Springdale Ligthing STT17002 Installation guide

Brand
Springdale Ligthing
Model
STT17002
Type
Installation guide

Springdale Ligthing STT17002 is a basic table lamp with a variety of features that make it a versatile and stylish addition to any home. The lamp's base is made of metal and features a weighted bottom for stability. The shade is made of fabric and is available in a variety of colors and patterns. The lamp also includes a harp and finial for securing the shade in place.

The STT17002 is easy to assemble and requires no tools. Simply insert the bulb into the socket, place the shade over the base, and tighten the screws. The lamp also includes a knurl nut on the harp that can be used to adjust the height of the shade.

Springdale Ligthing STT17002 is a basic table lamp with a variety of features that make it a versatile and stylish addition to any home. The lamp's base is made of metal and features a weighted bottom for stability. The shade is made of fabric and is available in a variety of colors and patterns. The lamp also includes a harp and finial for securing the shade in place.

The STT17002 is easy to assemble and requires no tools. Simply insert the bulb into the socket, place the shade over the base, and tighten the screws. The lamp also includes a knurl nut on the harp that can be used to adjust the height of the shade.

FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Basic Table Lamp
ASSEMBLY INSTRUCTIONS:
This is a generic illustration and may not be identical to your lamp.
1. Place the base (A) on a level surface.
2. Insert the bulb into bulb socket (C).
3. Pinch the two wire springs (B) together and place shade
(D) over the base.
Place the top over the glass and tighten
screws (J) to secure.
4. Insert the harp (F) until it sits firmly into the saddle (E.
5. Adjust the knurl nut (G) on harp (F).
This can be used to raise the shade a little if
necessary.
6. Place the shade (H) over the end of the harp (E) and
tighten the finial (I) securing the shade in place.
7. Insert the bulb into the bulb socket.
Important:
Check the lamp socket for information on the maximum wattage
recommended for your specific lamp.
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth. Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Version#:SD-TL-H-SPC
Made in China / Revision 06/08/1
Lámpara de mesa básicos
INSTRUCIONES DE ASAMBLEA:
Esta es una ilustración genérica y puede que no ser idéntica a su lámpara
.
1. Ponga la base (A) en una superficie llana.
2. Inserte bombilla en el zócalo (C).
Apriete los dos resortes de alambre (B) y coloque la pantalla (D)
sobre la base (A). Coloque la parte superior sobre el vidrio y
apriete los tornillos (E) para asegurar.
3. Inserte la arpa (F) hasta que se siente firmemente
en la silla de montar (E).
4. Ajuste la tuerca redonda (G) en la arpa (F).
Esto se puede utilizar para levantar la pantalla un
poco en caso que sea necesario.
5. Coloque la pantalla (H) sobre el extremo de la
arpa (F) y apriete la tuerca finial (I) asegurando la
pantalla en su lugar.
6. Inserte un bulbo en el zócalo.
Importante:
Verifique el zócalo de la lámpara para obtener información sobre la potencia máxima
recomendado para su lámpara específica.
Limpieza de lampara
Desenchufe la lámpara, limpiar con un trapo húmedo. No utilice los abrasivos.
*Guardar estas instructiones para una referencia futura.
Version#:
SD-TL-H-SPC
Hecho en China / Revision –06/08/17
PARA RAZONES DE REGRASAR: POR FAVOR
CONSERVE EL IMPAQUETADO ORIGINAL
PARA REDUCIR DAÑOS MINIMO.
  • Page 1 1
  • Page 2 2

Springdale Ligthing STT17002 Installation guide

Brand
Springdale Ligthing
Model
STT17002
Type
Installation guide

Springdale Ligthing STT17002 is a basic table lamp with a variety of features that make it a versatile and stylish addition to any home. The lamp's base is made of metal and features a weighted bottom for stability. The shade is made of fabric and is available in a variety of colors and patterns. The lamp also includes a harp and finial for securing the shade in place.

The STT17002 is easy to assemble and requires no tools. Simply insert the bulb into the socket, place the shade over the base, and tighten the screws. The lamp also includes a knurl nut on the harp that can be used to adjust the height of the shade.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents