Samsung SOC-920P User manual

ANTI-VANDAL DOME CAMERA

SOC-920(P)

Installing Manual

Montageanleitung

Manuel d’installation

Manual de instalación

Manuale d’installazione

Installationsvejledning

Installationsbruksanvisning

Installatiehandleiding

Manual de instalação

àÌÒÚÛÍˆËﬂ ÔÓ ÛÒÚ‡ÌÓ‚ÍÂ

E

F

D

I

Es

NL

PT

DK

S

R

00351A SOC-920P-eng 11/19/03 3:15 PM Page 1

2

3

Important Safety Instructions

EE

6. If this product fails to operate normally, contact the store of purchase or

your nearest service center. Never disassemble or modify this product in any

way. (The manufacturer is not liable for any damage resulting from

unauthorized disassembly or repairs.)

7. When cleaning, do not spray water directly onto parts of the product. (Doing

so may cause fire or electric shock.) Wipe the surface with a dry cloth.

Never use detergents or chemical cleaners on the product, as this may result

in discoloration of surface or cause damage to the finish.

1. Do not drop objects on the product or apply strong shock to it. Keep away

from a location subject to excessive vibration or magnetic interference.

2. Do not install in a location subject to high temperature (over 50

°C/

122

°F

),

low temperature (below -10

°C/

14

°F

), or high humidity. (Doing so may cause

fire or electric shock).

3. Avoid a location which is exposed to direct sunlight, or near heat sources

such as heaters or radiators. (Neglecting to do so may result in a risk of fire).

4. If you want to relocate the already installed product, be sure to turn off the

power and then move or reinstall it.

5. Install in a well - ventilated location.

6. Remove the power plug from the outlet when there is a lightning storm.

(Neglecting to do so may cause fire or damage to the product.)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT

REMOVE REAR COVER. NO

USER SERVICEABLE PARTS

INSIDE. REFER TO QUALIFIED

SERVICE PERSONNEL.

1. Make sure that the cable is plugged in securely before using.

(A loose connection may result in fire.)

2. When installing the camera on a wall or ceiling, mount it safely and

securely. (A falling camera may cause personal injury.)

3. Do not place conductive objects (e.g., screwdrivers, coins, and

metal things) or containers filled with water on top of the camera.

(Serious injury may result from fire, electrical shock, or falling objects.)

4. Do not install in a sooty, dusty, or humid location.

(Doing so may cause fire or electric shock.)

5. If any unusual smells or smoke come from the unit, stop using the

product. In such case, immediately disconnect the power source and

contact the service center. (Continued use in such a condition may

cause fire or electric shock.)

This symbol indicates high voltage

is present inside. It is dangerous

to make any kind of contact with

any inside part of this product.

This symbol alerts you that

important literature concerning

operation and maintenance has

been included with this product.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

00351A SOC-920P-eng 11/19/03 3:15 PM Page 2

E

5

E

4

Table of Contents

Chapter 1

SOC-920(P) Overview

This chapter briefly introduces the SOC-920(P) and

describes its key features, part names and functions.

Chapter 1 SOC-920(P) Overview 5

SOC-920(P) Introduction 6

SOC-920(P) Overview 7

Chapter 2 Installing SOC-920(P) 8

Checking the Contents of the Package 9

Precautions for Installation and Use 11

Preparing Cable 12

Installing SOC-920(P) 13

Appendix SOC-920(P) Pin Configuration 15

SOC-920(P) Product Specifications 16

00351A SOC-920P-eng 11/19/03 3:15 PM Page 4

E

7

E

6

SOC-920(P) Introduction SOC-920(P) Overview

The SOC-920(P) Anti-Vandal Dome Camera is a camera for the VPP

(Video Professional Package) only.

The SOC-920(P) Anti-Vandal Dome Camera is a dome-typed surveillance

device that offers the best features of surveillance for banks, retail stores,

commercial buildings, industrial settings, and etc. It is designed to with-

stand intentional or accidental impact or vandalism.

The SOC-920(P) is an advanced surveillance device that enables a maxi-

mum of 120x zoom surveillance with its 12x zoom lens and 10x digital

zoom IC.

The SOC-920(P) is a multifunction surveillance device that is equipped

with all of the key features of the existing surveillance cameras: the Low-

Light Surveillance function that enables shooting moving objects under

extremely low illumination, the White Balance function that provides accu-

rate color rendition under any light source, the BLC function that enables

effective back light compensation even at locations with bright incident

light, and the One Auto Focus function that automatically tracks and focus-

es on the subject. The built-in microphone that allows the user to hear all

sounds generated in the monitoring area.

DOME COVER

00351A SOC-920P-eng 11/19/03 3:15 PM Page 6

E

9

E

8

Before Installation

Checking the Contents of the Package

Be sure to check that the following items are included in the package.

SOC-920(P)

CABLE

Installing Manual

Installing

Manual

Chapter 2

Installing SOC-920(P)

This chapter explains what to check before installing the

SOC-920(P), how to choose an installation site, and what

precautions should be taken during installation. Now, let’s

install the SOC-920(P) and connect cable.

00351A SOC-920P-eng 11/19/03 3:15 PM Page 8

E

11

E

10

Before Installation

Precautions for Installation and Use

✔ Please check whether the installation site can sufficiently support the weight of

the SOC-920(P) before installation.

✔ Make sure that the cable is not caught on anything or its insulation sheath is

not removed. (Neglecting to do so may cause fire or damage to the product.)

✔ Prevent people from approaching the installation area, where objects might fall

during installation. Move valuables to a safe location before installation.

✔ Install in a cool place and away from direct sunlight.

Be sure not expose the SOC-920(P) to direct sunlight even during use or

storage. Use the BLC function when operating the SOC-920(P) underneath a

spot light or under very bright lights.

✔ The SOC-920(P) must be used in an area where temperature and humidity are

kept within the limits specified below:

- Temperature: -10°C ~ +50°C (14°F~122°F)

- Humidity: Below 90%

✔ PLASTIC ANCHOR

2 ea.

❙❙

for ceiling installation

✔ ASSY SCREW TAPPING

2 ea.

❙❙

for ceiling installation

(TH M4 X L30 BLK + 0 RING)

✔ L WRENCH

1 ea.

❙❙

for COVER DOME removal

✔ TEMPLET

1 ea.

❙❙

An installation GUIDE for installing

on a ceiliing (ART PAPER)

✔ CABLE 20M

1 ea.

❙❙

Connecting the power and signal.

SOC-920(P) - Installation Examples

✔ It can be directly installed on ceilings.

✔ It can be directly installed on walls.

00351A SOC-920P-eng 11/19/03 3:15 PM Page 10

E

13

E

12

Installing SOC-920(P)

1. Choose an installation site that can sufficiently support the weight of the equip-

ments to be installed.

2. Attach the supplied template to the installation site, drill pilot holes (5 mm diam

eter, min. 35 mm depth), and then install and secure the supplied plastic

anchors (HUD 5).

3. Arrange them so that they will not be damaged or aught on anything when

installing the camera

4. Remove the DOME COVER to install the CAMERA.

1) Use the supplied L WRENCH to unfasten the 4

BOLTS for CASE fixing by turning them counter-

clockwise as shown in the illustration.

2) Disassemble the ASSY-DOME in the direction

shown in the illustration.

5. Install the CAMERA.

Align the CAMERA’s installation holes to the

holes where the PLASTIC ANCHORS are

inserted and then fasten the ASSY SCREW-

TAPPINGS (TH M4 X 30) with O RINGS.

(2 spots)

SAMSUNG

1) 2)

➜

Preparing Cable

The following cable are required to install and use the SOC-920(P).

Cable

00351A SOC-920P-eng 11/19/03 3:15 PM Page 12

E

15

E

14

Installing SOC-920(P)

6. Adjust the LENS direction where the customers want to monitor.

1) Turn the STOPPER RING counter-clockwise as shown in the

illustration to move the LENS body and COVER LENS.

2) Move the LENS body to adjust the vertical direction and turn

the LENS body together with the COVER

LENS to adjust the horizontal direction.

(There is a stopping mechanism on the

COVER LENS so that the LENS cannot be

turned more than 180° degrees to either left or right.

Excessive rotation of the LENS may twist the inside wiring

and cause damage such as a short circuit or broken wire.)

☛ The BOTTOM marking of the LENS must face downward.

(Otherwise, the image may look tilted or inversed.)

3) Position the LENS in the desired direction, hold the COVER-

LENS with one hand, and tightly fasten the STOPPER RING

clockwise with the other hand so that the LENS is not loose.

7. If the interior and exterior of the DOME is dirty, wipe off dirt with

a soft cotton flannel cleaning cloth.

8. After assembling the DOME COVER in the correct

direction, fasten the CASE fixing BOLT by turning it

clockwise with a L WRENCH. (4 spots)

9. Once the camera is installed, connect one end of the

cable to the camera and the other end to other acces-

sory equipment or to the back of the monitor.

COVER-

LENS

BODY

STOPPER-

RING

SOC-920(P) - Pin Configuration

1DATA+

2 VIDEO_OUT

3 GND

4DATA-

5 AUDIO_OUT

6 VDD

7 GND_V

8 CH_SEL

8 ... 1

00351A SOC-920P-eng 11/19/03 3:15 PM Page 14

E

16

SOC-920(P) - Product Specifications

ITEM

DESCRIPTION

SOC-920P SOC-920

Product Type

Anti-Vandal Dome Camera Anti-Vandal Dome Camera

Power Source Voltage

DC12~18V From Monitor DC12~18V From Monitor

Power Consumption

Approx. 6W Approx. 6W

Broadcast System

PAL Standard Color System NTSC Standard Color System

Imaging Device

1/4 inch IT S-HAD CCD 1/4 inch IT S-HAD CCD

Effective Pixel

752(H) X 582(V) 768(H) X 494(V)

Scanning Method

625 Line, 2:1 Interlace 525 Line, 2:1 Interlace

Line Frequency

Horizontal:15,625 Hz Horizontal:15,734 Hz

Vertical : 50 Hz Vertical : 60 Hz

Synchronization Method

INT INT

Resolution

480 TV Lines 480 TV Lines

S/N Ratio

Over 50dB (AGC Off) Over 48dB (AGC Off)

Minimum Scene Illumination

2 Lux (Sense Up Off) 2 Lux (Sense Up Off)

0.02 Lux (Sense Up x128) 0.02 Lux (Sense Up x128)

Color Temperature

ATW/AWC/Manual MODE ATW/AWC/Manual MODE

(3200°K, 5600°K, R/B Gain Control) (3200°K, 5600°K, R/B Gain Control)

Electronic Shutter

Off, 1/120, 1/250, 1/500, Off, 1/100, 1/250, 1/500,

1/1K, 1/2K, 1/4K, 1/10K sec 1/1K, 1/2K, 1/4K, 1/10K sec

Back Light Compensation

Off/On (Area Setting) Off/On (Area Setting)

Sense Up

Off/Auto x2~x128/Fix x2~x128 Off/Auto x2~x128/Fix x2~x128

Digital Zoom

Off, x2, x4, x6, x8, x10 Off, x2, x4, x6, x8, x10

Motion Detection

Off/On (Area/Sensitivity Setting) Off/On (Area/Sensitivity Setting)

Video Control

POSI/NEGA, MIRROR, Detail Setting POSI/NEGA, MIRROR, Detail Setting

Signal Output

Composite Video Out : 1.0 Vp-p 75 ohms/RJ45 Composite Video Out : 1.0 Vp-p 75 ohms/RJ45

Lens

Focal length : 3.6 ~ 43.2 mm Focal length : 3.6 ~ 43.2 mm

Aperture : F1.8(Wide), F2.6(Tele) Aperture : F1.8(Wide), F2.6(Tele)

Operating Temperature

-10°C ~ +50°C -10°C ~ +50°C

Operating Humidity

~90% ~90%

Physical Size

132(ø) x 95.3(H) mm 132(ø) x 95.3(H) mm

Weight

Approx. 1 Kg Approx. 1 Kg

00351A SOC-920P-eng 11/19/03 3:15 PM Page 16

F

CAMÉRA DÔME ANTI-VANDALISME

SOC-920(P)

Manuel d’installation

00351A SOC-920P-fra 11/19/03 2:48 PM Page 1

Page is loading ...

Es

CÁMARAANTIVANDÁLICATIPO DOMO

SOC-920(P)

Manual de instalación

00351A SOC-920P-spa 11/19/03 2:56 PM Page 1

Page is loading ...

ANTI-VANDAL DOME CAMERA

SOC-920(P)

Installationsvejledning

DK

00351A SOC-920P-DK 11/19/03 2:58 PM Page 1

Page is loading ...

Samsung SOC-920P User manual

This manual is also suitable for

Samsung SOC-920P User manual

in other languages

Related papers

Other documents