Chauvet Professional ÉPIX Reference guide

Quick Reference Guide

English EN

Español ES

Français FR

Nederlands NL

1

EN

QUICK REFERENCE GUIDE

EPIX Strip IP 50 QRG Rev. 2

About This Guide

The EPIX Strip IP 50 Quick Reference Guide (QRG) has basic product information such as connection and mounting.

Download the ÉPIX Drive 2000 IP User Manual from www.chauvetprofessional.com

for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration

.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration

.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

• CAUTION: This product’s housing may be hot when lights are operating.

• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow

product to fully acclimate to the surrounding environment before connecting it to power.

• CAUTION: This product’s housing may be hot when lights are operating.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.

• USE a safety cable when mounting this product overhead.

• DO NOT submerge this product (IP65). Temporary outdoor operation is fine.

• When using this product in an outdoor environment, use IP65 (or higher) rated power and data cables. Be sure to

secure unused power and data ports with attached IP65 covers.

• DO NOT operate this product if the housing, ports, or cables appear damaged.

• DO NOT connect this product to a dimmer or rheostat.

• ONLY connect this product to an ÉPIX Drive 2000 IP or ÉPIX Drive 900.

• Only use the hanging/mounting bracket to carry this product.

• In the event of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

Contact

Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request

support or return a product. Refer to Contact Us

at the end of this QRG for contact information.

What is Included

• EPIX Strip IP 50

• Square Milky Filter (Installed)

• Black Stealth Filter

• Round Milky Filter

• Quick Reference Guide

EN

2

EPIX Strip IP 50 QRG Rev. 2

QUICK REFERENCE GUIDE

Product Overview

Product Dimensions

Data/Power

Interlocking

Hardware

Mounting Bracket

Fastening Knob/

Safety Loop

Data/Power

Filter

19.68 in

500 mm

2.32 in

59 mm

5.04 in

128 mm

3.66 in

93 mm

3.78 in

96 mm

1.38 in

35 mm

1.33 in

34 mm

3.94 in

100 mm

1.89 in

48 mm

3

EN

QUICK REFERENCE GUIDE

EPIX Strip IP 50 QRG Rev. 2

Power

This product is powered by an ÉPIX Drive 2000 IP or ÉPIX Drive 900. Refer to the ÉPIX Drive 2000 IP/900 User Manuals

for detailed instructions on how to connect this product to power.

Power Linking

You can link up to 20 EPIX Strip IP 50 products to each port of an ÉPIX Drive 2000 IP. Never exceed this number.

Scrambled Pulse-Width Modulation

This product features Scrambled-PWM (S-PWM) technology, which de-synchronizes the pulse widths of each color of the

multi-color LEDs. This ensures that there is always some LED output, reducing flicker, and maintaining the same

grayscale performance.

Filter Installation

The EPIX Strip IP 50 includes a Square Milky Filter already installed. Follow the procedure below to install the included

Black Stealth Filter or Round Milky Filter.

1. Locate the end cap of the product that does not have the interlocking hardware.

2. Push in on the end-cap latch.

3. Slide the installed filter out and replace it with the desired filter.

4. Release the end-cap latch.

• Use ONLY IP65 4-pin XLR cables with the EPIX Strip IP 50. For our CHAUVET Professional line

of IP65 4-pin XLR cables, go to https://www.chauvetprofessional.com/accessories

.

• To eliminate wear and improve its lifespan, during periods of non-use completely disconnect

the ÉPIX Drive 2000 IP from power via breaker or by unplugging it.

!

Interlocking Hardware

End-Cap Latch

EN

4

EPIX Strip IP 50 QRG Rev. 2

QUICK REFERENCE GUIDE

Mounting

Before mounting this product, read the Safety Notes. Use at least one mounting point per product. Make sure the

mounting clamps are capable of supporting the weight of the product. For our CHAUVET Professional line of mounting

clamps, go to http://trusst.com/products

.

Mounting Diagram

Safety Cable

Safety Loop

Eye Bolts

Mounting Clamp

5

EN

QUICK REFERENCE GUIDE

EPIX Strip IP 50 QRG Rev. 2

Vertical Mounting Instructions

1. Attach the clamp to the mounting bracket.

2. Attach the clamp to the desired structure or surface.

3. Attach a safety cable to the product’s safety loop.

Never attach more than 6 products together when hanging vertically from a single mounting point.

Attach the Safety Cable

of the first product to

the mounting point

Attach the Safety Cable of the

following products to the

Bracket of the preceding product

!

EN

6

EPIX Strip IP 50 QRG Rev. 2

QUICK REFERENCE GUIDE

Series Attachment Instructions

The EPIX Strip IP 50 can be attached in an end to end formation to create a strip up to 4 meters long from one mounting

point. Do not connect any more than 6 EPIX Strip IP 50 products in a row when hanging vertically.

1. Loosen the 2 fastening eye bolts.

2. Slide the connecting bracket out until it stops and tighten the eye bolt closest to the center of the product.

3. Slide the second EPIX Strip IP 50 into the connecting bracket and tighten the remaining eye bolt.

4. Attach the safety cable as shown in Vertical Mounting Instructions

.

Install the safety cable last when attaching EPIX Strip IP 50 products in series.

1

3

2

7

EN

QUICK REFERENCE GUIDE

EPIX Strip IP 50 QRG Rev. 2

Technical Specifications

Dimensions and Weight

Note: Dimensions in inches are rounded.

Power

Light Source

Photometrics

Control

Thermal

Ordering

Filter Length Width Height Weight

Square Milky Filter 19.68 in (500 mm) 1.33 in (34 mm) 3.93 in (100 mm) 3.4 lb (1.5 kg)

Black Stealth Filter 19.68 in (500 mm) 1.33 in (34 mm) 3.46 in (88 mm) 3.4 lb (1.5 kg)

Round Milky Filter 19.68 in (500 mm) 1.77 in (45 mm) 5.03 in (128 mm) 3.4 lb (1.5 kg)

Power Supply Range Power Linking

ÉPIX Drive 2000 IP 100 to 240 VAC, 50/60 Hz 20 per ÉPIX Drive 2000 IP port

Parameter 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz

Consumption 16 W 17 W 17 W

Operation Current 0.133 A 0.082 A 0.073 A

Power I/O U.S./Worldwide UK/Europe

Power Input Connector IP65 4-pin XLR IP65 4-pin XLR

Power Cord Plug IP65 4-pin XLR IP65 4-pin XLR

Type Color Quantity Lifespan

SMD 505 LED Tri-color RGB 50 50,000 hours

Parameter Square Milky Filter Black Stealth Filter Round Milky Filter

Viewing Angle 160° 125° 160°

Illuminance 2,470 NITS 1,455 NITS 1,360 NITS

Pixel Pitch 10 mm 10 mm 10 mm

Refresh Rate 4,800 Hz 4,800 Hz 4,800 Hz

Data I/O Channel Range (Art-Net™/sACN) Channel Range (Kling-Net)

IP65 4-pin XLR 7, 15, 30, 75, or 150

Determined by ArKaos MediaMaster

software

Maximum External Temp. Cooling

113 °F (45 °C) Convection

Product Name Item Name Item Code UPC Number

EPIX Strip IP 50 EPIXSTRIPIP 03091435 781462217839

Page is loading ...

23

NL

BEKNOPTE HANDLEIDING

EPIX Strip IP 50 QRG Rev. 2

Productbeschrijving

Productafmetingen

Filter

Gegevens/stroom-ingang

Verbindende

apparatuur

Montagebeugel

Bevestigingsknop

/veiligheidslus

Gegevens/stroom-uitgang

19.68 in

500 mm

2.32 in

59 mm

5.04 in

128 mm

3.66 in

93 mm

3.78 in

96 mm

1.38 in

35 mm

1.33 in

34 mm

3.94 in

100 mm

1.89 in

48 mm

Page is loading ...

Multi-Language

QUICK REFERENCE GUIDE

27

EPIX Strip IP 50 QRG Rev. 2

Contact Us

Visit the applicable website above to verify our contact information and instructions to request support. Outside the

U.S., United Kingdom, Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.

General Information Technical Support

Chauvet World Headquarters

Address: 5200 NW 108th Ave. Voice: (844) 393-7575

Sunrise, FL 33351 Fax: (954) 756-8015

Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com

Fax: (954) 929-5560

Toll Free: (800) 762-1084 Website: www.chauvetprofessional.com

Chauvet Europe Ltd.

Address: Unit 1C Email: [email protected]

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu

NG16 6NT

Voice: +44 (0) 1773 511115

Fax: +44 (0) 1773 511110

Chauvet Europe BVBA

Address: Stokstraat 18 Email: BNLtec[email protected]

9770 Kruishoutem

Belgium Website: www.chauvetprofessional.eu

Voice: +32 9 388 93 97

Chauvet France

Address: 3, Rue Ampère

91380 Chilly-Mazarin

Email: [email protected]

France Website: www.chauvetprofessional.eu

Voice: +33 1 78 85 33 59

Chauvet Germany

Address: Bruno-Bürgel-Str. 11

28759 Bremen

Email: DEtech@chauvetlighting.de

Germany Website: www.chauvetprofessional.eu

Voice: +49 421 62 60 20

Chauvet Mexico

Address: Av. de las Partidas 34 - 3B

(Entrance by Calle 2)

Email: [email protected]

Zona Industrial Lerma Website: www.chauvetprofessional.mx

Lerma, Edo. de México, CP 52000

Voice: +52 (728) 690-2010

UL 1573

CSA C22.2 No. 166

E113093

R

Chauvet Professional ÉPIX Reference guide

This manual is also suitable for

Chauvet Professional ÉPIX Reference guide

in other languages

Related papers

Other documents