Quick Start Guide
Get the Tapo app from the App Store or
Google Play.
1. Download Tapo App
2. Power Up & Set Up
Follow the instructions in the Tapo app
to complete the installation and setup.
Getting Started
OR
Setup Videos
Scan QR Code or visit
https://www.tp-link.com/support/
setup-video/#smart-bulbs
Need some help?
Visit https://www.tapo.com/support/
for User Guides, FAQs, Warranty & more
?
• Do not use the device where wireless devices are not allowed.
• Keep the device away from water, re, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
• Only use the control provided with or specied by these instructions to
control this lamp. This lamp will not operate properly when connected to a
standard (incandescent) dimmer or dimming control.
• NOT FOR EMERGENCY LIGHTING.
Please read and follow the above safety information when operating the
device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at
your own risk.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
7106510131 REV1.2.0 © 2023 TP-Link
Safety Information
/
