Lightolier Eye-QLB User manual

Brand: Lightolier

Model: Eye-QLB

Type: User manual

Continuous Row Mounting

• With Fixture on its back, align Coupler holes with

second and third holes in Housing.

• From inside Coupler and Outside Fixture, drive

(2) Screws into First Housing.

•

Assemble Stem Sets or Cable Sets.

• For Continuous Row Mounting use Stem Sets or

Cable Sets at the joints.

• Hang First Fixture and secure Second Fixture with

Coupler and Screws.

• Make wiring connections, install T5/T8 lamps (by

others).

Continuous Row

• For continuous row mounting, remove End Cover.

Preparation

• Rotate Side Reflectors to an open position.

• Remove Louver or Lens Assembly.

• Remove Side Reflectors by removing Tabs

from Slots.

Lightolier

45 INDUSTRIAL WAY, WILMINGTON, MA 01887

INSTALLATION INSTRUCTIONS FOR EYE-QLB LUMINAIRES

Cable

Set

First

Fixture

Coupler

Screw

Louver

Assembly

(Illustrated)

Side Reflector

End

Cover

Side

Reflector

Tabs/Slots

Stem Set

Second

Fixture

Coupler

First

Fixture

Fixtures shown in hanging position.

Screw

Second Fixture

Screw

End

Cover

End

Plate

Housing

Chain Hanger

• For Chain Hanger, use 2 chains for 4ft or 8ft,

or for individual or continuous row mounting.

Housing is supported by inserting Hook into

Slots in housing with ends of Hooks up

through next set of slots.

Side

Reflector

Safety

Chain

Louver Blade

Side

Reflector

Fixture

End

Side

Reflector

Safety

Cable

Prismatic

DR Acrylic

Lens

Side

Reflector

11/16” Dia. K.O.

(2 Places)

7/8” Dia. K.O.

39-3/8” (999mm)

41-3/4” (1059mm)

48” (1220mm)

Final Assembly (Louver)

• Replace Side Reflectors–put Tabs into Slots.

• Hang Louver Assembly on one Side Reflector.

• Attach Safety Chain (both ends of fixture) to hole

on the side of the louver.

• Rotate free side of Louver Assembly upward until

Louver Assembly rests evenly on both Side

Reflectors.

Final Assembly (Prismatic DR Acrylic Lens)

• Replace Side Reflectors–put Tabs into Slots.

• Hang Prismatic DR Acrylic Lens on one Slot Reflector.

• Attach each Safety Cable “S” Hook to hole in Side

Reflector.

• Rotate free side of Prismatic DR Acrylic Lens upward

until lens rests evenly on both Side Reflectors.

S Hook

Slots (8)

S Hook

Slots (8)

7/8” Dia. K.O.

(2 places)

4-3/8”

(111mm)

3-1/8”

(81mm)

11/16” Dia. K.O.

(2 Places)

48” (1220mm)

87-3/8” (2219mm)

89-3/4" (2279mm)

96" (2441mm)

Hook

S Hook

Chain

Hanger

Slots

Housing

End Plate

Housing is supported by

inserting Hook into Slots

in Housing with ends of

Hooks up thru next set

of slots.

Side

Reflector

Safety

Chain

Fixture End

Safety

Cable

"S"

Hook

Side Reflector

Occupancy Sensor

• Occupancy Sensor is supplied assembled to

End Cover and is secured to Housing with Screw

as shown.

Screw

Occupancy

Sensor

Housing

End

Cover

End

Plate

4-3/8”

(111mm)

3-1/8”

(81mm)

Lightolier Eye-QLB User manual

Lightolier Eye-QLB User manual

Lightolier Eye-QLB User manual

Related papers

Other documents