Sanyo VA-80EX User manual

Brand: Sanyo

Model: VA-80EX

Category: Security camera accessories

Type: User manual

About this manual

This housing is designed for outdoor installation.

Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference.

CAUTION:

Install this housing securely according to this

installation manual. Be aware that allowing the bracket

to fall with the camera on it may cause personal injury.

b Specifications

Color: Beige

Material: Metal

Waterproof Standard: Conforming to IP66

Operating Environment

(with power source connected) :

Temperature; -30°C - +50°C (-22°F - +122°F)

Humidity; less than 90% RH (no condensation)

Weight: Approx. 2.5 kg (5.5 lb)

Dimensions:

b Specifications of Heater

(built into VA-CM8C/CM8S)

Automatic switch ON/OFF temperature:

ON; Approx. 5°C (41°F)

OFF; Approx. 15°C (59°F)

Power supply: 24 V AC ± 10%, 50/60Hz

Power consumption: Max. 35 W (When heater turned on)

Example of

wall mounting

Example of

pendant mounting

Important

• Be careful when opening holes for installing the

unit. Work with the power and video cables pulled

out for easy installation.

• Make sure to properly perform waterproofing for the

ceiling or wall where you are installing the unit.

• Make sure that the surface in the installation

location has no unevenness and is strong enough

to bear the total weight of the unit.

Ǿ248 (9.8)

182 (7.2)

6 (0.2)

Unit: mm (inch)

INSTRUCTION MANUAL

Outdoor Housing

VA-80EX

Features and specifications are subject to change without

prior notice or obligations.

Accessories

Waterproof tape

Hexagonal wrench

Screws, washers

(for power board unit)

This installation should be made by a qualified service

person and should conform to all local codes.

EnglishFrançaisEspañolDeutsch中文简体

L9BHK_WA(VA-80EX).book 0 ページ２００７年１月１２日　金曜日　午後３時３５分

Safety precautions

CAUTION:

• Do not touch the connection cables and the power

supply plug with wet hands.

• Do not insert any metal, inflammable, or foreign object

into the cable hole. Doing so may cause fire or electric

shock.

• Since this product does not have waterproof

construction, do not expose it to water or other liquids.

Also, do not install it in a bathroom or shower room.

Doing so may cause fire or electric shock.

• Do not install the product on unsteady surfaces as it may

fall and cause injury or damage.

• Do not expose the product to shocks or install it in places

subject to vibration.

CAUTION: Changes or modifications not expressly

approved by the manufacturer may void the user’s authority

to operate this equipment.

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

For the customers in Canada

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage” within

the product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the

user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: To reduce a risk of fire or electric

shock, do not expose this product to rain or

moisture.

This class B digital apparatus complies with

Canadian ICES-003.

b WEEE Symbol Information

Please note:

Your SANYO product is designed and manufactured with high quality materials and components which can be

recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of

separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

This symbol mark and recycle system are applied only to EU countries and not applied to the

countries in the other area of the world.

L9BHK_WA(VA-80EX).book 1 ページ２００７年１月１２日　金曜日　午後３時３５分

Assembling the Outdoor Housing

● For the built-in heater and fan in the dome cover, you need an additional 24 V AC power supply.

● This housing is used in combination with a dome cover (clear/smoked) and a mounting bracket (wall/

pendant) that are sold separately.

☞ For how to install an assembled housing, refer to the instruction manual for the bracket used.

Also refer to the instruction manual for each associated device.

Hook the safety wire (A) of the dome cover on hook

hole (A’) located inside the housing.

Connect the heater cable (B) to the heater terminal

(B’) and the fan cable (C) to the fan terminal (C’).

Pass the supplied screws through power board

unit screw holes (D) and fasten them loosely using

washers (4 places).

Mount the power board unit in the housing aligning

the arrows (E) of the same color (blue) on them,

and then firmly tighten the screws loosely

fastened in the previous step.

• Make sure the terminal (F) and its cable are located

along the inner lateral face of the housing.

• Pull the video cable led from the ceiling or wall

toward the power board unit.

Fix the housing onto the mounting bracket (wall/

pendant).

☞ For details, please refer to “Outdoor Type” in the

Mounting Bracket Instruction Manual.

Connect the 24 V AC power cable to the terminal (F).

Connect other cables to the power board unit.

☞ For details, please refer to “Connections and Settings”

in the Installation Manual that comes with the camera

unit.

Fasten the camera unit safety wire (G) to the hook

(G’) inside the power board unit.

Align the arrows (E) of the same color (blue) on the

camera unit and the housing inner face, and push

the camera until you hear a click.

Remove the plastic cover (H) of the camera unit.

Attach the dome cover by fastening 4 screws (J)

using the supplied hexagonal wrench.

1. Attaching the dome cover

A’

B’

C’

Dome Cover:

• VA-CM8C (Clear)

• VA-CM8S (Smoked)

2. Mounting the power board unit

E; Blue

Video cable

Power Board Unit:

VA-84S/80S

3. Connecting cables

4. Mounting the camera unit

G’

E; Blue

* To remove the camera unit

L9BHK_WA(VA-80EX).book 2 ページ２００７年１月１２日　金曜日　午後３時３５分

Page is loading ...

1AC6P1P3168--

L9BHK/WA (0107KP-KV)

SANYO Electric Co., Ltd.

Printed in China

L9BHK_WA(VA-80EX).book 0 ページ２００７年１月１２日　金曜日　午後３時３５分

Sanyo VA-80EX User manual

Brand: Sanyo

Model: VA-80EX

Category: Security camera accessories

Type: User manual

Download PDF

report

in other languages

français: Sanyo VA-80EX Manuel utilisateur
español: Sanyo VA-80EX Manual de usuario
Deutsch: Sanyo VA-80EX Benutzerhandbuch
日本語: Sanyo VA-80EX ユーザーマニュアル

Sanyo VA-80EX User manual

Sanyo VA-80EX User manual

in other languages

Related papers

Other documents