2. Generation Lighting
  3. 4000501-748
4000501-748

Generation Lighting 4000501-748 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Generation Lighting 4000501-748 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation Instructions for
1Light Wall
1.0
4000501
4000501
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the
hazards involved.
Use minimum 90°c supply conductors.
SAVETHESE INSTRUCTIONS!
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent
dimmer. version may be dimmed with a dimmer. ConsultLED LED
lamp manufacturer for additional information.
This instruction shows a typical installation.
Install the Fixture
2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the fixture base onto the mounting studs, and secure it in place by screwing the cap
nuts onto the studs.
Install the candle tube by sliding it over the socket.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
6
7
JUNCTION BOX
MOUNTING PLATE
MOUNTING STUD
SOCKET
CANDLE TUBE
LAMP
7
4
3
CAP NUT
/