Enclume CWS6 W/BOARDS Installation guide

Brand: Enclume

Model: CWS6 W/BOARDS

Type: Installation guide

Enclume CWS6 W/BOARDS is a heavy-duty storage rack designed to provide ample storage space in your kitchen or pantry. Constructed with durable steel uprights and adjustable shelves, it offers a sturdy and customizable storage solution. The included felt pads protect your floors from scratches, and the two 5/32” Hex Keys allow for easy assembly. With its versatile design, this rack can be used to store cookware, utensils, spices, and other kitchen essentials, helping you keep your space organized and clutter-free.

CWS6kd-Cookware Stand – Knock Down

Enclosed you will find everything needed for the assembly and use of your

storage rack. Two people make assembly and installation easier.

The parts and hardware included are:

Hardware included: Components included:

18 – Barrel Bolt – Open End half, #10-24 x 7/16” 3 – Uprights

18 – Barrel Screw – Screw Head half, #10- 24 x 5/16” 6 – Sets of Shelves #1 - #6 (each set contains 3 shelf arms)

3 – Felt Pads

2 – 5/32” Hex Key

1) Place two of the three uprights on a firm surface with the angled ends both at one end. (NOTE: one upright should have the

angled tab facing up toward the ceiling, while the other upright tab is facing in the opposite direction.)

NOTE: Before attaching the shelves in the next steps, we recommend that you insert the barrel nuts and bolts all in the

same direction on the shelves and each upright for a uniform look.

2) Locate Shelf #6 (set of three) starting at the bottom of the rack. Using two of the three shelves, attach the two shelves by

inserting a barrel screw through the hole in one end of the shelf, through the upright and THROUGH THE HOLE IN THE

OTHER SHELF. Attach the 3 pieces making sure the upright is between the two shelves with the barrel bolts and screws.

Do NOT fully tighten at this time.

3) Using the third shelf of the set repeat Step #2 for the second upright.

4) Locate the third upright and attach to the remaining open ends of the shelf, as in Steps 2 and 3.

5) Repeat Steps 2-4 using the #1 set of shelves at the opposite end or top of the stand.

6) Your stand is ready to stand up.

7) Repeat Steps 2 – 5 for the remaining 4 sets of shelves.

8) Level rack and tighten TOP shelf first, then the bottom shelf. Finally, tighten all fasteners.

It is important that your rack is assembled correctly. If the unit is assembled or used incorrectly, it

could become unstable and collapse, possibly causing injury.

WARNING

Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall

be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the

warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St. , Port Hadlock, WA 98339, postage prepaid within 20

days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instruction) being provided to the customer

by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products