core™ i5 / Core™ i3, Pentium

®

, Celeron

TM

14nm Processor

• Two DIMMs support Dual Channel DDR4 2400*/2133/1867 MHz Non-ECC,

Un-buffered memory up to 32GB

• 2 x Intel

®

i211AT Giga LAN, RJ45 x 2

• 5 x SATA III (6.0Gb/s) ports (1 port via ASM1061; PCIe 2.0), 1 x M.2 M key (22

x 42mm)

• 1 x PCIe 3.0/2.0 [x16] Slot, 2 x PCIe 2.0 [x1] Slot (open edge), 1 x PCI, 1 x M.2

M key (22 x 42mm) for SATA (via ASM1061; PCIe 2.0)

Chapter 1

Product overview

IMBM-H110A

1-2

1.3 Specifications

SYSTEM

Form factor

Micro-ATX Form Factor, 9.6”x9.6” (244mmx244mm)

CPU

Intel® 7th/ 6th Generation(Kaby Lake-S/ Skylake-S) Core™ i7/i5/i3/

Pentium®/Celeron® LGA1151 Socket Processor

Supports Intel

®

14nm CPU

Memory

2 x DIMM, DDR4 (2400*/2133/1867 MHz, max. 32GB)

non-ECC, un-buffered memory

Dual-channel memory architecture

Chipset

Intel

®

H110 Express Chipset

I/O Chipset

NCT6791D+ F81216HD

Ethernet

2 x Intel® i211AT Giga LAN, RJ45 x 2

BIOS

1 x 128Mbit Flash ROM, AMI BIOS, Add Buffer IC

Wake on LAN

Yes (WOL/PXE)

Watchdog Timer

1~255 steps by software program

TPM

Nuvoton NPCT650ABBYX TPM2.0 onboard (option)

H/W Status Monitor

Monitors CPU/Chassis temperature

Monitors Vcore/5V/3.3V/12V voltages

Monitors CPU/Chassis fan speed

Smart Fan Control

CPU Fan / Chassis Fan x 2

Power State

S3, S4, S5

Expansion slot

1 x PCIe 3.0 [x16] slot

2 x PCIe 2.0 [x1] slots

1 x PCI

1 x M.2 M key (22 x 42mm) for SATA (via ASM1061; PCIe 2.0)

Battery

Lithium battery

Power requirement

1 x 24-pin ATX connector

1 x 8-pin (2x4) ATX 12V Power connector

Form factor

Micro-ATX Form Factor, 9.6”x9.6” (244mmx244mm)

Gross weight

1.76 lb (0.8 Kg)

Operating

temperature

32

o

F~140

o

F (0

o

C~60

o

C)

Storage temperature

-40

o

F~185

o

F (-40

o

C~85

o

C)

Operating humidity

0%~90% relative humidity, non-condensing

Certificate

CE/FCC

(continued on the next page)

1-3

Chapter 1: General information

DISPLAY

Chipset

Intel

®

Graphics Media Accelerator, VGA support via RTD2168

Resolution

Up to 1920 x 1200 @60Hz (via RTD2168) for VGA

Up to 1920 x 1200 @60Hz for DVI-D

Up to 4096 x 2304 @24Hz for HDMI

Output interface

VGA + DVI-D + 2 * HDMI

I/O

Storage

5 x SATA III (6.0Gb/s) ports (1 port via ASM1061; PCIe 2.0)

1 x M.2 M key (22 x 42mm)

Serial port

1 x RS-232/422/485 (COM1, supports 5V/12V/RI optional)

USB

4 x USB 3.0 ports

Fan

1 x CPU Fan connector(s) (4-pin)

2 x Chassis Fan connectors (4-pin)

RTC

Internal RTC

Keyboard/Mouse

1 x PS/2 stack Port (Keyboard & Mouse)

Audio

3 x Audio Jack: Line-in, Mic-in, Line-out

Ethernet

2 x RJ-45 ports

Display

1 x DVI-D

1 x VGA

2 x HDMI

Others

1 x Front panel header

1 x Clear CMOS jumper

1 x AT/ATX mode select jumper

1 x Chassis Intrusion

IMBM-H110A

1-4

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplugthepowercordfromthewallsocketbeforetouchingany

component.

• Beforehandlingcomponents,useagroundedwriststraportouchasafely

groundedobjectorametalobject,suchasthepowersupplycase,toavoid

damaging them due to static electricity.

• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.

• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic

pad or in the bag that came with the component.

• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower

supply is switched off or the power cord is detached from the power

supply.Failuretodosomaycauseseveredamagetothemotherboard,

peripherals,orcomponents.

IMBM-H110A

2-2

IMBM-H110A

PCIEX16_1

M2_M

M2_HOLD_42

PCIEX1_1

PCIEX1_2

PCI1

F_PANEL1

CLRTC1

AT_ATX

CHASSIS1

USB2_910 USB2_56USB2_78

EATX_PWR1

CPU_FAN1

CHA_FAN1

CHA_FAN2

BATTERY

Super

I/O

Super

I/O

ASM

1083

ALC

887

Intel

I211AT

Intel

I211AT

COM1_V1

J2

J1

J4

J3

ASM

1442K

ASM

1442K

ASM

1442K

RTD

2168

LGA1151

Intel

®

H110

DDR4 DIMM_A1 (64bit, 288-pin module)

DDR4 DIMM_B1 (64bit, 288-pin module)

SATA6G_5SATA6G_4

SATA6G_2

SPI_1

SATA6G_3SATA6G_1

BUZZER1

AUDIO1

KBMS

LAN_USB3_34

LAN1_USB3_12

24.4cm(9.6in)

128Mb

BIOS

EATX_PWR2

DVI_D

VGA

COM1

HDMI2 HDMI1

24.4cm(9.6in)

COM3COM4

COM2

COM5COM6

DIO1

AMP_CON

LED_5VSB LED_5V

5 42 431 6 7

8

2

14

10

12

11

9

134151681718

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place eight screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION!Donotovertightenthescrews!Doingsocandamagethe

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/LEDs Page

1.

COM1RS422/RS485terminator(2-pinJ1/J2/J3/J4) 2-15

2. ATXpowerconnectors(24-pinEATXPWR1,8-pinEATX_PWR2) 2-19

3. COM1Ring/+5V/+12Vselection(COM1_V1) 2-14

4. CPUandsystemfanconnectors(4-pinCPU_FAN1,4-pinCHA_FAN1~2) 2-20

5. Intel

®

LGA1151CPUsocket 2-6

6. M.2M-key2242socket 2-22

7. DIMMmemoryslots 2-11

8. Serialportconnectors(10-1pinCOM2~6) 2-22

9. StandbypowerLEDs(LED_5V,LED_5VSB) 2-16

10. BIOSprogrammableconnector(8-pinSPI_1) 2-19

11. Chassisintrusionconnector(4-1pinCHASSIS) 2-14

12. SerialATA6.0Gb/sconnectors(7-pinSATA6G_1~5) 2-23

13. Systempanelconnector(10-pinF_PANEL) 2-21

14. USB2.0connector(10-1pinUSB56,USB78andUSB910) 2-23

15. ClearRTCRAM(CLRTC) 2-13

16. AT/ATXmodejumper(3-pinATMODE) 2-15

17. DigitalI/Oconnector(10-pinDIO1) 2-20

18.. Audioamplierconnector(4-pinAMP_CON) 2-24

IMBM-H110A

2-4

2.3 Screw size

2.3.1 Component side

243.84

11.03

32.10

33.30

53.17

84.36

70.51

150.13

80.52

35.67

40.24

10.12

140.84

161.01

181.33

201.65

219.41

240.01

240.28

239.65

83.03

5.46

19.64

27.05

48.13

69.22

90.30

148.96

177.38

199.39

210.97

193.42

132.37

152.37

196.25

238.36

233.43

238.89

239.78

216.79

239.78

239.17

48.35

106.44

127.94

0.00

7.36

10.75

16.68

8.50

18.74

10.49

7.14

45.45

41.28

38.10

40.77

44.58

68.15

126.81

72.01

147.07

179.94

199.24

240.28

243.84

138.81

163.20

232.96

228.07

211.06

194.04

218.97

201.95

177.67

178.44

173.23

149.23

140.97

126.24

43.75

33.30

59.94

77.85

86.87

103.38

127.13

0.00

35.02

9.74

27.35

38.84

48.42

80.04

109.94

131.44

150.13

243.84

0.00

2-5

Chapter 2: Motherboard information

2.3.2 Solder side

243.84

10.16

33.02

89.31

108.81

126.81

144.81

165.10

164.31

237.49

6.35

163.83

46.14

121.15

57.22

118.24

209.55

163.83

229.87

6.35

46.14

57.22

121.15

0.00

IMBM-H110A

2-6

IMPORTANT:UnplugallpowercablesbeforeinstallingtheCPU.

CAUTION!

• Uponpurchaseofthemotherboard,ensurethatthePnPcapison

thesocketandthesocketcontactsarenotbent.Contactyourretailer

immediatelyifthePnPcapismissing,orifyouseeanydamagetothe

PnPcap/socketcontacts/motherboardcomponents.Themanufacturerwill

shoulderthecostofrepaironlyifthedamageisshipment/transit-related.

• Keepthecapafterinstallingthemotherboard.Themanufacturerwill

processReturnMerchandiseAuthorization(RMA)requestsonlyifthe

motherboardcomeswiththecapontheLGA1151socket.

• Theproductwarrantydoesnotcoverdamagetothesocketcontacts

resultingfromincorrectCPUinstallation/removal,ormisplacement/loss/

incorrectremovalofthePnPcap.

2.4 Central Processing Unit (CPU)

ThemotherboardcomeswithasurfacemountLGA1151socketdesignedforthe

Intel®7th/6thGeneration(KabyLake-S/Skylake-S)Core™i7/Core™i5/Core™

i3,Pentium®andCeleron®14nmprocessors.

IMBM-H110A

IMBM-H110A CPU socket LGA1151

2-7

Chapter 2: Motherboard information

2.4.1 Installing the CPU

1

A

B

2 3

CAUTION! EnsurethatyouinstallthecorrectCPUdesignedforLGA1151

only.DONOTinstallaCPUdesignedforLGA1155andLGA1156socketson

theLGA1151socket.

IMBM-H110A

2-8

A

B

C

4

5

2-9

Chapter 2: Motherboard information

2.4.2 CPU heatsink and fan assembly installation

CAUTION!ApplytheThermal

InterfaceMaterialtotheCPU

heatsinkandCPUbeforeyou

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

B

A

B

1

2

3 4

IMBM-H110A

2-10

A

B

A

To uninstall the CPU heatsink and fan assembly

2

1

2-11

Chapter 2: Motherboard information

2.5 System memory

ThismotherboardcomeswithtwoDoubleDataRate4(DDR4)DualInlineMemoryModule

(DIMM)sockets.ADDR4moduleisnotcheddifferentlyfromaDDR,DDR2,orDDR3module.

DONOTinstallaDDR,DDR2,orDDR3memorymoduletotheDDR4slot.

AccordingtoIntel

®

CPUspec,DIMMvoltagebelow1.2Visrecommendedtoprotectthe

CPU.

IMBM-H110A

IMBM-H110A 288-pin DDR4 DIMM sockets

DIMM_A1

DIMM_B1

IMBM-H110A

2-12

2.5.1 Installing a DIMM

To remove a DIMM

A

B

1

2

3

Page is loading ...

Aaeon IMBM-H110A User manual

Aaeon IMBM-H110A User manual

Related papers

Other documents