Hitachi Printers Getting Started Manual

Brand: Hitachi

Model: Printers

Type: Getting Started Manual

This manual is also suitable for

Hitachi Printers

Below you will find brief product information for Hitachi Printers. This information will provide you with an overview of the features and capabilities of your new device.

Hitachi Printers are high-quality, reliable printers that are perfect for a variety of applications. They offer a wide range of features, including:

High-resolution printing
Fast print speeds
Duplex printing
Network connectivity
Wireless printing

With their advanced features, Hitachi Printers can help you to improve your productivity and efficiency. They are ideal for use in homes, offices, and schools.

Hitachi Printers

Below you will find brief product information for Hitachi Printers. This information will provide you with an overview of the features and capabilities of your new device.

Hitachi Printers are high-quality, reliable printers that are perfect for a variety of applications. They offer a wide range of features, including:

High-resolution printing
Fast print speeds
Duplex printing
Network connectivity
Wireless printing

With their advanced features, Hitachi Printers can help you to improve your productivity and efficiency. They are ideal for use in homes, offices, and schools.

Getting Started

Imaging Solutions, Inc.

1757 Tapo Canyon Rd.

Simi Valley, CA 93063

March 1999

335841-002 Revision B

No part of this document may be reproduced without the expressed permission of

Hitachi Koki Imaging Solutions, Inc.

The material in this document is for informational purposes and is subject to change

without notice. Hitachi Koki Imaging Solutions, Inc., assumes no responsibility for

errors or omissions in this document. No liability is assumed for any damages

resulting from the use of the information it contains.

TRADEMARK

Hitachi Koki Imaging Solutions, Inc., Digital Document Server, DDS, DDS 32, DDS

40, DDS 32/40, ScanCenter, and their associated logo marks, are trademarks of

Hitachi Koki Imaging Solutions, Inc.

NOTICE TO USER

In an effort to meet the demands of a rapidly changing technology, the manufacturer

is continually developing new features and functions to meet your changing printing

or printer needs. As a result, this manual may not exactly reflect future changes made

to the product. Please be sure to consult all manual updates or addenda when using

this product’s documentation.

Preface i

Preface

What This Manual Contains

■ Chapter 1 (Unpacking and Setup) shows how to unpack the

ScanCenter, how to attach the necessary cables and power cord, and

provides power up instructions.

■ Appendix A (Safety Information) provides safety, certification, and

environmental information.

Related Documentation

■ ScanCenter User’s Guide

■ ScanCenter Quick Reference Guide

■ ScanCenter Service Manual

■ Digital Document Server User’s Guide

■ ScanCenter Illustrated Parts List

ii Preface

Contents iii

Contents

What This Manual Contains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Customer Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

1-1

Chapter 1. Unpacking and Setup

Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1

Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1

Unpacking the Scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Shipaway Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Scanner Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4

Rear View Without Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5

Attaching the Cables and Power Cord to the Scanner . . . . . . . . . . . . . . . .1-5

Attaching the Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Attaching the Cables and Power Cord to the Printer . . . . . . . . . . . . . . . . . 1-9

Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

A-1

Appendix A. Safety Information

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Canadian Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

CE Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

Environmental Limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Contents iv

Unpacking and Setup 1-1

Chapter 1

Unpacking and Setup

Before You Begin

Set up of the printer must be complete before you begin to set up the

scanner.

Selecting a Location

The scanner must be located on a flat, stable surface near the printer. This

can be a table or desk, or it can be the optional ScanCenter Stand. Whatever

the location, be sure it is cleared and ready before you begin to unpack the

scanner.

CAUTION

The printer is not designed to support the scanner. Do not

attempt to set up the scanner on top of the printer.

NOTE

If you are using the optional ScanCenter Stand, you will need to

assemble it first. Assembly instructions are included with the

ScanCenter Stand.

1-2 Unpacking and Setup

Unpacking the Scanner

Follow these instructions for unpacking the scanner. The packing

arrangement is illustrated in the figure below.

1. Open the box.

2. Lift up and remove the left, right, and front packaging foam.

3. Lift up and remove the shipaway kit packaging.

4. Reach under the scanner, lift it out of the box and place it in the

location you have prepared for it.

5. Place all of the packaging foam back in the box and save it for use in

case you have to ship the scanner to another location.

WARNING!

The scanner weighs approximately 55 lb. Two people must be

available to lift the scanner from the box.

Left and Right

Front Packaging Foam

Shipaway Kit

Packaging

Bottom

Packaging Foam

Unpacking and Setup 1-3

Shipaway Kit Contents

You will need the following items from the shipaway kit to set up the

scanner:

■ Shroud

■ Standoffs (2 ea.)

■ Tie Wrap (1 ea.)

■ Printer Cable

■ Power Cord (USA and Europe only)

1-4 Unpacking and Setup

Scanner Components

Rear View Without Shroud

ADF

Exit Table Extension

Document Table

Document

ADF Cover

Indicator

Support Wire

Guides

OCP

Cable Cover

Power

Scanner Indicator Lamps

Exit Table

Switch

Lamps

Power Plug Inlet

Image Processing

Reset Switch

SCSI ID Rotary Switch

DIP Switches

SCSI Connectors

(Do Not Use)

Printer Connector

OCP Cable

Board

Unpacking and Setup 1-5

Installation Instructions

Perform the following steps to install the scanner:

1. Place the scanner on a table or desktop not more than 6 feet from the

printer.

Place the scanner on the optional ScanCenter Stand with the two left

feet of the scanner in the cutouts on the left side of the tray.

Attaching the Cables and Power Cord to the Scanner

Attach the cables to the scanner as follows:

1. Locate the Operator Control Panel (OCP) cable that is taped to the

side of the scanner and plug it into the OCP connector as shown in

the illustration on the following page.

2. Plug in the printer cable into the printer cable connector as shown in

the illustration on the following page.

WARNING!

When using the optional ScanCenter Stand, do not place the scanner on

the stand until the printer is in place and the entire unit is in the desired

location.

Do not move the stand when the scanner is on the tray. Always take the

scanner off of the stand when moving.

WARNUNG

Wenn Sie das optionale ScanCenter-Gestell verwenden, stellen Sie den

Scanner nicht darauf, bis der Drucker in seine Position gebracht ist und

sich die gesamte Geräteeinheit an der gewünschten Stelle befindet.

Verschieben Sie das Gestell nicht, wenn der Scanner darauf steht. Nehmen

Sie stets den Scanner herunter, bevor Sie das Gestell verschieben.

1-6 Unpacking and Setup

3. Plug in the power cord as shown below.

OCP Cable

Printer Cable

Power Cord

OCP Connector

Printer Cable Connector

Unpacking and Setup 1-7

Attaching the Shroud

A shroud is attached to the scanner to protect the cables from coming loose

and to provide a clean, finished appearance to the unit.

To attach the shroud:

1. Unscrew the thumbscrews from the I/O plate and set them aside for

later use.

2. Replace the thumbscrews with the standoffs.

Thumbscrews (2)

Standoffs (2)

1-8 Unpacking and Setup

3. The power cord and the printer cable will be routed through an

opening in the side of the shroud as it is installed. To ensure the

printer cable stays connected, use the tie wrap to fasten the cable to

the left standoff.

4. Mount the shroud onto the scanner.

5. Secure the shroud using the thumbscrews you removed in Step 1.

WARNING!

Never use the shroud as a handle for picking up the scanner.

Tie Wrap

Unpacking and Setup 1-9

Attaching the Cables and Power Cord to the Printer

1. If you are using the ScanCenter Stand, route the power cord and the

printer cable down the back of the stand and secure them with the

cable clamp.

2. Connect the printer cable to the printer interface where indicated

below.

3. Plug the power cord into the wall outlet.

Printer Cable from Scanner

Printer Interface

1-10 Unpacking and Setup

Power Up

To turn the power on, press the switch on the front of the scanner. A green

LED will light on the front of the scanner and the touch panel will display

a screen indicating the diagnostics are being run. When the diagnostics are

complete (about 2 minutes), the touch panel will display the Job Status

Screen.

If the LED does not light, or the diagnostics fail, call technical support.

Power

Scanner Indicator LED

Switch

Safety Information A-1

Appendix A

Safety Information

General

■ For the safety of the personnel and the product, operate the equipment

according to the instructions in this user’s guide. The manufacturer

will not be responsible for any problems or damage that arise from

improper use.

Certifications

FCC Notice

This equipment has been tested and found to comply with the limits for a

Class A digital device pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equip-

ment generates, uses, and can radiate radio frequency energy and, if not in-

stalled and used in accordance with this user’s guide, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference. If this occurs, users

are required to correct the interference at their own expense.

Use of shielded cables is required to comply with Class A limits in Subpart

B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment other than

those specified in this user’s guide.

You may find the following booklet prepared by the Federal Communica-

tions Commission helpful: How to Identify and Resolve Radio - TV Inter-

ference Problems. This booklet is available from the U.S. Government

Printing Office, Washington, D.C. 20402, Stock No. 004-000-00345-4.

NOTE

Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

A-2 Safety Information

Canadian Certification

This Class A digital apparatus meets all requirements of the Canadian In-

terference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du

Règiement sur le matériel broilleur du Canada.

Declaration of Conformity

Application of Council Directive(s):

Standard(s) to which the Conformity is Declared:

Manufacturer’s Name:

Manufacturer’s Address:

Type of Equipment:

Model No.:

The equipment specified above conforms to the Directives and

to the Standards referenced above.

Hitachi Koki Imaging Solutions, Inc.

Simi Valley,

California

USA

September 1998

73/23/EEC, 89/336/EEC

EN60950, EN55022 Class A,

EN50082-1

Hitachi Koki Imaging Solutions, Inc.

1757 Tapo Canyon Rd.,

Simi Valley, CA 93063

USA

Scanner

SC1

Safety Information A-3

CE Notice

This equipment has been tested and found to comply with the limits for a

class A Information Technology Equipment in accordance with the Euro-

pean Standard EN55022.

These limits are designed to provide reasonable protection against

unacceptable interference in either commercial or industrial environments.

This equipment generates, uses, and can radiate radio signals and if it is not

installed and used in accordance with the instructions detailed in this user’s

guide, it may cause unacceptable interference to radio communication

installations and equipment. The operation of this equipment in a

residential area is likely to cause unacceptable interference in which case

you may be required to correct the source of the interference at your own

expense.

In order to maintain compliance to the class A regulations, shielded cables

must be used with this equipment. Operation of this equipment without

shielded cables is likely to cause interference to radio and television re-

ceivers thereby degrading their reception.

Please be aware that changes and modifications made to the equipment

without prior approval of the manufacturer could negate your permission

to operate the equipment.

A-4 Safety Information

Precautions

■ Read all of these instructions and keep them for later use.

■ Follow all warnings and instructions marked on the device.

■ Unplug this device from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

■ Do not use this device near water.

■ Do not place this device on an unstable cart, stand, or table. The

device could fall and suffer serious damage.

■ Slots and openings in the cabinet and the back or bottom are provided

for ventilation. To ensure reliable operation of the device and protect

it from overheating, these openings must not be blocked or covered.

The openings should never be blocked by placing the device on a

bed, sofa, rug, or other similar surface. This device should never be

placed near or over a radiator or heat register. This device should not

be placed in a built-in installation unless proper ventilation is pro-

vided.

■ This device should be operated from the type of power source indi-

cated on the marking label. If you are not sure of the type of power

available, contact your dealer or local power company.

■ This product is equipped with a 3-wire grounding-type plug, a plug

having a third (grounding) pin. This plug will only fit into a ground-

ing-type outlet. This is a safety feature. If you are unable to insert the

plug into the outlet, contact your electrician to replace your outlet. Do

not defeat the purpose of the grounding-type plug by removing its

grounding pin. (This does not apply in countries in which a 2-wire,

non-grounded type of plug is used.)

■ Do not place this device where the cord will be walked on.

■ If an extension cord is used with this product, make sure that the total

of the ampere ratings on the devices plugged into the extension cord

does not exceed the extension cord ampere rating. Also, make sure

that the total of all devices plugged into the wall outlet does not

exceed 15 amperes.

Page is loading ...

Hitachi Printers Getting Started Manual

Brand: Hitachi

Model: Printers

Type: Getting Started Manual

This manual is also suitable for

Hitachi Printers

Below you will find brief product information for Hitachi Printers. This information will provide you with an overview of the features and capabilities of your new device.

Hitachi Printers are high-quality, reliable printers that are perfect for a variety of applications. They offer a wide range of features, including:

High-resolution printing
Fast print speeds
Duplex printing
Network connectivity
Wireless printing

With their advanced features, Hitachi Printers can help you to improve your productivity and efficiency. They are ideal for use in homes, offices, and schools.

Download PDF

report

Hitachi Printers Getting Started Manual

This manual is also suitable for

Hitachi Printers Getting Started Manual

Related papers

Other documents