Springdale Lighting 1800/883A Installation guide

Type
Installation guide
FOR RETURN SHIPPING PU
RPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Basic Accent Lamp
w/ Spring Clips
ASSEMBLY INSTRUCTIONS:
This is a generic illustration and may not be identical to your lamp.
1. Place the lamp base (A) on a level surface.
2. Insert bulb into socket (D).
3.
Pinch the two wire springs (B) and place the shade (C)
over the base.
4. Place the top over the glass and tighten screws (E) to secure.
Important:
Check the lamp socket for information on the maximum wattage
recommended for your specific lamp.
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth. Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Version#: SD-AC-Bear
Made in China / Revision 06/07/17
Lámpara básica de acento
con brazos de resorte
INSTRUCIONES DE ASAMBLEA:
Esta es una ilustración genérica y puede que no ser idéntica a su lámpara
.
1. Coloque la base de la lámpara (A) sobre una superficie nivelada.
2. Inserte la bombilla en el zócolo (D).
3. Apriete los dos resortes de alambre (B) y coloque la pantalla (C)
Sobre la base.
4. Coloque la parte superior sobre el vidrio y
apriete los tornillos (E) para asegurar.
Importante:
Verifique el zócalo de la lámpara para obtener información sobre la potencia máxima
recomendado para su lámpara específica.
Limpieza de lampara
Desenchufe la lámpara, limpiar con un trapo húmedo. No utilice los abrasivos.
*Guardar estas instructiones para una referencia futura.
Version#: SD-AC-Bear
Hecho en China / Revision 06/07/17
PARA RAZONES DE REGRASAR: POR FAVOR
CONSERVE EL IMPAQUETADO ORIGINAL
PARA REDUCIR DAÑOS MINIMO.
  • Page 1 1
  • Page 2 2

Springdale Lighting 1800/883A Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI