EBAA Iron 170400 is a restraint harness for push-on joints on ductile iron pipe. It is designed to restrain ductile iron pipe conforming to ANSI/AWWA C151/A21.51 (all thickness classes) push-on pipe bells. The 170400 has a restraint ring on the spigot and a split ring behind the bell. It is used to prevent the pipe from separating due to the pull of the restrained joint and consists of a ductile iron bell ring, a ductile iron spigot ring, four 3/4 in. by 13 in. low alloy steel tie rods with nuts, and a 4 in. 1100 MEGALUG® restraint.
EBAA Iron 170400 is a restraint harness for push-on joints on ductile iron pipe. It is designed to restrain ductile iron pipe conforming to ANSI/AWWA C151/A21.51 (all thickness classes) push-on pipe bells. The 170400 has a restraint ring on the spigot and a split ring behind the bell. It is used to prevent the pipe from separating due to the pull of the restrained joint and consists of a ductile iron bell ring, a ductile iron spigot ring, four 3/4 in. by 13 in. low alloy steel tie rods with nuts, and a 4 in. 1100 MEGALUG® restraint.
EBAA Iron 170400 is a restraint harness for push-on joints on ductile iron pipe. It is designed to restrain ductile iron pipe conforming to ANSI/AWWA C151/A21.51 (all thickness classes) push-on pipe bells. The 170400 has a restraint ring on the spigot and a split ring behind the bell. It is used to prevent the pipe from separating due to the pull of the restrained joint and consists of a ductile iron bell ring, a ductile iron spigot ring, four 3/4 in. by 13 in. low alloy steel tie rods with nuts, and a 4 in. 1100 MEGALUG® restraint.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI