6 7
EE
✔
Notes on installation and usage
1. Users should not disassemble the camera from
the front direction.
2. Always handle the camera with care.
Please do not apply a shock or vibration as
much as possible and take cautions not to cause
damage or make a scratch on the camera due to
careless storage.
3. Please do not install the camera with the rainy
place or highly humid areas. And do not operate
the camera in the wet place.
4. Do not clean the camera body with the strong
abrasives or soaps. When the camera becomes
dirty, clean it with the dry rugs. Especially, make
sure to use the dedicated rugs for lens to clean
the dome cover.
5. Please select the camera in the cool area that is
not exposed to the direct sunlight. If you do, it
can cause bad effects on the product.
✔
Cable connection
Caution to install SSC-12C/SOD14C outdoors
•
SSC-12C/SOD14C is designed to be protected
from the water drops which are falling on the
upper side of camera in a range of 15
°
.
(Dust-water protection level : IP42)
Therefore, be sure to install it in a location
which is fit in above condition when you install it
outdoor.
SSC-12C/SOD14C camera can be attached to
the wall,ceiling or shelf using the camera mount
bracket (SBR-110).
•
Choose an installation site that can sufficiently
support the weight of the equipments to be
installed.
•
Attach the camera mount bracket to the wall or
ceiling using the supplied three screws (M4 X L15).
•
Adjust the camera to target the video location
and tighten the bracket handle on the camera
mount bracket.
SOD14C/12C-eng* 10/17/03 11:20 AM Page 6