Lightolier Lytecel Linear Surface/Pendant And Electrical Feed User manual

Brand: Lightolier

Model: Lytecel Linear Surface/Pendant And Electrical Feed

Type: User manual

Lightolier Lytecel Linear Surface/Pendant And Electrical Feed is a versatile lighting system that can be used for a variety of applications. It can be used as a surface mount or pendant, and it can be used for continuous rows or individual fixtures. The system is easy to install, and it comes with all the necessary hardware.

The Lytecel system is available in two sizes: 4' and 8'. It can be used with a variety of lamps, including fluorescent, LED, and HID. The system is also compatible with a variety of accessories, such as reflectors, stems, and cables.

Lightolier

45 INDUSTRIAL WAY, WILMINGTON, MA 01887

LYTECEL LINEAR SURFACE/PENDANT AND ELECTRICAL FEED INSTRUCTIONS

NOTE: Fixture should be installed by a qualified electrician. Before installation, see dimensions.

Dimensions

Twist-on

Wirenuts

Remove Wireway Cover

to expose Wirenuts

for thru wiring

Wago Plug-in

Wirenuts

Twist-on

Wirenuts

Feed End

Remove Wireway Cover

tp expose Wirenuts

for thru wiring

Wago Plug-in

Wirenuts

Unit

Continuous End

Slide Grip Hanger Assembly

End Or Middle of Row

Remove Louver by releasing four Spring-loaded

Latches. Remove Wireway Cover. Remove K.O.s

(2) from top of End Plate and install Slide Grip

Hanger into K.O. openings. Secure Slide Grip

Hanger to Fixture with Screw Provided. Feed

wires through opening in End Plate, into Wireway

Tab

End Cap

Screw Provided

Wireway

Cover

Ball

Chain

Louver

K.O.s

Slide

Grip

Hanger

Screw

Provided

Fixture

Screw

Provided

Screw

Provided

Slide

Grip

Hanger

Fixture

Wago

Plug-ins

Surface Mount Direct to Surface Without Slide

Grip Hanger

Insert Flexible Connector with at least 1/2" long

leads into wiring compartment and secure the

Flexible Connector with the Flexible Connector

Locknut. Mount the Fixture to the ceiling with

Mounting Screws (by others) or toggle bolts (not

supplied) through four 7/32" x 9/32" rectangular

holes. Make sure Fixture is mounted firmly and

the ceiling can withstand the weight of the Fixture.

Make electrical connections to Fixture, using twist-

on wirenuts provided. Re-install Wireway Cover,

install lamps (by others). Slip Ball Chain into key

slots in Wireway Cover and Install Louver.

Flexible

Connector

Wiring

Compartment

Flexible

Connector Locknut

Mounting

Screw

Assemble Slide Grip Hanger to Fixture as in

Step 2. Bring service leads from Outlet Box

through AC1 and Slide Grip Hanger, securing AC1

and Slide Grip Hanger to Outlet Box.

Outlet Box, Canopy, Slide Grip Hanger

Outlet

Box

AC1

Slide Grip

Hanger

End

Plate

Fixture

K.O.'s (2)

and make wiring connections. If Fixture is to be

used as an individual, or mounting is to be at

joints, assemble Slide Grip Hanger to both ends of

1st Fixture.

Assemble End Cap to Fixture with Screws (2)

Provided at end of row. Install Wireway Cover and

Louver.

Lytecel 6-page Inst. Sht.qxd 2/25/05 4:40 PM Page 1

Cable Set for Continuous Row or End of Row with

Reflector or without Reflector

Secure cable set with threaded end of Mounting

Strap through Canopy into Top Cable Bushing.

Assemble Bottom Cable Bushing to Slide Grip

Hanger with Nut as shown. Assemble Strain Relief in

K.O. in Slide Grip Hanger and seat properly. Use

Screws to assemble End Cap to Fixture. Bend tabs

out to secure Slide Grip Hanger to Fixture when not

installed at end of Fixture.

Catalog No. WC60 – Canopy, Cable

Catalog No. WCC60 – Canopy, Cable, Straight Cord

Catalog No. WCCC60 – Canopy, Cable, Coiled Cord

Strain

Relief

Tab Detail

Mounting

Strap

Canopy

Top Cable

Bushing

Fixture Side Rail

Bottom

Cable

Bushing

Slide Grip

Hanger

Bottom

Cable

Bushing

Strain

Relief

Detail

Slide Grip

Hanger

Fixture

Side Rail

Strain Relief

Nut

Mounting

Strap

Canopy

Strain

Relief

Strain

Relief

Detail

Top Cable

Bushing

Fixture

Side

Rail

Bottom Cable Bushing

Slide Grip

Hanger

Fixture

End Cap

Nut

Strain

Relief

Screw

Strain Relief

(8') 99-3/4"

(4') 48"

Slide Grip Hanger Along Length of Fixture

Slide Grip Hanger for Beginning or End of Row

Stem Set for End of Row or Continuous Row

Mounting with Reflector or without Reflector.

Slip threaded end of stem through Canopy. Attach

Stem(s) to Slide Grip Hanger using Nuts as shown.

Assemble Slide Grip Hanger to Fixture Slide Rails.

Assemble Ball Aligner to Stem and Slide onto

Mounting Strap.

For sloped ceilings, be sure opening of Mounting

Strap is positioned facing upward with the slope of

the ceiling or Stem will disengage.

Bend Tab out to secure Slide Grip Hanger to

Fixture when not installed at end of Fixture. Make

wiring connections. Using Screws, secure End Cap

to Fixture.

Canopy

Stem

Nut

Slide Grip

Hanger

Slide Grip

Hanger

Nut

Fixture

Side Rail

Fixture

Side Rail

Tab Detail

Slide Grip

Hanger

Nut

Stem

Mounting

Strap

Ball Aligner

Mounting

Strap

Nut

Slide Grip

Hanger

Fixture

End Cap

(8') 99-3/4"

(4') 48"

Screw

Slide Grip Hanger Along Length of Fixture

Slide Grip Hanger for Beginning or End of Row

Slide Grip Hanger Mounting Locations

12" (305mm)

Max. 4' Unit

24" (610mm)

Max 8' Unit

12" (305mm)

Max. 4' Unit

24" (610mm)

Max 8' Unit

Join Fixtures with Screws (2) Provided. Hook

wires into Slot in End Plate. Make Plug-in wiring

connections in Wireway. Replace Wireway Cover.

Through Wiring/Continuous Rows

Fixture

Screw

Provided

Screw

Provided

Wago

Plug-ins

Supplied

#14 Gauge

Maximum Wire

Solid or Stranded

Slot

Alignment

Tab

End Plate

48" (1219mm) or 96" (2439mm)

42" (1067mm) or 90" (2286mm)

3" (76mm) Min.

Lytecel 6-page Inst. Sht.qxd 2/25/05 4:40 PM Page 2

Lightolier Lytecel Linear Surface/Pendant And Electrical Feed User manual

Lightolier Lytecel Linear Surface/Pendant And Electrical Feed User manual

Lightolier Lytecel Linear Surface/Pendant And Electrical Feed User manual

Related papers

Other documents