1
Installation Instructions for
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
Install the shade to the fixture base and secure it using the washers and cap screws.
1
2
1A
Marteau 1 Light Wall
1.0
W 1782B
W 1782B
Wall
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
1
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
CAP SCREW
WASHER
LAMP
3
2
3
FIXTURE
BASE