AIC SB202-LE User manual

UM_Lepus_v2.3_030519

Lepus

Server Motherboard

User's Manual

Contents

Table of Contents

Preface �� i

Safety Instructions �� ii

About This Manual �� iii

Chapter 1� Product Features ��1

1.1 Components .............................................................................................1

1.2 Specications ..........................................................................................2

1.3 Feature .....................................................................................................3

Chapter 2� Hardware Setup ��4

2.1 Central Processing Unit (CPU) ................................................................ 4

2.1.1 Processor Support ..............................................................................................4

2.1.2 Installing the CPU ...............................................................................................4

2.1.3 CPU Heatsink Installation ..................................................................................7

2.2 System Memory Setup ............................................................................8

2.2.1 DIMM Installation ...............................................................................................8

2.2.2 DIMM Location ...................................................................................................9

2.2.3 Dimm Slot Installation Order ..............................................................................9

Chapter 3� Motherboard Settings �� 10

3.1 Block Diagram ........................................................................................10

3.2 Content List ............................................................................................ 11

3.3 Layout .....................................................................................................13

3.4 Connector and Jumper ..........................................................................14

Chapter 4. BIOS Conguration Settings �� 16

4.1 Navigation Keys .....................................................................................16

4.2 BIOS Menu .............................................................................................17

4.3 Main ........................................................................................................ 18

4.3.1 Main .................................................................................................................. 18

4.4 Advanced ................................................................................................19

4.4.1 Trusted Computing .......................................................................................... 19

4.4.2 ACPI Settings ................................................................................................... 19

4.4.3 Onboard Device Conguration ........................................................................ 20

4.4.4 Hardware Health Conguration ...................................................................... 20

4.4.5 Super IO Conguration .................................................................................... 20

4.4.6 S5 RTC Wake Settings ..................................................................................... 21

4.4.7 Serial Port Console Redirection ...................................................................... 21

4.4.8 CPU Conguration ........................................................................................... 22

4.4.9 SATA Congurations ........................................................................................ 22

4.4.10 PCI Subsystem Settings ................................................................................ 23

4.4.11 CSM Conguration ....................................................................................... 23

4.4.12 USB Conguration ........................................................................................ 23

4.5 Chipset ...................................................................................................24

4.5.1 Intel Server Platform Services Conguration ................................................. 24

4.5.2 North Bridge Conguration ............................................................................. 24

4.5.3 South Bridge Conguration ............................................................................. 25

4.6 Security ..................................................................................................26

4.6.1 Security ............................................................................................................ 26

4.7 Server Management ..............................................................................27

4.7.1 FRB-2 Timer ..................................................................................................... 27

4.7.2 OS Watchdog Timer ......................................................................................... 27

4.7.3 System Event Log ............................................................................................ 28

4.7.4 BMC Network Conguration ........................................................................... 28

4.8 Boot ........................................................................................................29

4.8.1 Boot .................................................................................................................. 29

4.9 Save and Exit ..........................................................................................30

4.9.1 Save and Exit .................................................................................................... 30

Chapter 5. BMC Conguration Settings �� 31

5.1 Login .......................................................................................................31

5.2 Web GUI ................................................................................................32

5.2.1 Menu Bar .......................................................................................................... 32

5.2.2 User Information and Quick Button ............................................................... 33

5.2.3 Dashboard ........................................................................................................ 34

5.2.4 Sensor .............................................................................................................. 34

5.2.5 System Inventory ............................................................................................. 35

5.2.6 FRU Information ............................................................................................... 35

5.2.7 Logs and Reports ............................................................................................ 36

5.2.8 Settings ............................................................................................................ 37

Contents

5.2.9 Remote Control ................................................................................................ 39

5.2.10 Power Control ................................................................................................ 44

5.2.11 Chassis Identify Control ................................................................................ 45

5.2.12 Set Front Panel Enables ................................................................................ 45

5.2.13 Maintenance .................................................................................................. 46

5.2.14 Sign out .......................................................................................................... 48

Chapter 6� Technical Support �� 49

Contents

Document Release History

Release Date Version Update Content

April

2018

1 User's Manual release to public.

September

2018

2

1. New cover

2. Correct grammar error

3. Connector and jumper update

Novemer

2018

2.2

1. Motherboard settings update

2. Datasheet

March

2019

2.3 1. BIOS update

Contents

This document contains proprietary information about

AIC products and is not to be disclosed or used except in

accordance with applicable agreements.

Copyright

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photo-static, recording

or otherwise, without the prior written consent of the manufacturer.

Trademarks

All products and trade names used in this document are trademarks or registered

trademarks of their respective holders.

Changes

The material in this document is for information purposes only and is subject to change

without notice.

Warning

1. A shielded-type power cord is required in order to meet FCC emission limits and also

to prevent interference to the nearby radio and television reception. It is essential

that only the supplied power cord be used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. You are cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

Disclaimer

AIC shall not be liable for technical or editorial errors or omissions contained herein.

The information provided is provided "as is" without warranty of any kind. To the

extent permitted by law, neither AIC or its afliates, subcontractors or suppliers will be

liable for incidental, special or consequential damages including downtime cost; lost

profits; damages relating to the procurement of substitute products or services; or

damages for loss of data, or software restoration. The information in this document

is subject to change without notice.

Preface

i

ii

Safety Instructions

When installing, operating, or performing maintenance on this equipment, the following

safety precautions should always be taken into account in order to reduce the risk of re,

electric shock, and personal injury.

Carefully read the safety instructions below before using this product.

• Observe all of the warning and instruction signs distinctively marked on the product.

• Before performing system installations, please consult the User’s Manual provided

with this product.

• Do not place this product on an uneven or weak surface (unstable cart, stand, table,

ect.) that might induce the product to fall and sustain serious damage.

• Install only the equipment or device identied in the User’s Manual. Deploying other

equipment or device with this motherboard could invoke improper connection of

circuitry that leads to re or personal injury.

• This product should only be operated with the type of power source indicated on the

marked label. If you are questionable about which type of power supply is used in your

area, consult your dealer or local Power Company.

• Disconnect the power supply module before removing power from the system.

• Unplug this product from the wall outlet before cleaning. Use a damp cloth for

cleaning. Do not use liquid cleaners or aerosol cleaners.

• Do not use this product near a water source, including faucet and lavatory.

• Never spill liquids of any kind on this product.

• Never shove objects of any kind into this product’s open slots, as they may touch

dangerous voltage points or short out parts and could result in re or electric shock.

• Do not block or cover slots and openings in this unit, as they were made for ventilation

and prevent this unit from overheating. Do not place this product in a built-in

installation unless proper ventilation is available.

• Do not disassemble this product. This product should only be taken apart by trained

personnel. Opening or removing covers and circuit boards may expose you to electric

shock or other risks. Incorrect reassembly can also cause electric shock when the

unit is subsequently used.

• Risk of explosion is possible if battery is replaced with an incompatible type. Dispose

of used batteries accordingly.

• This product is equipped with a three-wire grounding type plug, a plug with a third

(grounding) pin. As a safety feature, this plug is intended to t only into a grounding

type power outlet. If you are unable to insert the plug into the outlet, contact your

electrician to replace the outlet. Do not remove the grounding type plug or use a

3-Prong To 2-Prong Adapter to circumvent the safety feature; doing so may result in

electric shock and/or damage to this product.

About This Manual

Thank you for selecting and purchasing the Lepus Server board.

This user's manual is provided for professional technicians to perform easy hardware

setup, basic system congurations, and quick software startup. This document pellucidly

presents a brief overview of the product design, device installation, and rmware settings

for the Lepus motherboard. For the latest version of this user's manual, please refer to the

AIC website: http://www.aicipc.com/rus/productdetail/50982.

Chapter 1 Product Features

This chapter delivers the overall layout of the product, including the fundamental

components on the motherboard, design specications, and noteworthy features. Lepus

is an ideal server grade motherboard that is specifically designed to accommodate

diverse enterprises for managing heavy workloads, databases, nearline applications, and

cloud deployments. This product supports the Intel® Xeon® processor E3-1200 v5/v6

family and H3 socket type (LGA-1151) with a memory support 4 DDR4 2133/2400 MHz of

up to 64 GB.

Chapter 2 Hardware Setup

This chapter displays an easy installation guide for assembling the CPU (Central

Processing Unit) and memory module. Utmost caution for proceeding to set up the

hardware is highly advised. The components on the motherboard are highly fragile and

vulnerable to exterior influence. Do not attempt to endanger the device by placing the

device in a potentially unstable or hazardous surroundings, including positioning the

device on an uneven grounds or humid environments.

Chapter 3 Motherboard Settings

This chapter elaborates the overall layout of the server motherboard, including

multifarious connectors, jumpers, and LED descriptions. These descriptions assist users

to congure different settings and functions of the motherboard, as well as to conrm the

location of each connector and jumper.

Chapter 4 BIOS Conguration Settings

This chapter introduces the key features of BIOS, including the descriptions and option

keys for diverse functions. These details provide users to effortlessly navigate and

congure the input/output devices.

Chapter 5 BMC Conguration Settings

This chapter illustrates the diverse functions of IPMI BMC, including the details on logging

into the web page and assorted denitions. These descriptions are helpful in conguring

various functions through Web GUI without entering the BIOS setup. For more information

of BMC congurations, please refer to IPMI BMC (Aspeed2400) User's Manual for a more

detailed description.

Chapter 6 Technical Support

For more information or suggestion, please contact the nearest AIC corporation

representative in your district or visit the AIC website: http://www.aicipc.com/en. It is our

greatest honor to provide the best service for our customers.

iii

Chapter 1. Product FeaturesLepus User Manual

1

Ursa User Manual Chapter 1. Product Features

Chapter 1� Product Features

This section describes the hardware specications and features of the Lepus motherboard.

The fundamental components of the Lepus severboard are provided below.

1�1 Components

Lepus Serverboard

Product specications and features are subject to change without prior notice.

2

Chapter 1. Product FeaturesLepus User Manual

1.2 Specications

System

Processor

Support

Socket

Type

Socket H3 (LGA-1151)

System

Chipset

PCH

System

Memory

Unbuffered ECC UDIMM

Expansion

Slots

2 x PCIe x1 (PCH)

System

BIOS

BIOS Type

BIOS

Features

On-board

Devices

SATA

Built-in SATA controller with RAID support

PCH

SAS

Optional Broadcom/LSI SAS 3008 IOC

On-board

Devices

IPMI

Aspeed AST2400 Advanced PCIe Graphics &

Remote Management Processor

Serial over LAN

Network

for quad port GbE (BTO)

management port

Graphics

Aspeed AST2400 Advanced PCIe Graphics &

Remote Management Processor

Input/

Output

Serial ATA

6 x SATA 6.0Gb/s

SAS

(Option)

8 x SAS 12Gb/s(by 2x MiniSAS HD/SFF8643)

LAN

GbE (BTO)

USB

VGA

1 x external VGA port

Serial Port

Others

Debug display pin-header, GPIO port,

IPMB pin-header, Chassis intrusion,

PSMI pin-header

support dual port GbE

CPU TDP

80W

6th/7th generation Intel Core™ i3 processor

Intel® Pentium® processor Celeron® processor

up to 80W

3

Chapter 1. Product FeaturesLepus User Manual

Lepus, implementing the next generation 14nm Intel® Xeon® processor E3-

1200 v5/v6 series with benefits of Skylake and Kaby Lake processor, Gen3

PCI Express and more memory support in standard ATX form factor, offers

compelling performance and improved power efficiency for optimized and

efficient performance platforms (storage, security and communications

infrastructure).

The Lepus series server board delivers unmatched performance, providing

support with two channels of DDR4 2400/2133 Unbuffered ECC UDIMM, Up to

4x1GBase-T, and optional Broadcom/LSI SAS 3008 IOC onboard. Lepus series

server board enables next generation server solutions with an incredible leap

in performance in a standard ATX form factor platform.

• Supports one Intel® Xeon® Processors E3-1200 v5/v6 product family,

6th generation Intel® Core™ i3 processor, Intel® Pentium® processor or

Celeron® processor

• An optimal number of PCIe slots with one x16 (x8 lanes)and one x8

• Comes with Intel® Ethernet Controller I210 to support up to 4GbE ports

• Onboard Baseboard Management Controller for system management and

IPMI control

1�3 Feature

4

Chapter 2. Hardware Setup

Lepus User Manual

2�1 Central Processing Unit (CPU)

2�1�1 Processor Support

The server board includes one processor socket H3 (LGA1151) that provides support

for more than two CPU types and a Thermal Design Power(TDP) of up to 80W on

selected models.

CAUTION

When unpacking a processor, hold the processor only by the edge to avoid touching the

contacts.

2�1�2 Installing the CPU

Step 1 Push the lever handle down and toward the CPU socket.

Rotate the lever handle up.

Chapter 2� Hardware Setup

Load lever

5

Chapter 2. Hardware SetupLepus User Manual

Step 2 While holding down the lever handle, with your other hand, lift open the

Load Plate.

Step 3 Remove the protective cover from the CPU socket. Do not throw away the

protective cover. It may be further used for RMA purposes.

Step 4 Orient the processor with the socket so that the processor cutouts match

the four orientation posts on the socket. Note the location of a gold key

at the corner of the processor. Carefully place (Do NOT drop) the CPU

into the socket.

Load plate

Processor protective cover

Cutouts

6

Chapter 2. Hardware Setup

Lepus User Manual

Step 5 Close the loading plate by pushing down the locking lever on the side.

Slide the tip of the lever under the notch on the loading plate. Make sure

the loading plate tab engages under the socket lever when fully closed.

Press to close

7

Chapter 2. Hardware SetupLepus User Manual

2�1�3 CPU Heatsink Installation

Step 1 Apply thermal grease onto the heatsink and position the heatsink onto

the CPU socket. Make certain that the heatsink is accurately positioned.

Step 2 Tighten the four screws in a diagonal sequence. Secure the screws a

couple of turns until the screws are tightly secured and the heatsink is

fastened onto the server board.

8

Chapter 2. Hardware Setup

Lepus User Manual

This server board supports 4 DIMM memory slots with 2 channel per CPU.

2�2�1 DIMM Installation

Step 1 Unlock the dimm socket by pressing the retaining clips outward.

Step 2 Insert the memory module into the slot. Make sure that the DIMM notch is

accurately positioned.

Step 3 Close the retaining clips to complete installation.

DIMM n

otch

2�2 System Memory Setup

9

Chapter 2. Hardware SetupLepus User Manual

2�2�2 DIMM Location

2�2�3 Dimm Slot Installation Order

Populate the DIMM slots in the following order.

JDIMMB1

JDIMMB0

JDIMMA1

JDIMMA0

CPU1

JDIMM_A0

JDIMM_B0

CPU0

DIMM NUMBER DIMM ARRANGEMENT

2 DIMMs

JDIMM_A0

JDIMM_B0

JDIMM_A1

JDIMM_B1

CPU0

DIMM NUMBER DIMM ARRANGEMENT

4 DIMMs

JDIMMB1

JDIMMB0

JDIMMA1

JDIMMA0

CPU1

10

Chapter 3. Motherboard SettingsLepus User Manual

This section provides illustrations that display the internal jumpers, connectors, and

system LED indicators on the Lepus motherboard. The motherboard layout and essential

connectors are listed below for your reference.

3�1 Block Diagram

Chapter 3� Motherboard Settings

Intel Skylake-H PCH

Aspeed IBMC

AST2400

Intel Skylake-S

LGA 11551

(Socket H4)

Intel I210

GbE Controller

Intel I210

GbE Controller

Intel I210

GbE Controller

Intel I210

GbE Controller

PCI Express x1 Slot

TPM/80 Port Module

BCM5221 Gb PHY

Smart Fan Controller

COM1

COM2

SPI Flash ROM

Voltage and Thermal Monior

D-Sub VGA Output

SATA4

SATA5

SATA6

SATA1

SATA2

SATA3

RJ45

Jack

RJ45

Jack

RJ45

Jack

RJ45

Jack

RJ45

Jack

USB3.0 USB3.0

USB3.0 USB3.0 USB3.0 USB3.0

USB2.0

PCI Express x16 Slot

PCI Express x8

PTN3355

Display Port to VGA

LSISAS3008

12Gb/s SAS+SATA Controller

0 ohn Resistor

BOM opon

Mini-SAS HD Conn.

USB2.0 USB2.0

DDR4

VCCcore = PXC1410A + TDA2132 x4

VCCsa

VCCgt = PXC1410A + TDA2132 x3

TDA2132 x1

VDDQ = ISL95870B + FDPC8016S x1

VPP = IR3898 x1

VTT = TpS51200 x1

PCIE#1

PCIE#2

System BIOS

BMC Firmware

PCIE#3

PCIE#5

PCIE Gen3 x1

SATA Gen3 (6.0Gb/s)

PCIE Gen3 x8

USB3.0 x7

USB2.0 x2

PCIE Gen3 x8

MDI

UART1

UART2

SPI Interface

MDI

RMII Interface

Network Controller Sideband Interface

Analog Display Interface

LPC Interface

SPI Interface

PCIE Gen3 x1

Rear

Pin Header

Rear

Pin Header

Type A

Embedded Display Port Interface

Channel B

Channel A

DMI

Gen3 x4

Analog Display Interface

11

Chapter 3. Motherboard SettingsLepus User Manual

Connector/Jumper/Header Location Connector/Jumper/Header Location

1

DIMM_A0

(DDR4, Blue,

Address:0xA0)

J8C1

20

SATA Port (SATA 3.0,

6 Gbit/s)

SATA3, J43

2

CPU Fan, PIN

Header

J14

21

SATA Port (SATA 3.0,

6 Gbit/s)

SATA4, J42

3

System FAN5 Pin

Header

J15

22

SATA Port (SATA 3.0,

6 Gbit/s)

SATA5, J41

4

PSMI Pin Header J16

23

SATA SGPIO Pin

Header (HBA)

J34

5

ATX 24-Pin Power

Supply Connector

J32, PW1

24

USB Header (USB

3.0, ,5G/s)* 2

J35

6

IPMB Pin Header J51

25

USB Port (USB2.0,

Type-A, 480M/s)

J33

7

DIMM_B1

(DDR4, Black,

Address:0xA6)

J8C4

26

USB Header (USB

2.0, 480M/s)* 2

FP_USB_1

8

DIMM_B0

(DDR4, Blue,

Address:0xA4)

J8C3

27

SAS Port (LSI

SAS3008, MINI SAS,

2 Port, 12 Gbit/s)

OPTIONAL WITH

BTO

J29

9

DIMM_A1

(DDR4, Black,

Address:0xA2)

J8C2

28

SAS Port (LSI

SAS3008, MINI SAS,

2 Port, 12 Gbit/s)

OPTIONAL WITH

BTO

J28

10

System FAN1 Pin

Header

J50

29

CMOS Clear Jumper J26

11

System FAN2 Pin

Header

J49

30

ME Firmware Update

Jumper

J256

12

System FAN3 Pin

Header

J48

31

LAN3 LED J24

13

System FAN4 Pin

Header

J47

32

LAN2 LED J23

14

Power button J37

33

SSI FP I/O PIN

Header

J20

15

Reset button J36

34

System FAN Board

Pin Header

J19

16

BMC Caterr Error

LED

LED5

35

TPM & debug header J13

17

SATA Port (SATA

3.0, 6 Gbit/s)

SATA0, J46

36

RS-232_DB-9_COM-

Port_2 Pin Header

J9

18

SATA Port (SATA

3.0, 6 Gbit/s)

SATA1, J45

37

PCI Express Slot (x1

Slot, w/x1 link)

J17

19

SATA Port (SATA

3.0, 6 Gbit/s)

SATA2, J44

38

BMC Heart Beat LED,

Green

LED2

3�2 Content List

Page is loading ...

AIC SB202-LE User manual

This manual is also suitable for

AIC SB202-LE User manual

Related papers

Other documents